• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1577-1586
• /
• 2017

The Proportional-Integral-Derivative (PID) controller is still the most widespread control strategy in the industry. PID controllers have gained popularity due to their simplicity, better control performance and excellent robustness to uncertainties. This paper presents the optimal tuning of a PID controller for domestic induction heating systems with a series resonant inverter for controlling the induction heating power. The objective is to design a stable and superior control system by tuning the PID controller with a derivative filter (PIDF) through Fuzzy logic. The paper also compares the performance of the Fuzzy PIDF controller with that of a Ziegler-Nichols PID controller and a fine-tuned PID controller with a derivative filter. The system modeling and controllers are simulated in MATLAB/SIMULINK. The results obtained show the effectiveness and superiority of the proposed Fuzzy PID controller with a derivative filter.

• Earthquakes and Structures
• /
• 제12권4호
• /
• pp.437-448
• /
• 2017

Soft or extreme soft storeys in multi-storied buildings cause localized damage (and even collapse) during strong earthquake shaking. The presence of such soft or extremely soft storey is identified through provisions of vertical stiffness irregularity in seismic design codes. Identification of the irregularity in a building requires estimation of lateral translational stiffness of each storey. Estimation of lateral translational stiffness can be an arduous task. A simple procedure is presented to estimate storey stiffness using only properties of fundamental lateral translational mode of oscillation (namely natural period and associated mode shape), which are readily available to designers at the end of analysis stage. In addition, simplified analytical expressions are provided towards identifying stiffness irregularity. Results of linear elastic time-history analyses indicate that the proposed procedure captures the irregularity in storey stiffness in both low- and mid-rise buildings.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.676-690
• /
• 2019

This paper presents a switched capacitor (SC) based bidirectional dc-dc converter topology for high voltage gain applications. The proposed converter is able to operate with multiple integral voltage conversion ratios based on user input. The architecture of a user-friendly, inductor-less multi-voltage-gain bidirectional dc-dc converter is proposed in this study. The inductor-less or magnetic-less design of the proposed converter makes it effective in higher temperature applications. Furthermore, the proposed converter has a reduced component count and lower voltage stress across its switches and capacitors when compared to existing SC converters. An output impedance analysis of the proposed converter is presented and compared with popular existing SC converters. The proposed converter is simulated in the OrCAD PSpice environment and the obtained results are presented. A 200 W hardware prototype of the proposed SC converter has been developed. Experimental results are presented to validate the efficacy of the proposed converter.

• Earthquakes and Structures
• /
• 제24권3호
• /
• pp.193-204
• /
• 2023

The concept of meta-material-based isolation systems (MMIS) for structural columns has been revisited in the present study in order to enhance the stability of rubber pads by using steel shim reinforced rubber (SSRR) layers. Analytical calculations have shown a significant improvement in the stability of MMIS with SSRR pads. Finite element analysis has also been conducted to further show the reduced response of a bridge with the modified MMIS under excitations having frequencies within the corresponding attenuation zone (AZ) as compared to the response of a conventional bridge without MMIS. FE analysis further shows the stress generated on the bridge with MMIS systems are within safe limits. Finally, a generalized procedure has been developed to design bridge columns with the proposed modified MMIS.

• International Journal of CAD/CAM
• /
• 제4권1호
• /
• pp.33-45
• /
• 2004

In this work, a rational procedure has been formulated for the selection of points approximating slice contours cut in LOM (Laminated Object manufacturing) with first order approximation. It is suggested that the number of points representing a slice contour can be 'minimised' or 'optmised' by equating the horizontal chordal deviation (HCD) to the user-defined surface form tolerance. It has been shown that such optimization leads to substantial reduction in slice height calculations and NC codes file size for cutting out the slices. Due to optimization, the number of contour points varies from layer to layer, so that points on successive layer contours have to be matched by four sided ruled surface patches and triangular patches. The technological problems associated with the cutting out of triangular patches have been addressed. A robust algorithm has been developed for the determination of slice height for optimum and arbitrary numbers of contour points with different strategies for error calculations. It has been shown that optimisation may even lead to detection and appropriate representation of elusive surface features. An index of optimisation has been defined and calculations of the same have been tabulated.

• 유통과학연구
• /
• 제14권2호
• /
• pp.5-12
• /
• 2016

Purpose - The present study examines the interrelationship between various components constituting shopping experience in the context of the Indian shopping malls. Research design, data, and methodology - Extracting components of shopping experience from the literature review, the study used Interpretive Structural Modelling (ISM) to propose a conceptual model. The study adopted a mixed methods research involving theoretical constructs from past research, qualitative assessment of relationship between the constructs and imposing definite order and direction to qualitative relations based on mathematical computations. Results - Proposed model indicates that the five components of shopping experience (ambience, physical infrastructure, convenience, marketing focus and safety and security) do not converge directly into shopping experience. Rather, they operate following a hierarchy of influences in which marketing focus plays the role of the initiator. Conclusions - This model points at the order of preference of different components of shopping experience and can be a useful guide for retail industry, especially mall developers and supermarket/hypermarket, may use the findings in key decisions about development of physical infrastructure, which are based on marketing focus.

