• 한국전산유체공학회지
• /
• 제20권1호
• /
• pp.1-9
• /
• 2015

A developed code is applied to simulate relative motion of floating bodies in a side-by-side arrangement, including effects of a fender and a hawser. The developed code is based on the flux-difference splitting scheme for immiscible incompressible fluids and the hybrid Cartesian/immersed boundary method. To validate the developed code for free surface flows around deforming boundaries, the water wave generation is simulated, which is caused by bed movement. The computed wave profile and time histories of wave elevation are compared with other experimental and computational results. The effects of a fender and a hawser are modeled by asymmetric force acting on the floating bodies according to a relative displacement with the bounds, in which the fender and the hawser exert no force on the bodies. It has been observed that the floating body can be accelerated by a gap flow due to a phase difference caused by the free surface. Grid independency is established for the computed time history of the body velocity, based on three different size grids.

• 한국안전학회지
• /
• 제12권4호
• /
• pp.161-168
• /
• 1997

Most plants producing semiconductors use a lot of chemicals, hazardous materials, and explosive gases. Though those materials are hazardous too much, some works still have to be done manually by human workers. However, according to a historical survey, more than half industrial accidents of those plants resulted from human errors or malfunctions. Thus, this research aimed 1) to diagnose shifting hazardous materials of semiconductor plants, 2) to estimate failure probability of human workers through human reliability analysis, and 3) to find out the tasks on which educational emphasis should be put. Through personal interview and visiting working spots, shifting tasks were analyzed, and modelled into a 24-step work, and after that, THERP and ETA was applied. During the shifting work, estimated human failure probability under the assumption of independency, 2.3004E-05, underestimated that probability 8. l008E-05 which could be calculated under the assumption of dependency. And this analysis showed that gas leakage from an old cylinder occupies 78.27% in the case of independent failures whereas gas leakage from a new cylinder occupies 75.06% in the case of dependent failures. So it was concluded that dependency assumption may gloss real situations. In addition, confirming gauge of regulators and closing valves turned out to be the most important tasks than purge tasks.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권8호
• /
• pp.1135-1144
• /
• 2010

유무선 통신기술이 접목된 정보통신 및 제어기술을 이용하는 첨단해양교통시설은 안전한 해양교통환경을 보장할 수 있는 혁신적인 해양교통시설이다. 표준화를 기반으로 개발되어진 기술들을 통합한 해양교통시설은 항로표지 시스템의 관리와 원격 모니터링 분야에 그 응용기반이 확대되어져 가고 있다. 이러한 해양교통시설의 환경적 변화를 고려하여 시스템 독립성, 유연성, 확장성 등을 제공하는 해양교통시설 통합관리 시스템에서의 미들웨어 개념을 정의하고, 미들웨어에 적용 가능한 기술들을 조사하였으며 이를 바탕으로 하여 소프트웨어 구조와 인터페이스를 구성하고 그 구현 방안을 연구하였다.

• 한국경영과학회지
• /
• 제37권2호
• /
• pp.73-88
• /
• 2012

Even though the final source selection of foreign weapon system purchase project in defense area is the most important phase, the standard evaluation index has not been developed. This paper provides an appropriate evaluation index using DEMATEL and ANP methods. First, the all possible evaluation criteria applied to the relevant previous literatures in domestic and overseas researches are derived and classified into groups. Second, DEMATEL method is used to determine the network structure representing the relations of cause and effect between groups and their sub-criteria. If isolated factors, not connected with other factors, are existed in the network structure, all factors except for the isolated ones are grouped as one large factor so that the independency between those ones is maintained. The weights of criteria are determined using AHP method if the criteria are independent relation and ANP method if the criteria are networked. The weights of higher and lower level criteria are then integrated and distributed as a point with respect to the decision making purpose. The developed evaluation index can be used as a standard one in various foreign weapon system purchase projects in defense area.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.618-622
• /
• 2009

An improvement of standard encoder has been saturated recently. However, new coding method does not have a compatibility with conventional standard. To solve this problem, new concept coding method that has a semicompatibility with standard may be discussed. On the other hand, cyclic Intra-picture coding is used for access and refreshment. However, I-picture spend large amount of bits. An enhancement of I-picture is desired with keeping its refreshment performance. Further, it's a problem that quality change at the border of GOP because of its independency. To respond these, we propose the coding which is applied an inter-frame processing at the border of GOP. Applied method is the reduction of quantization error using the motion compensated inter-picture processing. In this report, we check the improvement of the efficiency and the compatibility of proposed method. As a result of examination, we recognize that the total gain is maximally 1.2dB in PSNR. Generally, the degradation of performance in standard decoding is smaller than its gain. Also the refreshment performance is tested.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권9호
• /
• pp.376-383
• /
• 2006

In this paper, autonomous information exchange methodology is studied between IEDs using SOAP protocol based on XML and PtP communication to archive the safety and reliability of large-scale system operation. The SOAP protocol has the advantages in the independency Problem for operating systems, using language, platforms and the security problem because it is XML-based RPC protocol. Inference-based solution of the IED is designed as rule-based solution so that the IED internal status, the system status or the faulted zone can be inferred autonomously using the internal data as well as information data obtained from free information exchange among other IEDS, Also, it is designed so that the inference results and the operation information are transmitted to the above SCADA system, and determined autonomously whether the commands from the SCADA are executed or not. Finally, The inference-based solution of IED and information exchange system among IEDS is implemented using MS Visual C++ MFC, MS SOAP and MS XML. Availability and accuracy of the proposed methodology and the design is verified from diversity simulation reviews for typical distribution substation.

