• IEIE Transactions on Smart Processing and Computing
• /
• v.1 no.2
• /
• pp.106-116
• /
• 2012

The huge success of location-aware applications has called for the rapid development of an alternative positioning system to the global positioning system (GPS) for indoor localization based on existing technologies, such as 802.11 wireless networks. This paper proposes the Wireless MAC Processor Positioning System (WMPS), which is a localization system running on off-the-shelf 802.11 Access Points and based on the time-of-flight ranging of users' standard terminals. This paper proves through extensive experiments that the propagation delays can be measured with the accuracy required by indoor applications despite the different noise components that can affect the result: latencies of the hardware transreceivers, multipath, ACK jitters and timer quantization. Key to this solution is the choice of the Wireless MAC Processor architecture, which enables a straightforward implementation of the ranging subsystem directly inside the commercial cards without affecting the basic DCF channel access algorithm. In addition to the proposed measurement framework, this study developed a simple and effective localization algorithm that can work without requiring any preliminary calibration or device characterization. Finally, the architecture allows the measurement methodology to be adjusted as a function of the network load or propagation environments at the run time, without requiring any firmware update.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6C
• /
• pp.611-618
• /
• 2009

Recently, an indoor location-aware technology has been focused on as a key technology for context awareness in ubiquitous computing environments. The conventional Cricket system was designed with a non-centralized architecture, which has advantages in terms of user privacy, deployment, scalability, decentralized administration, network heterogeneity, and low cost. In this paper, an indoor location system based on TDOA between RF and ultrasound signals is designed, which improves the Cricket system. A 2.4GHz frequency is employed for transmitting RF messages, which is in an ISM band. The beaconing frequency is doubled to enhance the channel utilization rate. The ultrasonic pulse duration is optimized to increase the coverage of ultrasonic signals. The function of calculating location coordinates is embedded in a listener. The location-update rate and location accuracy are also improved.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.8
• /
• pp.763-771
• /
• 2013

In this paper, the propagation characteristics for ISM(Industrial Scientific and Medical) and TVWS(TV White Space) in indoor building environment are analyzed in comparison with theoretical and experimental results, the excellent propagation characteristics of the TVWS is confirmed. To this end, signals which have center frequencies of 503 MHz and 2.4 GHz are generated in building propagation environment. Through that, received power strength is measured according to the location and measured path loss is analyzed. Theoretical path loss is calculated using Hata, Extended Hata, Extended Hata SRD, ITU-R P.1238 and reliability for channel model in indoor environment is analyzed.

• Journal of IKEEE
• /
• v.2 no.2 s.3
• /
• pp.173-177
• /
• 1998

Under indoor environment, in case that wireless optical LAN does not obtain the line-of-sight between transmitter and receiver, hemi-spherical lens or reflector must be adopted to get broader beam width. The beam tilt and the fluctuations in amplitude and phase of optical signal through indoor-space occur due to the turbulene. This fading often results in unacceptably large bit error probabilities and thus performance degradation of wireless optical communications. In this paper, when the spherical filter at the front-end of transmitter and receiver is used for wireless optical channel not satisfying line-of-sight, the signal-to-noise ratio as to zenithal angle and the effect from the turbulence due to indoor temperature are investigated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1251-1260
• /
• 2008

Diffuse wireless optical communication offers more robust optical links in terms of coverage and shadowing than line-of-sight links. However, traditional diffuse wireless infrared (IR) transceiver systems are more susceptible to multi-path distortion and great power decrease, which results in limiting high-speed performance. Multi-beam is an effective technique to compensate for multi-path distortion in a wireless infrared environment. The goal of this paper is to analyze the transmission characteristics by replacing traditional diffuse system (TDS) which contains single wide angle transmitter and single element receiver by system consisting of three-beam transmitter and non-imaging receiver (TNS) attached with compound parabolic concentrator (CPC). In the simulation, we use the recursive model developed by Barry and Kahn and build the scenario based on 10 different cases which have been listed in Table 1. Moreover, we also check the reliability of the TNS diffuse link channel by BER test on the basis of different receiver positions and room sizes. The simulation results not only show the basic transmission characteristics of TNS diffuse link, but also are references to design more efficient and reliable indoor infrared transmission systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.5
• /
• pp.766-776
• /
• 1999

In this paper to evaluate the performance of the polarization diversity and the space diversity in the indoor environment, we used 3D Ray-tracing simulation. This model is capable of predicting small scale fading characteristics of the channel for evaluating the performances of both the polarization and the space diversity scheme. The measurement and simulation results show that the polarization diversity and the space diversity are expected to be efficiently used for the indoor environments. Moreover, the results show that the proposed polarization diversity technique using directional dual polarization microstrip array antennas has more diversity gain than the conventional polarization and space diversity using dipole antenna.

• Journal of information and communication convergence engineering
• /
• v.13 no.1
• /
• pp.1-6
• /
• 2015

In this study, we consider visible light communication in an indoor line-of-sight environment. It has been proved that among the multiple input multiple output (MIMO) techniques, spatial modulation (SM) performs better than repetition coding (RC) and spatial multiplexing (SMP). On the basis of a combination of SM and pulse amplitude modulation (PAM), here, we propose an enhanced SM algorithm to improve the bit error rate. Traditional SM activates only one light-emitting diode (LED) at one time, and the proposed enhanced SM activates two LEDs at one time and reduces the intensity levels of PAM by half. Under the condition of a highly correlated channel, power imbalance is used to improve the algorithm performance. The comparison between the two schemes is implemented at the same signal-to-noise ratio. The simulation results illustrate that the enhanced SM outperforms the traditional SM in both highly correlated and lowly correlated channels. Furthermore, the proposed enhanced SM scheme can increase the transmission rate in most cases.

• Journal of information and communication convergence engineering
• /
• v.2 no.2
• /
• pp.71-75
• /
• 2004

In non-selective frequency environment, it is difficult to take the advantage of path diversity. In the literature, some methods have been proposed to solve the issue. This paper presents a new method to obtain the resolvable path in Indoor Multi-carrier Code Division Multiple Access (MC-CDMA) system by using downlink beam forming. With the aid of downlink beamforming, the most reliable path is found and chosen for the communication link. The new approach is evaluated in term of bit error rate (BER) and power consumption. The simulation results show that the new approach can get better BER performance. However, the cost of BER improvement is a small degradation in power reservation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.912-918
• /
• 2001

This paper presents a performance analysis of experimental observations of a uplink smart antenna system operating in a wide-band CDMA environment designed for a WLL (Wireless Local Loop) system. The numerical results shown in this paper have been obtained from practical experiments using commercially developed mobile terminals. The beam pattern provided by the weight vector and the resultant BER (Bit Error Rate) are observed in both indoor and outdoor signal environments. From the experimental observations, it is concluded that the proposed smart antenna system provides significant improvements in receiving both indoor and outdoor signal environments.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.269-272
• /
• 2007

In order to expand cell coverage, increase system capacity, and offer various multimedia service with high throughput in indoor environment, WiBro Access Point(AP) is developed. Home AP is IFA/Omni type and has stack-up structure of channel card and RF board. SOHO AP is designed to support up to 2FA and has remote RF(RRF) structure using UTP method. Inter-operational test with mobile terminal were completed for 3 terminals using web browsing service simultaneously. The performance test results of WiBro AP are as follows: RCE(EVM) value is -34.431 dB for 64-QAM and throughput is up to 6.79 Mbps(DL) and 1.1 Mbps(UL) with 2.5m Line-of-Sight(LOS) condition.