• Environmental Engineering Research
• /
• 제25권1호
• /
• pp.104-113
• /
• 2020

Adsorptive breakthrough modelling is essential for design of a sorption packed bed. In this work, breakthrough modelling of the furfural uptake in bagasse fly ash (BFA) packed bed has been performed. Effect of various parameters like bed height (Z = 15-60 cm), flow rate (Q = 0.02-0.04 L/min) and initial furfural concentration (C_o = 50-200 mg/L) on the breakthrough curve of furfural sorption in a BFA packed bed have been studied. Enhanced breakthrough performance was observed for the higher value of Z, and lower values of C_o and Q. For C_o = 100 mg/L, packed bed operated at Q = 0.03 L/min and Z = 60 cm was found to have lowest adsorbent utilization rate of 5.61 g/L with highest breakthrough volume of 14.67 L. Bed depth service time and Thomas models well represented the experimental data points under all experimental conditions. It can be concluded that BFA can be utilized efficiently in continuous system for the removal of furfural. Overall, more than 99% of furfural was adsorbed in BFA packed bed at experimental conditions.

• Asian Journal of Business Environment
• /
• 제5권3호
• /
• pp.5-15
• /
• 2015

Purpose - This paper aims to identify and rank factors that influence impulse buying behavior among shoppers in Dubai. Research design, data, and methodology - Questionnaires were collected from 168 Dubai shoppers using non-probability quota sampling. Factor Analysis was completed to identify factors triggering impulse buying traits. Results - Six antecedent factors were identified: hedonism, in-store influences, product related influences, socialization, promotional activities, and convenience. Surprisingly, product related influences were the most significant in stimulating impulse buying behavior. Conclusions - This research suggests that a multitude of factors affect shopper propensity for impulse buying, with non-economic factors like product and in-store related influences having a significant impact. Hence, retail managers should concentrate on these in merchandising and promotional efforts. Against the backdrop of Dubai, one of the biggest retail destinations, this study contributes to present knowledge on impulse buying behavior. In terms of shopper inclinations and likeliness to purchase products, it highlights how shoppers respond to special in-store displays and discount offerings. For marketers, the findings regarding relative significance of various factors may help in strategies to attract consumers.

• International Journal of CAD/CAM
• /
• 제8권1호
• /
• pp.29-36
• /
• 2009

Domain mapping is a bijective transformation of one domain to another, usually from a complicated general domain to a chosen convex domain. This is directly useful in many application problems like shape modeling, morphing, texture mapping, shape matching, remeshing, path planning etc. A new approach considering the domain as made up of structural elements, like membranes or trusses, is developed and implemented using the nonlinear finite element formulation. The mapping is performed in two stages, boundary mapping and inside mapping. The boundary of the 3-D domain is mapped to the surface of a convex domain (in this case, a sphere) in the first stage and then the displacement/distortion of this boundary is used as boundary conditions for mapping the interior of the domain in the second stage. This is a general method and it develops a bijective mapping in all cases with judicious choice of material properties and finite element analysis. The consistent global parameterization produced by this method for an arbitrary genus zero closed surface is useful in shape modeling. Results are convincing to accept this finite element structural approach for domain mapping as a good method for many purposes.

• The International Journal of Costume Culture
• /
• 제12권1호
• /
• pp.26-37
• /
• 2009

This study has begun as to identify various forms of personified Hindu deitiesand its goal is to understand the symbols of Hindu which are the backgrounds of the modern Hindu culture and present the hairstyle images of ancient Indians through the Hindu deities of the era. Scope of the research has been determined to six major deitiesamong those from Hindu culture that affect the Indian society and the images of Hindu deitiesappeared in the Indian miniatures and sculptures were studied as times changed. The deities could be identified by symbols maintained in common by each divinity as the Hindu deities were diversified through the long history. Examining the transitions in hairstyles and headstyles of Hindu deities, hair shapes of spiraling curls were expressed in the ancient Hindu sculptures from $2^{nd}$ century to $6^{th}$ century due to the influence of early Indian Buddhism. In Hindu paintings from $15^{th}$ century to $19^{th}$ century, beards and sideburns were expressed in male deities due to the influence from Mugul arts, while feminine characters were emphasized in goddesses with long loose hair. Works are each presented encapsulating the results of the researches on Vishnu and Lakshmi from these Hindu deities. It is attempted to find Hindu image and present directions for developments of modern beauty by supplying motives to modern hair design by researching the hairstyles of Hindu deities.