• Korean Journal of Optics and Photonics
• /
• v.6 no.4
• /
• pp.345-351
• /
• 1995

We have studied experimentally the propagation characteristics of fundamental dark spatial solitons on finite-width backgrounds and conpared with the result of numerical simulations. It was verified experimentally that the width of dark solitons decreased but that of background increased as the beam intensity increased. The refractive index change obtained from soliton constant, which is for infinite-width background, was smaller than that from Z-scan method. Numerical simulations of fundamental dark solitons on a finite-width backgrounds showed that the peak intensity of background, the width of dark soliton and the soliton constant varied with the propagation length. If the change of soliton constant on finite-width backgrounds was considered, the refractive index change was in good agreement with that from Z-scan method. ethod.

• Structural Engineering and Mechanics
• /
• v.36 no.4
• /
• pp.463-479
• /
• 2010

Based on damage accumulation of multi-grid composite walls, a method of dynamic reliability estimations is proposed. The multi-grid composite wall is composed of edge frame beam, edge frame columns, grid beams, grid columns and filling blocks. The equations including stiffness, shear forces at filling blocks cracking and multi-grid composite walls yielding, ultimate displacement, and damage index are obtained through tests of 13 multi-grid composite wall specimens. Employing these equations in reliability calculations, procedures of dynamic reliability estimations based on damage accumulation of multi-grid composite walls subjected to random earthquake excitations are proposed. Finally the proposed method is applied to the typical composite wall specimen subjected to random earthquake excitations which can be specified by a finite number of input random variables. The dynamic reliability estimates, when filling blocks crack under earthquakes corresponding to 63% exceedance in 50 years and when the composite wall reach limit state under earthquakes corresponding to 2-3% exceedance in 50 years, are obtained using the proposed method by taking damage indexes as thresholds. The results from the proposed method which show good agreement with those from Monte-Carlo simulations demonstrate the proposed method is effective.

• Journal of Korean Clinical Nursing Research
• /
• v.19 no.1
• /
• pp.33-44
• /
• 2013

Purpose: This study was done to develop a valid and reliable Classification System for Critical Care Nursing (CSCCN) to be used in Intensive Care Units (ICUs). Methods: Head nurses and staff nurses of 17 ICUs in 6 hospitals classified 307 patients to verify interrater reliability. To verify construct validity, the staff nurses classified 404 patients according to CSCCN comparing difference in medical department and type of stay in ICU. For conversion index, 78 patients from 4 ICUs of 'S' hospital were classified and nursing time was measured by 107 nurses and 18 nurse aids using stopwatches. Results: The developed CSCCN has 11 categories, 76 nursing activities and 101 criteria. The reliability was verified as having high agreement (r=.946). The construct validity was verified comparing differences in medical department and type of stay in ICU. According to scores, four groups in the CSCCN classification were identified. According to the conversion index, one score on the CSCCN means 7.2 minutes of nursing time. Conclusion: CSCCN can be used to measure diverse and complex nursing demands including psycho-social aspects of ICU patients and convert nursing demands to numbers.

• International Journal of Highway Engineering
• /
• v.12 no.2
• /
• pp.123-127
• /
• 2010

In this study, the profiles of optimized rehabilitated section was measured by a lightweight inertial profiler, and pavement smoothness was evaluated. To analyze the repeatability of the used lightweight profiler, two repeatable measurements were conducted. The agreement between two repeatable measurements were evaluated by Cross-correlation function. Pavement smoothness of the optimized rehabilitated pavement section and existing area was compared in terms of International Roughness Index and Profilograh Index. In general, the pavement smoothness of the rehabilitated sections was not good compared to the existing pavement sections. The analysis results could be used for the evaluation of pavement smoothness of the optimized rehabilitated pavement sections.

• Korean Management Science Review
• /
• v.21 no.2
• /
• pp.191-213
• /
• 2004

This study addresses the evaluation criteria of multimedia authoring tools(MATs), the way which decision-maker can exclude outlier matrix from group using the concept of the compatibility index, and how AHP can be applied to the selection of MATs in a group decision-making environment. The AHP technique allows an evaluator to quantify the relative importance of elements at each hierarchy and to calculate the composite relative weights for each product(i.e. MATs). This decision process allows setting to priority of the MATs based on the AHP. The results indicated that technical ability of MATs was the most significant factor in affecting their decision, trailed by managerial efficiency and vendor support. To the experts, multimedia data support was the less important than development interface. Also, the results indicated that product A(0.510) was their first choice, trailed by product C(0.286) and B(0.204). Assessing the composite relative weights revealed that expert group's members were consistent with the rankings of decision variables(evaluation criteria variables) statistically in selecting their MATs. Therefore, we believed that expert group's members have achieved sufficient agreement to permit the use of geometric mean to average the group's preference without obscuring the differences of individual opinions.

