• 제목/요약/키워드: Incombustible material

검색결과 14건 처리시간 0.025초

고성능 진공단열재의 건축적인 적용에 관한 연구 (Research on the Architectural Applications of High-Performance Vacuum Insulation Panel)

  • 권영철;김석
    • 토지주택연구
    • /
    • 제10권3호
    • /
    • pp.23-32
    • /
    • 2019
  • 현존하는 단열재 중 가장 열전도율이 낮은 진공단열재(VIP; Vacuum Insulation Panel)는 특수한 재질의 외피재(Envelope)와 외피재 내부의 심재(Core Material), 그리고 단열재 내부의 공기를 흡착하는 흡착제(Getter)로 구성되어 있고, 단열성능을 극대화하기 위해 내부를 진공처리한 제품이다. 진공단열재의 외피재는 알루미늄 박막 필름이 주로 사용되며, 진공단열재의 수명 및 신뢰성을 결정하는 중요한 소재이다. 본 연구를 통하여 불연성이 확보된 Fiber Glass 심재 진공단열재의 방화성능 및 단열성능 확인과 함께 건축적인 적용가능성을 검토하였으며 그 내용을 정리하면 다음과 같다. 1) 20mm 두께의 Fiber Glass 심재 진공단열재의 열전도율이 0.00177W/m·K로, 두께 20mm로 지역별, 부위별 강화된 단열기준을 모두 충족할 수 있음을 알 수 있었다. 2) 진공단열재에 대한 불연성능시험과 가스유해성시험 결과, 불연재료로 적합한 것으로 나타났다. 3) 불연 진공단열재의 장기내구성 시험결과, 25년이 지나더라도 스치로폼 및 유리섬유에 비해 10배 이상의 단열성능을 유지할 수 있음을 알 수 있었다. 4) 건물의 외벽 열관류율 0.12W/㎡K 이하를 만족하기 위해, 준불연성능이 확보된 단열재인 "가"등급의 비드법 보온판 2종 4호와 페놀폼을 사용한다면 각각 280mm, 170mm 이상을 써야하지만, 불연 진공단열재는 20mm 두께로 동일 단열기준을 만족할 수 있는 것으로 나타났다.5) 고성능 진공단열재는 열관류율 0.12W/㎡K 이하를 기준으로 가격경쟁력이 페놀폼 대비 약 1,500원/㎡ 뛰어난 것으로 나타났다.

칼라 부직포의 연소실험에 관한 연구 (A Study on Combustion Experiments of Color Nonwoven)

  • 민세홍;임상범
    • 한국화재소방학회논문지
    • /
    • 제25권3호
    • /
    • pp.99-106
    • /
    • 2011
  • 본 연구에서는 공사현장에서 사용하고 있는 칼라 부직포의 화재위험성을 평가하기 위하여 콘칼로미터와 수직화염전파성 실험을 실시하였다. 그 결과 칼라 부직포는 표변에 화염이 착화가 되는 것이 아니라 용융이 된 상태에서 가연성가스가 발생되어 착화되는 연소형태를 보였다. 수직화염전파성 실험의 경우 가열강도에 의해 칼라 부직포가 수축 및 파단되어 화염이 전파되지 않을 정도로 열에 매우 취약하였다. 총방출열량은 2.66 MJ/$m^2$로, 건축물 실내마감재료 난연성능평가의 준불연재료(10분), 난연재료(5분) 8 MJ/$m^2$ 이하 기준에 규합되지만 이것은 내장재의 기준으로 칼라 부직포가 난연성능을 가지고 판단할 수 없으며 외장재에 대한 난연성능과 실험방법에 대한 기준이 마련되어야 한다고 판단된다.

화재 위험성이 높은 노출배관 사용에 관한 연구 (Study on Exposed Piping with High Risk of Fire)

  • 김엽래;백동현
    • 한국화재소방학회논문지
    • /
    • 제29권4호
    • /
    • pp.61-66
    • /
    • 2015
  • 건축물 내에 노출배관의 자재에 대한 별도의 규정을 두지 않음에 따라 내부식성, 내약품성 측면에서 우수하다고 알려진 Poly Vinyl Chloride (PVC)관을 많이 사용하고 있다. 그러나 화재시 유독가스의 발생과 화재의 확산 방지에 취약하다는 우려의 시각이 있다. 노출배관은 불연재를 사용하여야 화재시 유독가스의 확산을 방지하면서 인명이나 재산상의 피해를 최소화할 수 있다. 초대형 건축물이 많이 건설되고 있는 시기에 화재시 피해의 심각성이 매우 우려된다. 건축물의 화재안전기준을 강화하고, 높아진 안전의식을 수용하여야 선진국으로의 진입에 한걸음 더 나아갈 수 있다. 노출배관에 사용되는 자재를 조사하고, 선진국의 기준에 대해 분석하여 효율성을 연구함으로서 국민안전을 증대시킬 수 있다. 국내 각 지역별 건축물의 노출배관에 대해 현장의 실태를 조사하여 대안을 모색하고자 한다. 건축물 안전과 거주자의 안전 확보 및 국내 외 노출배관의 불연재 사용에 대한 실태를 바탕으로 관련법규를 개선함으로 국민안전에 대하여 그 효율성을 제고한다.

