• Journal of the Korean institute of surface engineering
• /
• v.48 no.4
• /
• pp.158-162
• /
• 2015

To substitute indium tin oxide (ITO), many substituents have been studied such as metal nanowires, carbon based materials, 2D materials, and conducting polymers. These materials are not good enough to apply to an electrode because theses exhibit relatively high resistance. So metal grids are required as an additionalelectrode to improve the conductivities of substituents. The metal grids were printed by electrohydrodynamic printing system using Ag nanoparticle based ink. The Ag grids showed high uniformity and the line width was about $10{\mu}m$. The Ag nanoparticles are surrounded by dispersants such as unimolecular and polymer to prevent aggregation between Ag nanoparticles. The dispersants lead to low conductivity of Ag grids. Thus, the sintering process of Ag nanoparticles is strongly recommended to remove dispersants and connect each nanoparticles. For sintering process, the interface and microstructure of the Ag grid were controlled in 1.0 torr Ar atmosphere at aound $400^{\circ}C$ of temperature. From the sintering process, the uniformity of the Ag grid was improved and the defects on the Ag grids were reduced. As a result, the resistivity of Ag grid was greatly reduced up to $5.03({\pm}0.10){\times}10^{-6}{\Omega}{\cdot}cm$. The metal grids embedded substrates containing low pressure Ar sintered Ag grids showed 90.4% of transmittance in visible range with $0.43{\Omega}/{\square}$ of sheet resistance.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.111.1-111.1
• /
• 2012

Interest in flexible transparent conducting films (TCFs) has been growing recently mainly due to the demand for electrodes incorporated in flexible or wearable displays in the future. Indium tin oxide (ITO) thin films, which have been traditionally used as the TCFs, have a serious obstacle in TCFs applications. SWNTs are the most appropriate materials for conductive films for displays due to their excellent high mechanical strength and electrical conductivity. In this work, the fabrication by the spraying process of transparent SWNT films and reduction of its sheet resistance on PET substrates is researched Arc-discharge SWNTs were dispersed in deionized water by adding sodium dodecyl sulfate (SDS) as surfactant and sonicated, followed by the centrifugation. The dispersed SWNT was spray-coated on PET substrate and dried on a hotplate. When the spray process was terminated, the TCF was immersed into deionized water to remove the surfactant and then it was dried on hotplate. The TCF film was then was doped with Au-ionic doping treatment, rinsed with deionized water and dried. The surface morphology of TCF was characterized by field emission scanning electron microscopy. The sheet resistance and optical transmission properties of the TCF were measured with a four-point probe method and a UV-visible spectrometry, respectively. This was confirmed and discussed on the XPS and UPS studies. We show that 87 ${\Omega}/{\Box}$ sheet resistances with 81% transmittance at the wavelength of 550nm. The changes in electrical and optical conductivity of SWNT film before and after Au-ionic doping treatments were discussed. The effect of Au-ion treatment on the electronic structure change of SWNT films was investigated by Raman and XPS.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.1
• /
• pp.40-44
• /
• 2017

The effect of weak dielectric silicone dioxide($SiO_2$) embedded in polyfluorene(PFO) emitting layer of polymer-based multi structure OLED was investigated. Indium tin oxide(ITO)/poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS)/poly(9,9-di-n-octylfluorenyl-2,7-diyl)(PFO)/2,2,2"-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) (TPBi)/aluminum(Al) structure OLED was fabricated by spin-coating method. Applied electric field causes some effect on $SiO_2$ in PFO layer. Thus, interaction between polymers and affected $SiO_2$ might generate electrical and luminance properties change. Experimental results, show the reduced threshold voltage of 6 V(from 23 V to 17 V). The maximum current density was rather increased from $71A/m^2$ to $610A/m^2$ and maximum brightness was also increased from $7.19cd/m^2$ to $41.03cd/m^2$, 9 and 6 times each. Additionally we obtained colour broadening result due to the increasing of blue-green band emission. Consequently we observed that electrical and luminance properties are enhanced by adding $SiO_2$ and identified the possibility of controlling the emission colour of OLED device according to colour broadening.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.3
• /
• pp.124-129
• /
• 2015

Organic electronics are the domain in which the components and circuits are made of organic materials. This new electronics help to realize electronic and optoelectronic devices on flexible substrates. In recent years, organic materials have replaced conventional semiconductors in many electronic components such as, organic light-emitting diodes (OLEDs), organic field-effect transistors (OFETs) and organic photovoltaic (OPVs). It is well known that organic light emitting diodes (OLEDs) have many advantages in comparison with inorganic light-emitting diodes LEDs. These advantages include the low price of manufacturing, large area of electroluminescent display, uniform emission and lower the requirement for power. The aim of this paper is to model polymer LEDs and OLEDs made with small molecules for studying the electrical and optical characteristics. The purpose of this modeling process is, to obtain information about the running of OLEDs, as well as, the injection and charge transport mechanisms. The first simulation structure used in this paper is a mono layer device; typically consisting of the poly (2-methoxy-5(2'-ethyl) hexoxy-phenylenevinylene) (MEH-PPV) polymer sandwiched between an anode with a high work function, usually an indium tin oxide (ITO) substrate, and a cathode with a relatively low work function, such as Al. Electrons will then be injected from the cathode and recombine with electron holes injected from the anode, emitting light. In the second structure, we replaced MEH-PPV by tris (8-hydroxyquinolinato) aluminum (Alq₃). This simulation uses, the Poole-Frenkel -like mobility model and the Langevin bimolecular recombination model as the transport and recombination mechanism. These models are enabled in ATLAS- SILVACO. To optimize OLED performance, we propose to change some parameters in this device, such as doping concentration, thickness and electrode materials.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.200-200
• /
• 1999