• Journal of the Korean Society of Physical Medicine
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2021

PURPOSE: The purpose of this study is to conduct inter-rater and intra-rater reliability tests in patients with low back pain (LBP) using the prone instability test (PIT) and side-lying instability test (SIT). We have analyzed the Korean version Oswestry disability index (K-ODI) correlations and radiograph finding (RF) for validity. METHODS: Individuals (n = 51) (mean age of 40.27 ± 13.28) with LBP for at least over a week were recruited, together with two participating physical therapist examiners. The measurement consisted of PIT, PST, K-ODI, and RF. Sensitivity (Sn), specificity (Sp), positive predictive value, negative predictive value, prevalence index, agreement %, Cohen's kappa, and prevalence-adjusted bias-adjusted kappa (PABAK) were calculated. The PIT and SIT were compared with RF for validity analysis, while PIT, SIT, K-ODI, and RF were calculated for the correlation analysis. RESULTS: The intra-rater reliability test measured for the PIT (kappa = .79, PABAK = .88) and SIT (kappa = .73, PABAK = .84), and inter-rater reliability test measured for the SIT (kappa = .80, PABAK = .88) showed good agreements. The PIT (Sn = .65, Sp = .63) and SIT validities (Sn = .68, Sp = .70) were compared with RF, showing a significant correlation in PIT and RF (r = .69), SIT and RF (r = .73), and PIT and K-ODI (r = .53). CONCLUSION: The SIT is a more comfortable position test than the PIT in patients. Both PIT and SIT have acceptable reliability and validity.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.28-33
• /
• 2004

An in-line fiber coupler, based on side-polished single-mode fibers covered with an intermediate coupling layer and a planar waveguide, is analyzed by modeling the interaction region as an equivalent multi-layered planar waveguide. The reflectance for the multi-layered structure with and without buffer layer is illustrated as a function of the refractive index and thickness of the overlay waveguides. When the refractive index of the overlay waveguides is greater than that of the fiber core, the conditions for the intermediate coupling layer to increase the power coupling from the fiber to the overlays is also explained. Through the experimental results using a LiNbO$_3$planar waveguide, we show that the theoretical analysis is reasonable and in good agreement with the measured values.

• Journal of radiological science and technology
• /
• v.46 no.3
• /
• pp.231-238
• /
• 2023

This study aimed to compare the results of delivery quality assurance (DQA) using MapCHECK and OCTAVIUS for radiation therapy. Thirty patients who passed the DQA results were retrospectively included in this study. The point dose difference (DD) and gamma passing rate (GPR) were analyzed to evaluate the agreement between the measured and planned data for all cases, Plan complexity was evaluated to analyze dosimetric accuracy by quantifying the degree of modulation according to each plan. We analyzed the monitor units (MUs) and total MUs for each plan to evaluate the correlation between the MUs and plan complexity. We used a paired t-test to compare the DD and GPRs that were obtained using the two devices. The DDs and GPRs were within the tolerance range for all cases. The average GPRs difference between the two devices was statistically significant for the brain, and head and neck for gamma criteria of 3%/3 mm and 2%/2 mm. There was no significant correlation between the modulation index and total MUs for any of the cases. These DQA devices can be used interchangeably for routine patient-specific QA in radiation therapy.

• Korean Journal of Optics and Photonics
• /
• v.4 no.3
• /
• pp.323-329
• /
• 1993

In this paper, dependence of the diffraction efficiency upon incident light intensity is studied. The conductivity ratio, which is dependent upon the incident light intensity, changes the static electric field in a crystal. This change of the static electric field modulates the refractive index via linear electro-optic effect. And the change of the refractive index affects the diffraction efficiency. It is found that experimental results with $Fe:LiNbO_3$ crystals are in good agreement with the theory.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.3
• /
• pp.158-164
• /
• 1998

We introduce a statistical scheme to classify seabed from acoustic profiling data acquired using Chirp sonar system. The classification is based on grouping of signal traces by similarity index, which is computed using the K-L (Karhunen-Lo$\grave{e}$ve) transform of the Chirp profiling data. The similarity index represents the degree of coherence of bottom-reflected signals in consecutive traces, hence indicating the acoustic roughness of the seabed. The results of this study show that similarity index is a function of homogeneity, grain size of sediments and bottom hardness. The similarity index ranges from 0 to 1 for various types of seabed material. It increases in accordance with the homogeneity and softness of bottom sediments, whereas it is inversely proportional to the grain size of sediments. As a real data example, we classified the seabed off Cheju Island, Korea based on the similarity index and compared the result with side-scan sonar data and sediment samples. The comparison shows that the classification of seabed by the similarity index is in good agreement with the real sedimentary facies and can delineate acoustic response of the seabed in more detail. Therefore, this study presents an effective method for geoacoustic modeling to classify the seafloor directly from acoustic data.