• 제목/요약/키워드: Increased Safety

검색결과 5,185건 처리시간 0.034초

염수 환경 열화 상태를 모의한 절연애자의 자외선 코로나 특성 분석 (Analysis of Properties of UV Corona on Insulator in Salt Water Environments)

  • 김영석;최명일;김종민;방선배;송길목;이명준;이우창
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.1590-1591
    • /
    • 2011
  • In this paper, the UV corona camera was developed using the solar blind and Multi Channel Plate(MCP) technology for the target localization of UV camera. UV camera developed a $6.4^{\circ}{\times}4.8^{\circ}$ of the field of view as a conventional camera to diagnose a wide range of slightly enlarged, and power equipment to measure the distance between the camera and the distance meter has been attached. The UV camera was developed and measured using a UV image, as applied voltage increased ultraviolet images of the phenomenon could be obtained. And we investigated properties of UV corona image on insulator in salt water environments. From the results, the breakdown voltage was decreased and UV images were taken at low voltages and the UV image is rapidly increased with increasing High voltage.

  • PDF

시스템 개념설계 단계에서 안전도 향상을 위한 시스템공학 및 시스템안전 프로세스의 통합에 관한 연구 (A Study on the Integration of Systems Engineering Process and Systems Safety Process in the Conceptual Design Stage to Improve Systems Safety)

  • 김영민;이재천
    • 대한안전경영과학회지
    • /
    • 제14권3호
    • /
    • pp.1-10
    • /
    • 2012
  • Recently, we have witnessed the definitely negative impacts of large-scale accidents happened in such areas as atomic power plants and high-speed train systems, which result in increased fear for the potential danger. The problems appear to arise due to the deficiency in the design of large-scale complex systems. One of the causes can be attributed to the design process that does not fully reflect the safety requirements in the early stage of the system development because of the substantially increased complexity. In this paper, to enhance the systems safety an integrated process is studied, which considers simultaneously both the system design process and system safety process from the beginning of the system development. In the conceptual system design phase an integrated process model is constructed by analyzing the activities of both the system design and safety processes. As a case study example, an inner city train system is described with the application of the developed process. The computer simulation of the example case is followed by the result discussed. The results obtained in the paper are expected to be the basis for the future study where a detailed process and its associated activities can be developed.

세퍼드에서 ethylene glycol 독성에 관한 연구 (Ethylene glycol intoxication in German shepherd dogs)

  • 박현종;이오형;임채웅
    • 한국동물위생학회지
    • /
    • 제28권1호
    • /
    • pp.23-30
    • /
    • 2005
  • Ethylene glycol (EG) intoxication in dogs can pose a diagnostic challenge. We investigated the effect of a lethal dose of EG to the Shepherd on blood, urine test, and histopathologic observation. Shepherds were treated orally with EG at $10\;m{\ell}/kg$ body weight. Clinically, EG caused the vomition, depression of central brain. Anion gap was increased, which was decreased pH of blood, The blood osmorality was increased at 3 hours, and BUN and creatinine was increased at 24 hour significantly. The pH of urine decreased. The crystal of calcium oxalate appeared at 6 hours. The amount of crystals increased at 12 and 24 hours. Microscopically, the degeneration of proximal tubules were shown at 1 hour and finally progressed as acute tubular nephrosis at 24 hours. These results suggest that the blood and urine test accompanied with histopathological examination be helpful to investigate the EG intoxication.

곡선부 통과 차량의 진동특성 및 안전성 평가 (A Safety Assessment and Vibration Characteristics of Railway Vehicle Passing Curves)

  • 박광수;이승일;이희성
    • 한국소음진동공학회논문집
    • /
    • 제17권10호
    • /
    • pp.993-1001
    • /
    • 2007
  • An analysis model has been developed to assess running safety of railway vehicle passing curves. By using ADAMS/Rail, a computer analysis has been conducted by changing various parameters according to the track conditions. Analysis results show as follows: A derailment coefficient of left wheel was increased according to increase of cant at low speed, while it was decreased as increase of cant at high speed. A unload rate of left wheel was also increased according to increase of cant at low speed, while it was decreased as increase of cant at high speed. A wear number of left wheel was increased according to increase of cant at all speed, but only at 35 m/s, it was decreased as increase of cant. A friction coefficient of left wheel was Increased according to increase of cant at all speed, but only at 35 m/s. it was decreased as increase of cant.