^g , pp V (Poly-para phenylene vinylene) 유도체와^g , pp P(Poly-para phennylene) 유도체에 Ar, H2, N2 및 O2 등의 이온을 조사하여 PL(Photoluminescence)의 변화를 실험하였다. 각각의 전도성 고분자는 ITO9indium tin oxide)가 증착되어 있는 유리기판위에 spin coating을 하였으며 이렇게 처리된 전도성 고분자의 표면에 이온을 조사하였다. 여기에서 조사된 이온의 가속 에너지는 300eV에서 700eV까지 변화시켰고 이온 조사량은 1$\times$1013ions/cm2에서 1$\times$1017ions/cm2까지 변화시켰다. 이때 이온빔의 전류밀도는 0.2$\mu\textrm{A}$/$\textrm{cm}^2$이하로 고정하였으며 chamber내의 진공도는 $1.5\times$10-4Torr를 유지하였다. 이온 빔처리후 불안정한 고분자의 표면이 대기와 반응하는 것을 어느정도 방지하기 위해 이온 빔으로 처리된 시료를 chamber의 내부에 일정시간동안 방치하였다. Ar, H등의 이온으로 처리된 MEH-PPV의 경우는 PL의 세기가 감소하였고 이온 조사량이 1016ions/cm2 보다 클 때 PL의 세기는 급속히 감소하였다.^g , pp V와^g , pp P 유도체의 경우는 특정 이온 조사량에서 PL의 증가현상을 보였는데^g , pp P 도체중에서 P3의 경우를 보면 이온 빔 에너지가 300eV이고 이온 전류 밀도가 0.05$\mu\textrm{A}$/$\textrm{cm}^2$인 N2이온을 조사하면 이온 조사량이 1$\times$1013ions/cm2가 될 때 PL의 세기가 39%까지 증가하였다. PL의 변화에 대한 비교를 위해 이온빔으로 처리된 시료와 처리되지 않은 시료의 UV흡수스펙트럼과 IR 흡수 스펙트럼을 분석하였다. 본 실험에 사용된 모든 시료의 PL 세기는 1016ons/cm2이상의 dose에서 급격한 감소 현상을 나타내었고 PL의 최대값을 나타내는 파장의 이동은 관찰되지 않았다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.430-430
• /
• 2007

In this study, the nematic liquid crystal (NLC) alignment effects treated on the ZnO thin film layers using ion beam irradiation were successfully studied for the first time. The ZnO thin films were deposited on indium-tin-oxide (ITO) coated glass substrates by rf-sputter and The ZnO thin films were deposited at the three kinds of rf power. The used DuoPIGatron type ion beam system, which can be advantageous in a large area with high density plasma generation. The ion beam parameters were as follows: energy of 1800 eV, exposure time of 1 min and ion beam current of $4\;mA/cm^2$ at exposure angles of $15^{\circ}$, $30^{\circ}$, $45^{\circ}$, and $60^{\circ}$. The homogeneous and homeotropic LC aligning capabilities treated on the ZnO thin film surface with ion beam exposure of $45^{\circ}$ for 1 min can be achieved. The low pretilt angle for a NLC treated on the ZnO thin film surface with ion beam irradiation for all incident angles was measured. The good LC alignment treated on the ZnO thin film with ion beam exposure at rf power of 150 W can be measure. For identifying surfaces topography of the ZnO thin films, atomic force microscopy (AFM) was introduced. After ion beam irradiation, test samples were fabricated in an anti-parallel configuration with a cell gap of $60{\mu}m$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.307-310
• /
• 1999

Using Se as a photoconductive element and ZnS as a luminescent element, a Se/ZnS thin film device for light amplifier applications was fabricated and its characteristics were investigated. The Se/ZnS thin film light amplifier was fabricated by evaporating the ZnS thin film on an ITO(Indium Tin Oxide) glass and the Se thin film on the ZnS thin film in sequence. The results of the characteristics investigation are summarized as follows: (1) When the frequency of an excitation voltage was increased, both the brightness response and the brightness saturation of the Se/ZnS thin film light amplifier began to start at a higher light input. (2) The gain of the Se/ZnS thin film light amplifier was dependent upon the amplitude and the frequency of the excitation voltage as well as an external light input. (3) When the Se/ZnS thin film light amplifier was excited by a direct current of a constant voltage, the frequency of the output brightness was\\`equal to the frequency of the input light applied. When the light amplifier was excited by a sinusoidal voltage of 60 Hz, the frequency of the output brightness was 120 Hz.

