• Journal of the Korea Convergence Society
• /
• v.4 no.1
• /
• pp.33-41
• /
• 2013

This paper presents an adaptive recursive least squares algorithm (ARLS) for detecting voltage sag and voltage swell events in power systems. Different methods have been developed to detect voltage sag and voltage swell. Some of them use window techniques, which are too slow when voltage sag or swell mitigation is required. Others depend on the extraction of a single non-stationary sinusoidal signal out of a given multi-components input signal, and therefore they don't consider the harmonic components in calculating the voltage root mean square value (rms). The method, proposed in this paper, is capable of estimating the voltage rms taking into account all harmonic components. The method is tested by applying it to different, simulated signals using ATP program, and compared with voltage sag detection algorithms.

• Korean Journal of Hydrosciences
• /
• v.8
• /
• pp.97-110
• /
• 1997

Quantifying water balance components is crucial to understanding the basic hydrology and hydrochemistry. An importance of water balace studies has been emphasized from the need to grasp the actual condition of water resources and environmental changes including climatic changes. This paper proposes a method for evaluating water balance components based on the vegetation monitor using remote sensing data. Here, the evapotranspiration model adopts a direct method by using NDVI(Normalized Difference Vegetation Index) calculated from NOAA/AVHRR data and a detailed descriptionof water balance by using the evapotranspiration over the Korean Peninsula. In the study, areal distribution data sets of water balance components are produced using NDVI and a simplified water balance model. This method enables one to discuss the hydrological problems for North Korea where insufficient meteorological and hydrological data exist. The results obtained indicate the specific regional features on water inventory and fluctuation in water balance.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2408-2410
• /
• 1999

The ageing process was checked by leakage current monitoring in Inclined-Plane Method. In order to monitor leakage current, DAS with 12-bit, 8-channel A/D converter was prepared. The monitored components of leakage current were averages of the rms and peak, max peak, cumulative charge, and the number of peaks in the ranges of 1-10, 10-20, 20-30, 30-40, 40-50, >50 mA. And, erosion depth was measured to be used as the index of the ageing. So, the results of leakage current components and erosion depth measurement were compared to find one or more components of which trends of changes were similar to that of erosion.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.4
• /
• pp.359-365
• /
• 2014

A study was conducted to investigate the possible effects of fatigue which was resulted from increased running time on the stability during a prolonged run. The purposes of this study were twofold: first, to determine the discrete and non-linear variability of GRF (ground reaction force) components between running times to know the body stability, and second, to determine the pattern between discrete and non-linear variability. Nineteens healthy young adult males served in this study as subjects who ran at their preferred running speed. GRF data for twenty strides were collected at 5, 65, and 125 minutes during run. Variance coefficient and Lyapunov Exponent techniques on the GRF data were used to calculate variability index for each of the running time conditions. There were no difference between discrete variabilities of three components of GRF, but non-linear variability of the Fz component of GRF was decreased by increasing running time (p<.01). No relationship was found between discrete and non-linear variability.

• Health Policy and Management
• /
• v.29 no.1
• /
• pp.90-97
• /
• 2019

This study investigated the healthcare status of South Korea and member states of the Organization for Economic Cooperation and Development (OECD). By employing the position value for relative comparison index, healthcare status was measured through the following components: demand, supply, accessibility, quality, and cost. Statistical analysis was conducted through the Mann-Kendall test from analyzing trends from 2000 onwards. Results showed that while Korea, on average, scores higher than the OECD average in most of the investigated components, it is below average in certain indexes including primary care and mental health care. Considering the various health issues that have been raised about these indexes, it is important these components be improved upon by policy-makers.

• Steel and Composite Structures
• /
• v.20 no.4
• /
• pp.913-930
• /
• 2016

It is common practice to use Reduced Web Beam Sections (RWBS) in steel moment resisting frames. Perforation of beam web in these members may cause stress and strain concentration around the opening area and facilitate ductile fracture under cyclic loading. This paper presents a numerical study on the cyclic fracture of these structural components. The considered connections are configured as T-shaped assemblies with beams of elongated circular perforations. The failure of specimens under Ultra Low Cycle Fatigue (ULCF) condition is simulated using Cyclic Void Growth Model (CVGM) which is a micromechanics based fracture model. In each model, CVGM fracture index is calculated based on the stress and strain time histories and then models with different opening configurations are compared based on the calculated fracture index. In addition to the global models, sub-models with refined mesh are used to evaluate fracture index around the beam to column weldment. Modeling techniques are validated using data from previous experiments. Results show that as the perforation size increases, opening corners experience greater fracture index. This is while as the opening size increases the maximum observed fracture index at the connection welds decreases. However, the initiation of fracture at connection welds occurs at lower drift angles compared to opening corners. Finally, a probabilistic framework is applied to CVGM in order to account for the uncertainties existing in the prediction of ductile fracture and results are discussed.