$\cdot$소규모 건설현장의 안전교육 효율화 방안

  • 김동하;임현교
    • 한국산업안전학회:학술대회논문집
    • /
    • 한국안전학회 1998년도 춘계 학술논문발표회 논문집
    • /
    • pp.207-214
    • /
    • 1998
  • In the past several years, accident frequency rate was decreased but severity rate was increased at construction sites with less than two-hundred workers. Accidents caused by failure of education in respect with the management occupied about 40 % in 1997. In this research, a questionnaire survey to know the effects of safety education was committed for small & medium construction sites. Survey results showed that workers wanted to improve work environments and safety facilities than safety education, however they also were not satisfied to educational facilities, contents and methods. Whereas, they agreed that they improved safety consciousness after safety education. As a result, four appropriate methods to promote effective safety education were proposed.

  • PDF

염수에 의해 열화된 절연커버 및 옥외용 가교폴리에틸렌 절연전선의 표면구조변화 (A Change of Surface Structure with Insulation Cover and Outdoor Cross-linked Polyethylene Insulated Wire Degraded by Salt Water)

  • 최충석;길형준;김향곤;한운기
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 C
    • /
    • pp.1897-1899
    • /
    • 2004
  • In this paper, in order to analyze the characteristics of degradation by salt water with insulation cover and OC wire(outdoor cross-linked polyethylene insulated wire) used in power receiving system, an experimental apparatus has been designed and fabricated. An insulation cover and OC wire were installed in an experimental apparatus, and degraded in each case of 2%, 5%, 10% salinity during 12 weeks. An optical microscope was used to observe a changing process of sample surface, and an electrical safety was analyzed by measuring dielectric breakdown voltages of samples. As salinity increased, so ununiformity of sample surface increased. The breakdown wasn't produced to 50kV about samples regardless of salinity, testing period.

  • PDF

Current use of safety restraint systems and front seats in Korean children based on the 2008-2015 Korea National Health and Nutrition Examination Survey

  • Kong, Seom Gim
    • Clinical and Experimental Pediatrics
    • /
    • 제61권12호
    • /
    • pp.381-386
    • /
    • 2018
  • Purpose: The use of proper safety restraint systems by children is vital for the reduction of traffic accident-related injury and death. This study evaluated the rates of use of safety restraint systems and front seats by Korean children. Methods: Based on data from the National Health and Nutrition Examination Survey from 2008 to 2015, I investigated the frequencies of safety restraint systems and front seat use by children under six and 12 years of age, respectively. Results: The percentage of respondents who said they always use safety restraint systems increased from 17.7% in 2008 to 45.0% in 2015. The rate of children who did not use the front seats at all was 47.3 % in 2008 compared to 33.4% in 2015. Multivariate logistic regression analysis showed a decrease in safety-restraint-system use as age increased (odds ratio, 0.63; 95% confidence interval [CI], 0.51-0.77). The use rate of front-passenger seat belts by the mother is significantly correlated with the safety-restraint-system use rate by children (odds ratio, 2.14; 95% CI, 1.12-4.06). Conclusion: Although the rate of safety-restraint-system use for children is increasing annually, it remains low. Additionally, the use rate of front passenger seats for children is high. To reduce the rates of injury and death of children from traffic accidents, it is necessary to educate on the appropriate use of safety restraint systems according to age and body size and to develop stronger regulations.