중소형화재실험을 이용한 외단열 시스템(EIFS) 화재위험성평가에 관한 연구 (A Study on the Fire Risk Assessment of EIFS by Cone Calorimeter Test & Single Burning Item Test)

  • 민세홍;김미숙
    • 대한안전경영과학회지
    • /
    • 제12권1호
    • /
    • pp.1-9
    • /
    • 2010
  • Recently, in circumstantial situation it is recommended positively to utilize of EIFS(Exterior Insulating and Finishing System) as energy policy for economizing energy. But internal EPS insulators of EIFS are exterior panel of high fire risk, because of constituting of flammable materials to be fragile in fire. In this study, fire risk is assessed by experiment Con Calorimeter test and SBI(Single Burning Item) test. As the result of experiment, Con Calorimeter tests do not reach to capability standard of internal incombustible grade, and are assessed as low grade in SBI incombustible grade. Because EIPS is exterior material in buildings with high fire risk in spite of good efficiency, it is required rapidly to take measures to meet situation through various studies(for instance, adjusting law regulation, etc.) in the future.

복합자재 화재확산방지구조에 대한 연구 (A Study on Flame Spread Prevention of Sandwich Panel)

  • 조남욱;김도현;심지훈
    • 한국화재소방학회논문지
    • /
    • 제29권6호
    • /
    • pp.84-90
    • /
    • 2015
  • 복합자재(샌드위치패널)는 불연성재료인 양면 철판 또는 이와 유사한 재료와 불연성이 아닌 재료인 심재로 구성된다. 단열재를 가연성 재료로 사용하는 샌드위치패널은 화재 시 철판 내부로 화염이 확산되어 외부에서 진화가 어렵고 화염의 확산이 빠르게 진행되어 건물의 붕괴를 야기할 수 있다. 현행 건축법에 의해 샌드위치패널은 건축물의 용도 및 규모에 따라 난연성능을 확보하도록 하고 있다. 본 연구에서는 일부 외벽에 적용되는 화재확산방지구조를 복합자재에 적용하여 실제 규모의 화재시험을 통해 그 효과를 측정하였으며 향후 복합자재에서도 화재확산방지구조의 적용을 통해 복합자재 건축물의 화재안전 확보 가능성을 제시하였다.

CEN/TS 45545 출범에 따른 철도차량 화재안전 기술 동향에 대한 연구 (A Study on Technical Trend of Fire Safety on Railway Vehicles for Launch CEN/TS 45545)

  • 성시영;우이완;박재홍
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2010년도 춘계학술대회 논문집
    • /
    • pp.1768-1773
    • /
    • 2010
  • CEN/TS 45545 is Europe consolidation standard for fire safety on railway behicles. This is based on the International Union of Railways(UIC) and different European countries. It is intended to protect passengers and staff in railway in the event of a fire on board. It will be prepared in 2012. Based on this consolidate standard, they are going to make single market, for raising technical competitiveness, technical innovation and globalization of that standard. For this reason, European academies, manufacturers, and sub-manufacturers confer and stady animated about CEN/TS 45545. In Korea, get out the safety assessment for ues incombustible interior material, the needs of quantitative analysis on fire protection, demand on recognition of fire protection scenario, and define about fire load analysis are becomin more and more important. Therefore, this paper will estimate and compare Flammability, Smoke Density, Toxicity Index( this is the key point for appraised fire safety performance of material) between CEN/TS45545 and fire standards on railway vehicle. Then suggest criteria for fire safety on railway vehicles.