• Journal of Korean Medicine for Obesity Research
• /
• v.10 no.1
• /
• pp.17-28
• /
• 2010

Objectives It is significant to determine the validation of a self-administered somatotype drawing for the simple assessment of childhood obesity in elementary school and clinical practice. Methods The subjects were 202 children(112 boys and 90 girls) who answered a questionnaire for somatotype drawing and weremeasured for body components with bioelectrical impedance. The somatotype drawing of children was analysed according to the three criteria of childhood obesity - BMI percentile, obesity index and percent body fat, respectively. Results BMI, waist-hip ratio, skeletal musclemass and proteinmass had significant differences(p<.05) between boys and girls. Somatotype drawing had the highest correlation with BMI in both boys and girls, and also showed a high correlation with BMI percentile, obesity index and percent body fat.According to these criteria of childhood obesity, the somatotype drawing was the best consistent with the obesity index, next turn was the percent body fat and then the BMI percentile. Conclusions The validation of somatotype drawing for the assessment of childhood obesity was analysed according to BMI percentile, obesity index and percent body fat, and the somatotype drawing was the best consistent with obesity index in both boys and girls.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.5
• /
• pp.380-389
• /
• 2011

Esthetic appeal of a product is often affected by the appearance quality of seams forming between components of the product. The appearance quality of seams is, however, assessed in a very subjective and qualitative manner that heavily depends on the evaluator. This paper presents a preliminary study to quantify such assessment by formulating a quantitative index which is a linear function of the seam gap sizes, seam gap ranges, and the size uniformity of seam gaps. By considering a highly simplified problem of a drawer system and utilizing subjective assessments by twenty evaluators, the index has been formulated. The validity of this index has been confirmed by observing its behavior with changes of the component tolerances. Also, the utility of this index has been demonstrated through a selective assembly scheme applied to the drawer system problem. Though the index formulated in this study for seam appearance quality may be useful, future studies are necessary to make the model readily applicable to real problems.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.5
• /
• pp.345-351
• /
• 2015

Sounds of electrically powered vehicle components such as window lift system, roller blind, etc., are required to be more comfortable and not to irritate the people emotionally. In this paper, a study was conducted to identify the significant sound quality metric and compose the luxuriousness sound quality index of electrically powered vehicle roller blind which is part of vehicle sunroof system. Before conducting subjective evaluation, sound characteristics of roller blind was analyzed and set the target operating sound for subjective evaluation. Thus, transfer sound of roller blind which has the characteristics of sound modulation was used for subjective evaluation. Multiple linear regression analysis was carried out by chosen Zwicker's metrics which are pointed by comments of jurors. Loudness and sharpness related metrics are prime metrics in luxuriousness sound quality index we composed. Also, effect of roller blind assay when it is attached to real vehicle was identified to evaluate the validity of index.

• Structural Engineering and Mechanics
• /
• v.54 no.2
• /
• pp.337-362
• /
• 2015

This paper presents a feasibility study on structural damage alarming and localization of long-span cable-supported bridges using multi-novelty indices formulated by monitoring-derived modal parameters. The proposed method which requires neither structural model nor damage model is applicable to structures of arbitrary complexity. With the intention to enhance the tolerance to measurement noise/uncertainty and the sensitivity to structural damage, an improved novelty index is formulated in terms of auto-associative neural networks (ANNs) where the output vector is designated to differ from the input vector while the training of the ANNs needs only the measured modal properties of the intact structure under in-service conditions. After validating the enhanced capability of the improved novelty index for structural damage alarming over the commonly configured novelty index, the performance of the improved novelty index for damage occurrence detection of large-scale bridges is examined through numerical simulation studies of the suspension Tsing Ma Bridge (TMB) and the cable-stayed Ting Kau Bridge (TKB) incurred with different types of structural damage. Then the improved novelty index is extended to formulate multi-novelty indices in terms of the measured modal frequencies and incomplete modeshape components for damage region identification. The capability of the formulated multi-novelty indices for damage region identification is also examined through numerical simulations of the TMB and TKB.