지상형 탄약고 폭발 시 안전거리 위반율에 따른 위험노출대상의 피해 수준 분석 연구 (Expected Damage Analysis of Risk Exposure Object by Violation Rate of Safety Distance in Explosion of Ground Type Magazine)

  • 함태윤;이재준
    • 한국안전학회지
    • /
    • 제37권4호
    • /
    • pp.92-100
    • /
    • 2022
  • Of the Korean military's 3,959 ammunition depots, 1,007 - more than 25% - violate safety requirements for distance and equipment. There is a risk of explosion in old depots that are vulnerable to various interior and exterior accidents. This paper examines 10 scenarios, with varying values for ammunition amount and safety distance. The study calculated the overpressure that can be applied to risk-exposure objects, based on the safety distance; expected damage was predicted using constructed spatial information from 3D explosion simulations. The simulations confirmed that explosion overpressure increased the most when the safety distance violation rate increased from 80% to 90%. It also confirmed that secondary damage such as fire and explosion can cause casualties and property damage when the violation rate is 60% or higher. The results show that building collapse becomes a risk with a violation rate of 70% or higher. We conclude that taking ammunition depot safety distance violation into account when planning military facilities and their land utilization could better protect life and property.

지진계수를 고려한 제방의 사면안정에 관한 연구 (A Study on the Slope Stability of Embankment in Consideration of Seismic Coefficient)

  • 강우묵;지인택;이달원
    • 한국농공학회지
    • /
    • 제33권4호
    • /
    • pp.105-120
    • /
    • 1991
  • This study was performed to investigate the minimum safety factor of embankment in consideration of seismic coefficient by the psuedo-static analysis The variables were cohesion, the internal friction angle, angle of slope, height of seepage, height of embankment, depth of replacement The results obtained were compared with those by Fellenius method, simplified Bishop method and Janbu method. The results were summarized as follows: 1.The increasing rate of the minimum safety factor with the increasing of cohesion appeared larger in Fellenius method and Bishop method than in Janbu method. And that with the increasing of the internal friction angle appeared the lowest value in Janbu method. The minimum safety factor was influenced larger on the internal friction angle than on cohesion. 2.The variation of the minimum safety factor with the height of seepage at 0m and 5 m was nearly similar to Fellenius method, Bishop method and Janbu method. On the other hand, it was decreased suddenly at 25 m. 3.The minimum safety factor with the height of embankment was decreased remarkably under 10 m with the increasing of seismic coefficient. But, it was decreased slowly more than 10 m. As the height of embankment was low, the influence of cohesion appeared larger. 4.In heigher case of the depth of replacement, the phenomenon of reduction of the minimum safety factor appeared remarkably with seismic coefficient increased. And in lower case of the depth of replacement, the minimum safety factor was similar in Fellenius method and Bishop mehtod. But it appeared larger in Bishop method and Janbu method than in Fellenius method with the depth of replacement increased. 5.As the cohesion and the internal friction angle were large, the phenomenon of reduction of the minimum safety factor with the increasing of seismic coefficient appeared remarkably. Also, the influence of seismic coefficient in minimum safety factor appeared larger with the soil parameter increased. 6.When the seismic coefficient was considerated, investigation of the structural body on the slope stability appeared profitably in Fellenius method and Janbu method than in Bishop method.

  • PDF

평판형 고체산화물 연료전지 표면균열거동에 관한 수치해석 (The Numerical Analysis for the Surface Crack Behavior in the Planar Solid Oxide Fuel Cell)

  • 박철준;권오헌;강지웅
    • 한국안전학회지
    • /
    • 제33권5호
    • /
    • pp.1-8
    • /
    • 2018
  • A fuel cell is an energy conversion device that converts a chemical energy directly into an electrical energy and has higher energy efficiency than an internal combustion engine, but solid oxide fuel cell (SOFC) consisting of brittle ceramic material remains as a major issue regarding the mechanical properties as the crack formation and propagation. In this study, the stress distribution and crack behavior around the crack tip were evaluated, due to investigated the effects of the surface crack at the operating condition of high temperature. As a result, the difference of the generated stress was insignificant at operating conditions of high temperature according to the surface crack length changes. This is because, the high stiffness interconnect has a closed structure to suppress cell deformation about thermal expansion. The stress intensity factor ratio $K_{II}/K_I$ increased as the crack depth increased, at that time the effect of $K_{II}$ is larger than that of $K_I$. Also the maximum stress intensity factor increased as the crack depth increased, but the location of crack was generated at the electrolyte/anode interface, not at the crack tip.