  • PDF

경량 폴리머 콘크리트의 난연성 및 동결융해 저항성 (Incombustibility and Freezing-Thawing Resistance of Lightweight Polymer Concrete)

  • 채경희;최예환;연규석;이윤수;주명기
    • 한국농공학회지
    • /
    • 제45권1호
    • /
    • pp.45-54
    • /
    • 2003
  • The effects of binder content and silica sand content on the durability characteristics of lightweight polymer concretes are examined. As a result, the flame lingering times using unsaturated polyester resin and non-combustible polyester resin were 60∼120 and 0∼4 seconds respectively, and the combustion lengths were 9∼11 mm and 0∼3 mm, respectively. Thus it is believed that the lightweight polymer concrete was incombustible and the light weight polymer concrete in which non-combustible material was added was perfectly non-combustible. The percent of original mass of lightweight polymer concrete, according to the freezing-thawing experiment, was below 0.3 %, which was much less than that of cement concrete. The pluse velocity, for the case of the binder content 28 %, showed the minimum decreasing rate for the lightweight polymer concrete with silica sand content of 50 %. The higher the binder content, the greater the durability. That is much higher than other material and believed that the freezing-thawing was suppressed by a low absorption.

Decomposition of PVC and Ion Exchange Resin in Supercritical Water

  • Kim Jung-Sung;Lee Sang-Hwan;Park Yoon-Yul;Yasuyo Hoshikawa;Hiroshi Tomiyasu
    • 한국환경과학회지
    • /
    • 제14권10호
    • /
    • pp.919-928
    • /
    • 2005
  • This study introduces the development of new supercritical water oxidation(SCW)(multiple step oxidation) to destruct recalcitrant organic substances totally and safely by using sodium nitrate as an oxidant. This method has solved the problems of conventional SCW, such as precipitation of salt due to lowered permittivity, pressure increase following rapid rise of reaction temperature, and corrosion of reactor due to the generation of strong acid. Destruction condition and rate in the supercritical water were examined using Polyvinyl Chloride(PVC) and ion exchange resins as organic substances. The experiment was carried out at $450^{\circ}C$ for 30min, which is relatively lower than the temperature for supercritical water oxidation $(600-650^{\circ}C)$. The decomposition rates of various incombustible organic substances were very high [PVC$(87.5\%)$, Anion exchange resin$(98.6\%)$, Cationexchange resin$(98.0\%)$]. It was observed that hetero atoms existed in organic compounds and chlorine was neutralized by sodium (salt formation). However, relatively large amount of sodium nitrate (4 equivalent) was required to raise the decomposition ratio. For complete oxidation of PCB was intended, the amount of oxidizer was an important parameter.

Decomposition of PVC and Ion exchange resin in supercritical water

  • Lee, Sang-Hwan;Yasuyo, Hosgujawa;Kim, Jung-Sung;Park, Yoon-Yul;Hiroshi, Tomiyasu
    • 한국환경과학회:학술대회논문집
    • /
    • 한국환경과학회 2005년도 봄 학술발표회지 제14권(제1호)
    • /
    • pp.267-271
    • /
    • 2005
  • This experiment was carried out at 450"C, which is relatively lower than the temperature for supercritical water oxidation (600-650$^{\circ}C$). In this experiment, the decomposition rates of various incombustible organic substances were very high. In addition, it was confirmed that hetero atoms existed in organic compounds and chlorine was neutralized by sodium(salt formation).However, to raise the decomposition rate, relatively large amount of sodium nitrate(3-4 times the equivalent weight) was required. When complete oxidation is intended as in the case with PCB, the amount of oxidizer and decomposition cost is important. But when vaporization reduction is required as in the case with nuclear wastes, the amount of radioactive wastes increases instead. But as can be seen in the result of XRD measurement, unreacted sodium nitrate remained unchanged. If oxidation reaction of organic substance simply depends on collision frequency, unreacted sodium nitrate can be recovered and reused, then oxidation equivalent weight would be sufficient. In the gas generated, toxic gas was not found. As the supercritical water medium has high reactivity, it is difficult to generate relatively low energy level SO$_{X}$, and NO$_{X}$.

  • PDF

A Study the Physicochemical Characteristics of Municipal Solid Wastes

  • Kim, Young-Sik
    • 한국환경보건학회지
    • /
    • 제29권4호
    • /
    • pp.35-41
    • /
    • 2003
  • The objective of this study was investigate the generation rates, composition, proportion and calorific values each of material in the municipal solid wastes as well as the effect of incineration residual leachate on the environment in Yangsan sanitary landfill site. The results were as follows ; The annual average generation rate of municipal solid wastes in Yang-san is approximately 2.0 kg/cㆍd. The weight percent of combustible matters is on average 78∼87% and the lower heating values of municipal solid wastes is measured to be more than 2,151 kcal/kg after removing the briquette component. The food waste was major source of solid wastes in Yang-san city as 35% and its variation by seasons was negligible. Combustible part was larger than incombustible part of the domestic solid wastes in spring and summer. It is recommended that municipal solid wastes be treated by multiple methods such as the sanitary landfill, resources and recovery, composting and incineration.