• 한국통신학회논문지
• /
• 제33권9C호
• /
• pp.676-682
• /
• 2008

정보화시대에 진입하면서 디지털 콘텐츠 활용기술이 사회 각 분야에서 각광을 받고 있으며 이와 더불어 효율적인 콘텐츠 관리와 콘텐츠 저작권보호를 위한 관련 기술연구가 활발하게 이루어지고 있다. 그러나 기존 저작권보호를 위한 DRM기술은 단일 CMS 도메인을 기반으로 개발되고 콘텐츠 클로벌 활용이 제한되어 정보의 교류와 공유를 효율적으로 지원하지 못하는 단점이 있다. 이 논문에서는 CMS간 콘텐츠 상호운영이 가능한 계층적 통합 메타데이터를 기반으로 콘텐츠 저작권보호를 위한 DRM모델을 제안한다. 제안 모델은 동종 및 이종 CMS간 콘텐트들이 상호유통이 가능하고 또한 유통과정에서 발생되는 저작권문제를 해결하였다.

• 한국의류학회지
• /
• 제40권4호
• /
• pp.650-659
• /
• 2016

This study is to comprehend indie fashion which pursues the realization of self-identity, values, freedom and a creation that deviates from conventional cultural flow. This study also aims to understand the definition and characteristics of indie fashion in Korean culture. A rigorous study on indie fashion has not yet been done; therefore, this study was conducted through both a literature study and empirical study. The empirical study asked individuals who engage in indie fashion to provide opinions on the definition and characteristics of indie fashion. The results are as follow. First, indie fashion does not impose conformity upon an individual nor does it pursue differentiation. Second, indie fashion based on self-identity is characterized by an individual's consistent and unchanging style. Third, images (or styles of indie fashion) cannot be uniformly defined as styles different from one individual to another. Fourth, indie fashion can be defined as when an individual perceives themselves as pursuing indie spirit and its attitude. Next was an empirical study that showed in what position indie fashion is and who the fashion leader is in indie fashion. People who enjoy indie fashion said that (regarding indie fashion) it exists independent from the flow of trends as it regards personal values and identity as important.

• International Journal of Aeronautical and Space Sciences
• /
• 제6권1호
• /
• pp.52-60
• /
• 2005

The CFD coupled aeroelastic analyses have significant advantages over linear panel methods in their accuracy and usefulness for the simulation of actual aeroelastic motion after specific initial disturbance. However, in spite of their advantages, a heavy computation time is required. In this paper, a method is discussed to save a computational cost in the time domain aeroelastic analysis based on the system identification technique. The coefficients of system identification model are fit to the computed time response obtained from a previously developed aeroelastic analysis code. Because the non-dimensionalized data is only used to construct the model structure, the resulting model of the unsteady CFD solution is independent of dynamic pressure and this independency makes it possible to find the flutter dynamic pressure without the unsteady aerodynamic computation. To confirm the accuracy of the system identification methodology, the system model responses are compared with those of the CFD coupled aeroelastic analysis at the same dynamic pressure.

• Structural Engineering and Mechanics
• /
• 제58권5호
• /
• pp.799-823
• /
• 2016

A finite element model for the non-linear dynamic analysis of a reinforced concrete (RC) containment shell of a nuclear power plant subjected to extreme loads such as impact and earthquake is presented in this work. The impact is modeled by using an uncoupled approach in which a load function is applied at the impact zone. The earthquake load is modeled by prescribing ground accelerations at the base of the structure. The nuclear containment is discretized spatially by using 20-node brick finite elements. The concrete in compression is modeled by using a modified $Dr{\ddot{u}}cker$-Prager elasto-plastic constitutive law where strain rate effects are considered. Cracking of concrete is modeled by using a smeared cracking approach where the tension-stiffening effect is included via a strain-softening rule. A model based on fracture mechanics, using the concept of constant fracture energy release, is used to relate the strain softening effect to the element size in order to guaranty mesh independency in the numerical prediction. The reinforcing bars are represented by incorporated membrane elements with a von Mises elasto-plastic law. Two benchmarks are used to verify the numerical implementation of the present model. Results are presented graphically in terms of displacement histories and cracking patterns. Finally, the influence of the shear transfer model used for cracked concrete as well as the effect due to a base slab incorporation in the numerical modeling are analyzed.