• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.6
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• Journal of Distribution Science
• /
• v.14 no.2
• /
• pp.73-82
• /
• 2016

Purpose - Counterproductive work behavior(CWB) was typically categorized according to the behavior whether it targets other people(i.e., interpersonal CWB: I-CWB). Employing organizations(i.e., organizational CWB: O-CWB) has emerged as major concerns among researchers, managers, and the general public. An abundance of researches has informed us about the understanding for the antecedents of CWB, whereas little is known about the antecedents of CWB directed distribution service in employee's emotional labor. Therefore, the purpose of this research is to propose a research model in which surface acting enhances emotional exhaustion as an emotional labor strategy, which eventually increases counterproductive work behavior(including I-CWM and O-CWB). Research design, data, and methodology - This empirical research data were gathered from the samples of full time frontline hotel employees(including front office, call center, food/beverage, concierge, and room service) in South Korea. Six hotels were selected ranged from four to five stars, including privately owned and joint-venture properties. A convenience sampling method was used to select hotels. Full time frontline hotel employees from the six hotels were surveyed using a self-administered instrument for data collection. With the strong support of hotel managers, a total of 300 questionnaires were distributed, and 252 responses were collected indicating a response rate of 84.0%. In the process of working with the 252 samples, structural equation modeling is employed to test research hypotheses(H1: The relationship between surface acting and Interpersonal counterproductive work behavior(I-CWB) is mediated by emotional exhaustion, H2: The relationship between surface acting and organizational counterproductive work behavior(O-CWB) is mediated by emotional exhaustion). SPSS 18.0 and M-Plus 7.31 software were used for the data analysis. Descriptive statistics were used to assess the distribution of the employee profiles and correlations between factors. M-Plus 7.31 software was used to test the model fit, validity, and reliability of the factors, significance of the relationship between factors, and the effects of factors in the model. Results - To test our mediation hypotheses, we used an analytical strategy suggested by Preacher & Hayes (2008) and Shrout & Bolger (2002). This mediation approach directly tests the indirect effect between the predictor and the criterion variables through the mediator via a bootstrapping procedure. Thus, it addresses some weaknesses associated with the Sobel test. We found that surface acting was positively related to emotional exhaustion. Furthermore, emotional exhaustion was a significant predictor from the two kinds of counterproductive work behavior. In addition, surface acting was not significantly associated with the two kinds of counterproductive work behavior. These results indicated that the surface acting by frontline hotel employees was associated with higher emotional exhaustion, which is related with higher interpersonal counterproductive work behavior(I-CWB) and organizational counterproductive work behavior(O-CWB). In sum, we confirmed that the positive relationship between surface acting and the two kinds of counterproductive work behavior was fully mediated by emotional exhaustion. Conclusions - The current research broadens the conceptual work and empirical studies in counterproductive work behavior literature by representing a fundamental mechanism that how surface acting affects counterproductive work behavior.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.225-231
• /
• 2020

Fresh water that can be used by a person of the total amount of water on the planet is increased because it is less than 0.01 % except underground water, ice and snow, etc. water management response need. In order to protect and efficiently utilize water resources, major countries are conducting water footprint studies that can quantitatively estimate the amount of water put into the operating phase of the resource harvesting phase, mainly agriculture. Korea has also recently developed a number of policies in order to cope with water shortages, and in the construction industry, as well as the need for basic research to support it has been emphasized. This study was constructed DB up to the raw material harvesting step, the transport step, the production stage in order to estimate the water consumption of resources to be put into the work process to target the drainage of the road. Water usage estimation method was utilized the method presented in the Water Footprint Manual and the environmental score card certification guide, unit water usage each drainage main method was calculated after estimating the water footprint considering the water character factor, indirect water and the direct water, the water consumption factor of material input to each process. Brown asphalt, rebar, remicon of the drainage material as a result of the water footprint calculation accounted for 97 % of the total. Drainage method is a culvert, a side channel, a culvert wing wall, reinforced concrete open channel accounted for 92.2 % of the total. Drainage total step-by-step calculated water consumption and water footprint was found in order of raw material harvesting step, transport stage, production stage. Water footprint each drainage method or total drainage material calculated in this study can be used as a base data in the agricultural and construction sectors. In order to increase the reliability of the analysis, it is believed that further overseas databases will be needed for continuous review and research.

