• 한국대기환경학회지
• /
• 제9권1호
• /
• pp.93-100
• /
• 1993

This study was carried out to investigate the relationship between the traffic signal systmes and the air pollutants emitted by the motor vehicles at Kangnam Intersection. One of the most important measures of effectiveness (MOE) in traffic studies is the delay to vehicles in the system. Delay represents indirect costs to the motorist in terms of time loss and a direct cost in terms of fuel consumption during idling. The results of TRANSYT-7F modeling was correlated among delay, fuel consumption and total travel tiem. Air pollutants emission rate can be calculated by the results of modeling and the Korean type emission factor. As expected the highest emissions, for air pollutants, are observed during the morning rush hours (07 : 00-10 : 00). For better results of modeling, the TRANSYT-7F model needs to modify for the Korean type of traffic model. The results of this study indicate that the variation of air pollutants emission rates were closely related to the traffic signal system.

• 자원ㆍ환경경제연구
• /
• 제22권3호
• /
• pp.459-479
• /
• 2013

본 논문에서는 중국 정부가 추진하고 있는 '저탄소 지속가능한 성장'의 실현가능성을 개진하는 데 있어서 탄소배출권 거래 시범지역으로 지정된 7개 지역 가운데 북경시, 중경시 제조업 24개 부문을 대상으로 각 지역별로 투입물거리함수를 추정하여 기술효율성, $CO_2$ 암묵가격, 투입요소 간 간접 모리시마 대체탄력성 등을 측정하여 이를 토대로 업종 간, 지역 간 최대 $CO_2$ 잠재감축량, 탄소배출권 거래의 비용절감효과, 자본 투자로 인한 $CO_2$ 감축의 잠재적 성과 등을 비교, 분석하였다. 2010년 현재 북경시, 중경시 제조업은 100% 기술효율성 달성을 통하여 $CO_2$ 배출량을 각각 최대 516만 톤, 1,704만 톤까지 감축가능한 것으로 추산되었다. 평균적으로 탄소배출권 거래의 한계저감비용 절감효과는 중경시에서, 자본 투자의 $CO_2$ 감축효과 가능성은 북경시에서 더 높게 나타났다.

• 유기물자원화
• /
• 제32권2호
• /
• pp.37-48
• /
• 2024

하수처리장은 공공부문 온실가스 목표 관리제 대상 시설로 탄소 배출량 감축이 시급하다. 하지만 최근 하수도 통계에 의하면 하수처리량에 대한 CO₂ 배출량은 2020년 대비 3.03 % 감소하였으며 이는 국가 온실가스 감축목표(NDC)를 충족하기에는 상당히 부족한 수치이다. 생물반응조에서 발생하는 직접 배출 온실가스와 하수처리과정에서 이용되는 에너지로 인한 간접배출 온실가스 두 가지를 모두 고려한 총 CFP (Carbon Footprint)를 최소화하는 생물반응조 운전 조건을 찾기 위해 EQPS라는 시뮬레이션 프로그램을 이용하여 연구를 수행하였다. 4-stage BNR 공법 하수처리장 생물반응조 내부반송율을 유입 수량의 100 %로 설정했을 때 총 CFP가 설계 운전 조건 대비 약 10.97 % 감소함을 확인하였다. 또한 대상 처리장의 N₂O EF(Emission Factor)를 계산한 결과 0.138~0.199 %로 IPCC에서 제시한 기본값 1.6 %보다 낮은 값임을 파악하였다. 본 연구는 생물반응조 운전 조건 최적화를 통해 하수처리시설의 총 CFP를 최소화하는 방안을 제시하며, N₂O 배출 감소를 위한 추가 연구의 필요성을 강조하고 있다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 추계학술발표회
• /
• pp.44-52
• /
• 2002

Low temperature thermal desorption (LTTD) has become one of the cornerstone technologies used for the treatment of contaminated soils and sediments in the United States. LTTD technology was first used in the mid-1980s for soil treatment on sites managed under the Comprehensive Environmental Respones, Compensation and Liability Act (CERCLA) or Superfund. Implementation was facilitated by CERCLA regulations that require only that spplicable regulations shall be met thus avoiding the need for protracted and expensive permit applications for thermal treatment equipment. The initial equipment designs used typically came from technology transfer sources. Asphalt manufacturing plants were converted to direct-fired LTTD systems, and conventional calciners were adapted for use as indirect-fired LTTD systems. Other innovative designs included hot sand recycle technology (initially developed for synfuels production from tar sand and oil shale), recycle sweep gas, travelling belts and batch-charged vacuum chambers, among others. These systems were used to treat soil contaminated with total petroleum hydrocarbons (TPH), polycyclic aromatic hydrocarbons (PAHs), pesticides, polychlorinated biphenyls (PCBs) and dioxin with varying degrees of success. Ultimately, performance and cost considerations established the suite of systems that are used for LTTD soil treatment applications today. This paper briefly reviews the develpoment of LTTD systems and summarizes the design, performance and cost characteristics of the equipment in use today. Designs reviewed include continuous feed direct-fired and indirect-fired equipment, batch feed systems and in-situ equipment. Performance is compared in terms of before-and-after contaminant levels in the soil and permissible emissions levels in the stack gas vented to the atmosphere. The review of air emissions standards includes a review of regulations in the U.S. and the European Union (EU). Key cost centers for the mobilization and operation of LTTD equipment are identified and compared for the different types of LTTD systems in use today. A work chart is provided for the selection of the optmum LTTD system for site-specific applications. LTTD technology continues to be a cornerstone technology for soil treatment in the U.S. and elsewhere. Examples of leading-edge LTTD technologies developed in the U.S. that are now being delivered locally in global projects are described.