• Macromolecular Research
• /
• v.16 no.4
• /
• pp.337-344
• /
• 2008

The following series of blue EL polymers was synthesized using the Suzuki polymerization method: poly(3',6'-bis(3,7-dimethyloctyloxy)-9,9'-spirobifluorene-2,7-diyl) poly[$(OC_{10})_2$-spirobifluorene], poly{3',6'-bis(3,7-dimethyloctyloxy)-9,9'-2,7-diyl-co-4-(3,7-dimethyloctyloxy) phenyl-diphenylamine-4',4'-diyl} poly[$(OC_{10})_2$-spirobifluorene-TPA] (5:1, 9:1) and poly{3',6'-bis(3,7-dimethyloctyloxy)-9,9'-spirobifluorene-2,7-diyl-co-4-(6-((3-methyloxetan-3-yl)methoxy)hexyloxyphenyl-bisphenylamine-4',4'-diyl) poly[$(OC_{10})_2$-spirobifluorene-TPA-oxetane]. The weight average molecular weight (Mw) and polydispersity of the resulting polymers ranged from $1.6{\times}10^4-1.5{\times}10^5$ and 1.77-2.31, respectively. The resulting polymers were completely soluble in common organic solvents and were easily spin-coated onto an indium tin oxide (ITO) substrate. The polymers exhibited strong blue emission peaking at 450 nm. The maximum brightness and luminance efficiency were $9,960\;cd/m^2$ and 1.2 cd/A, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.197-197
• /
• 2010

본 연구에서는 RF/DC dual 마그네트론 스퍼터 시스템을 이용하여 Glass 기판 상에 유기태양전지용 Nb-doped $TiO_2$ (NTO)/Ag/NTO 다층 투명전극을 성막하고 이 다층 투명전극을 $200^{\circ}C{\sim}700^{\circ}C$ 온도 범위에서 급속 열처리 (Rapid Thermal Annealing ; RTA)를 통하여 전기적, 광학적, 구조적 및 표면의 특성 변화를 연구하였다. Hall effect measurement, UV-Vis spectrometer, FESEM 분석을 통하여 다층투명전극의 전기적, 광학적, 표면분석을 하였고 Synchrotron 분석을 통하여 온도에 따른 구조변화를 분석하였다. 상온에서 성막된 다층투명전극은 30nm 두께의 NTO 박막 사이에 얇은 9nm의 얇은 Ag 층을 삽입한 구조로써 10ohm/square 이하의 매우 낮은 면저항과 ${\sim}10^{-5}\;ohm-cm$ 의 비저항, Anti-reflection 효과에 의해 85% 이상의 높은 광투과성을 나타내었다. RTA 온도가 증가함에 따라 전기적, 광학적 특성은 약간 향상되었고 비정질 구조를 유지함을 알 수 있었다. 그러나 높은 온도범위에서는 비정질 구조에서 Anatase 상으로 결정구조가 변화함을 알 수 있었고 전기적, 광학적 특성이 감소됨을 알 수 있었다. NTO/Ag/NTO 다층 투명전극을 유기태양전의 Anode로 적용하여 특성을 비교한 결과 RTA 온도가 증가함에 따라 유기태양전지의 효율 또한 증가하였고 최적화된 온도 조건에서 2.49% 의 높은 효율을 얻을 수 있었다. 이를 통해 우수한 특성을 나타내는 NTO/Ag/NTO 다층투명전극이 기존의 디스플레이 및 태양전지 등의 투명전극 재료로 주로 사용되어 온 ITO (Indium Tin Oxide) 를 대체 할 수 있는 재료로써의 가능성을 제시하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.97-97
• /
• 2010

We demonstrate the hybrid polymer-quantum dot based multi-functional device (Organic bistable devices, Light-emitting diode, and Photovoltaic cell) with a single active-layer structure consisting of CdSe/ZnS semiconductor quantum-dots (QDs) dispersed in a poly N-vinylcarbazole (PVK) and 1,3,5-tirs- (N-phenylbenzimidazol-2-yl) benzene (TPBi) fabricated on indium-tin-oxide (ITO)/glass substrate by using a simple spin coating technique. The multi-functionality of the device as Organic bistable device (OBD), Light Emitting Diode (LED), and Photovoltaic cell can be successfully achieved by adding an electron transport layer (ETL) TPBi to OBD for attaining the functions of LED and Photovoltaic cell in which the lowest unoccupied molecular orbital (LUMO) level of TPBi is positioned at the energy level between the conduction band of CdSe/ZnS and LiF/Al electrode (band-gap engineering). Through transmission electron microscopy (TEM) study, the active layer of the device has a p-i-n structure of a consolidated core-shell structure in which semiconductor QDs are uniformly and isotropically adsorbed on the surface of a p-type polymer core and the n-type small molecular organic materials surround the semiconductor QDs.