• Journal of Korean Academy of Nursing
• /
• v.29 no.1
• /
• pp.161-173
• /
• 1999

The purpose of this study was to develope and test the structural model for quality of life in women having hysterectomies. A hypothetical model was constructed on the basis of previous studies and a review of literature. The conceptual framework was built around eight constructs. Exogenous variables included in this model were marital intimacy, importance of uterus, professional support, positive coping behavior and pre-operative symptoms. Endogenous variables were spouse's support, sense of loss and quality of life. Empirical data for testing the hypothetical model was collected using a self-report questionnare from 203 women having hysterectomies at the outpatient clinics of four general hospitals and a mail survey in Pusan City. The Data was collected from December, 1997 to January, 1998. Reliability of the eight instruments was tested with Cronbach's alpha which ranged from 0.639-0.915. For the data analysis, SPSS 7.5 WIN Program and LISREL 8.12 WIN Program were used for descriptive statistics and covariance structural analysis. The results of covariance structure analysis were as follows : 1. Hypothetical model showed a good fit with the empirical data. ［$\chi$$^2$＝6.93(df＝5, P＝.23), GFI＝.99, AGFI＝.94, RMSR＝.019, NNFI＝.97, NFI＝.98, CN＝440, standardized residuals(-2.14-2.10)］ 2. For the parsimony of model, a modified model was constructed by deleting 3 paths and adding 1 path according to the criteria of statistical significance and meaning. 3. The modified model also showed a good fit with the data. ［$\chi$$^2$＝5.26(df＝7, P＝.63), GFI＝.99, AGFI＝.97, RMSR＝.014, NNFI＝1.02, NFI＝.99, CN＝710, standardized residuals(-1.46-1.70)］ Results of the testing of the hypothesis were as follows : 1. Marital intimacy(${\gamma}$11＝.78, t＝14.37) and professional support(${\gamma}$13＝.12, t＝2.12) had a significant direct effect on the spouse's support. 2. Pre-operative symptoms(${\gamma}$25＝.32, t＝3.12), importance of uterus(${\gamma}$22＝.20, t＝2.61) and spouse's support($\beta$2l＝-.19, t＝-2.43) had a significant direct effect on the sense of loss. 3. Sense of loss($\beta$32＝-.66, t＝-9.83) had a direct effect on the quality of life. Marital intimacy had a direct(${\gamma}$31＝.19, t＝3.33), indirect(${\gamma}$31＝.14, t＝2.52) and total effect(${\gamma}$31＝.25, t＝4.41) on the quality of life. Professional support had a direct effect(${\gamma}$33＝.11, t＝2.07) and total effect(${\gamma}$33＝.13, t＝2.31) on the quality of life. The direct effect of pre-operative symptoms(${\gamma}$35＝-.36, t＝4.02) and positive coping behavior(${\gamma}$34＝.15, t＝2.06) had the insignificant effect on the quality of life while, due to the idirect effect these variables had overall significant effect on the quality of life. The results of this study showed that the sense of loss had the most significant direct effect on the quality of life. Marital intimacy, pre -operative symptoms and spouse's support had a significant direct effect on this sense of loss. These four variables, the sense of loss, marital intimacy, pre-operative symptoms and spouse's support, were identified as relatively important variables. The results of this study suggested that there is needed to determine if nursing intervention would alleviate this sense of loss and promote a greater quality of life in women who have had hysterectomies.

• Journal of Communication Design
• /
• v.68
• /
• pp.278-288
• /
• 2019

The purpose of this study is to analyze the effects of risk and convenience on purchase intention in the IOT market, and I want to analyze the moderating effect of emotional consumption value. In this study, two products were selected from three product groups. There are three major methods of research. First, theoretical considerations. Second, survey analysis. Reliability analysis and factor analysis were performed using descriptive statistics using SPSS. Third, we measured changes of EEG according to in - depth interview and indirect experience. As a result of the hypothesis of this study, it was confirmed that convenience of use of IoT product influences purchase intention. Risk was predicted to have a negative effect on purchase intentions, but not significant in this study. This implies that IoT products tend to be neglected in terms of monetary loss such as cost of purchase, cost of use, and disposal cost when purchasing. In-depth interviews and EEG analysis revealed that there is a desire to purchase and try out the IoT product due to the nature of the product, the novelty of new technology, and the vague idea that it will benefit my life. The aesthetic, symbolic, and pleasure factors, which are sub - elements of emotional consumption value, were found to have a great influence. This is consistent with previous research showing that emotional consumption value has a positive effect on purchase intention. In-depth interviews and EEG analyzes also yielded the same results. This study has revealed that emotional consumption value affects the intention to purchase IoT products. It seems that companies producing IoT products need to concentrate on marketing with more emotional consumption value.

• Journal of Distribution Research
• /
• v.16 no.2
• /
• pp.57-94
• /
• 2011

Nowadays, it is common that most consumers are purchasing goods in e-stores. The e-stores eager to attract, revisit, retain, and finally convert them into loyal customers. The e-store marketers have planned and executed numerous marketing efforts. As one of the marketing activities, e-store managers attempt to build web sites that meet customers' functional and psychological needs. A wide array of studies has been done to identify factors that could affect customers' response of web sites. Majority of studies were conducted to verify technology-related and functional variables of the website which facilitate transactions and enhance customer responses such as purchase intention and website loyalty. However, there has been little research on the external cues of website and psychological variables of consumer that could have positive influences on customer response. The purpose of this study is to investigate the influence of e-store personality on e-store loyalty through mediating variables such as e-store identification, e-store trust, and e-store engagement. The authors of this study develop the model and set up the six main hypotheses and a set of sub-hypotheses based on a literature review, shown in