• KIEAE Journal
• /
• 제14권2호
• /
• pp.87-98
• /
• 2014

This study is to identify quantitatively the function of carbon dioxide emissions reduction due to temperature and energy reduction according to direct carbon dioxide storage, shade provision, and evaportanspiration of urban park. According to the result of study, landscape tree indicated high carbon dioxide storage effect compare to bush, in which broadleaf tree indicated higher storage function than coniferous tree. It is believed to be the storage of carbon dioxide can be increased by increasing the composition rate of forest plants in the urban park. According to the direct estimation result of carbon dioxide storage in terms of example area, storage of carbon dioxide is estimated to be "seoul a zone" $476,818.8kg{\cdot}CO_2/m^2yr$, "anyang b zone" $186,435.7{\cdot}CO_2/m^2yr$, "daejeon c zone" $262,826{\cdot}CO_2/m^2yr$, "kwangju d zone" $231,657.8{\cdot}CO_2/m^2yr$. The carbon dioxide storage per unit area estimated to be "seoul a zone" $3.4{\cdot}CO_2/m^2yr$, "anyang b zone" $5.0{\cdot}CO_2/m^2yr$, "daejeon c zone" $2.6{\cdot}CO_2/m^2yr$, "kwangju d zone" $5.6{\cdot}CO_2/m^2yr$. The result of indirect carbon dioxide reduction effect estimated to be "seoul a zone" $291,603.4{\cdot}CO_2/m^2yr$, "anyang b zone" $165,462.4{\cdot}CO_2/m^2yr$, "daejeon c zone" $141,719.2{\cdot}CO_2/m^2yr$, "kwangju d zone" $154,803.4{\cdot}CO_2/m^2yr$. Carbon dioxide reduction potential amount through the urban park was increased to 1.6 times to 1.8 times when calculated to the indirect effect.

• 한국환경과학회지
• /
• 제29권7호
• /
• pp.729-737
• /
• 2020

This study estimates the greenhouse gas (GHG) emissions reduction resulting from photovoltaic and wind power technologies using a bottom-up approach for an indirect emission source (scope 2) in South Korea. To estimate GHG reductions from photovoltaic and wind power activities under standard operating conditions, methodologies are derived from the 2006 IPCC guidelines for national GHG inventories and the guidelines for local government greenhouse inventories of Korea published in 2016. Indirect emission factors for electricity are obtained from the 2011 Korea Power Exchange. The total annual GHG reduction from photovoltaic power (23,000 tons CO_2eq) and wind power (30,000 tons CO_2eq) was estimated to be 53,000 tons CO_2eq. The estimation of individual GHGs showed that the largest component is carbon dioxide, accounting for up to 99% of the total GHG. The results of estimation from photovoltaic and wind power were 63.60% and 80.22% of installed capacity, respectively. The annual average GHG reductions from photovoltaic and wind power per year per unit installed capacity (MW) were estimated as 549 tons CO_2eq/yr·MW and 647 tons CO_2eq/yr·MW, respectively. Finally, the results showed that the level of GHG reduction per year per installed capacity of photovoltaic and wind power is 62% and 42% compared to the CDM project, respectively.

• 자원ㆍ환경경제연구
• /
• 제24권1호
• /
• pp.189-224
• /
• 2015

본 연구는 온실가스 감축목표 업종체계에 따라 산업 부문을 18개 세부 업종으로 구분하여 2004년부터 2011년까지의 에너지 소비량과 온실가스 배출량 변화에 대해 로그평균디비지아지수(Log Mean Divisia Index) 분해분석을 하였다. 산업 부문 에너지 소비량의 증가는 생산효과와 에너지원단위 효과에 기인한 것으로 나타났으며, 구조 효과는 에너지 소비량 감소에 기여하였다. 온실가스 배출량 변화에 있어서도 구조 효과만이 온실가스 배출 감소에 기여한 것으로 나타났다. 하지만 세부 업종별로는 에너지 소비 및 온실가스 배출량에 미치는 요인별 효과가 서로 달랐다. 특히 본 연구에서는 비금속, 조립금속 등 집계된 업종을 기준으로 분석한 기존 연구들과 달리 이들을 감축목표 업종체계에 따라 세분화하여 분석하였다. 분석 결과 비금속의 세부 업종인 시멘트와 조립금속의 세부 업종인 기계업종은 각각 비금속, 조립금속과 서로 다른 분석 결과를 보였다. 따라서 비금속 및 조립금속에 대한 분해분석 결과를 세부 업종들에게 일률적으로 적용할 경우 정책적 오류에 직면할 가능성이 크므로 세부 업종별로 차별화된 정책 대응이 필요하다.

• 대한환경공학회지
• /
• 제34권4호
• /
• pp.280-287
• /
• 2012

본 연구에서는 대학 캠퍼스 단위에서의 온실가스 인벤토리 구축을 위해 한양대학교 안산캠퍼스를 대상으로 직접 배출원(도시가스, 실내등유, 이동연소), 간접 배출원(전력), 기타 배출원(항공, 수도) 세 부분으로 온실가스 배출원을 규명하였으며, 2007년부터 2009년까지 온실가스 배출원별 에너지 사용량에 따른 온실가스 배출량을 산정하였다. 그 결과, 전체 온실가스 배출영역 중 가장 많은 부분을 차지하는 것은 간접배출의 전력부문으로 전체 온실가스 배출량의 56.7% 차지하는 것을 확인하였다. 또한, 대학본부에서 수행 가능한 온실가스 감축시나리오 및 학교구성원이 수행 가능한 온실가스 감축 실천시나리오를 대학환경에 적합하게 설계한 후 LEAP 모델을 이용하여 2007년부터 2020년까지의 온실가스 감축잠재량을 평가하였다. 그 결과, 감축시나리오 적용시 2020년 BAU(배출전망치) 대비 2020년에는 직접배출 중 고정연소에서 63.34 ton $CO_{2eq}/yr$, 이동연소에서 221.1 ton $CO_{2eq}/yr$ 감축되었으며, 간접배출 중 조명에서는 4,637.34 ton $CO_{2eq}/yr$ 온실가스가 감축되는 것으로 산출되었다. 또한, 실천시나리오를 통한 온실가스 감축잠재량은 1293.76 ton $CO_{2eq}/yr$으로 산출되었다. 따라서, 한양대학교 안산 캠퍼스에 감축 실천 시나리오를 모두 적용한다면 2020년에는 2020년 BAU 대비 온실가스를 총 24% 감축할 수 있을 것으로 추정된다.

• 한국자동차공학회논문집
• /
• 제8권6호
• /
• pp.79-86
• /
• 2000

The effects of recirculated exhaust gas on the wears of piston and piston rings were investigated by the experiment with a two-cylinder, four cycle, indirect injection diesel engine operating at an engine load of 75% and an engine speed of 1600 rpm. For the purpose of comparison between the wear rates of two cylinders with and without EGR, the recirculated exhaust gas was sucked into one of two cylinders after the soot contenets in exhaust emissions were removed by an intentionally designed cylinder-type scrubber equipped with 6 water injectors(A water injector has 144 nozzles of 1.0 mm diameter), while only the fresh air was inhaled into the other cylinder. These experiments were carried out on the fuel injection timing fixed at 15.3$^{\circ}$ BTDC. It was found that the wear rate of piston skirt with EGR increased a little bit, but the piston head diameter increased, rather than decreased, owing to soot adhesion and erosion wear, and especially larger with EGR, and that the wear rates of the top and second piston ring(compression ring)thickness with EGR were more than twice the wear rate of top ring in case of no EGR, but the wear rate of oil rings thickness without EGR increased greater than that with EGR.

• 공업화학
• /
• 제3권2호
• /
• pp.201-206
• /
• 1992

Annual amount of plastics waste including rubber and leather waste, generated in 1990 was about 2,600,000 tons. Amount of generation of plastics waste has rapidly increased, but fractions of recycling and incineration have gradually decreased. Recently, two-stage incinerator, consisting of gasifier and gas combustor, draws much attention in Korea. Plastics are gasified in the starved air condition in the gasifier and produced gas is fired in the combustor. Combustion of produced gas is much easier than that of solid plastics, and produces a little pollutants. Standardzation of technology and process automation are still needed, but this incineration technology is in the commercial stage. Next topic concerned with this two-stage incineration will be how to treat complex plastics waste including toxic substances generated from automobiles and household appliances. Pyrolysis, realized by indirect heating in inert atmosphere, can provide high-quality products with minimum emissions. Many plastics are easily decomposed into oil in pyrolysis conditions, which can be utilized as chemical feedstocks, or gasoline or kerosene depending on feed materials and operating conditions. This has been demonstrated in several pilot-scale tests performed in Japan, Germany, etc. Easy removal of HCl from PVC is one of the most decisive merits of pyrolysis process. But in general, further efforts should be made for the process to obtain marketability. The future of pyrolysis process depends on public concern about environmental problems and oil prices.