• Journal of Korean Neurosurgical Society
• /
• 제37권6호
• /
• pp.422-426
• /
• 2005

Objective: Different types of interbody fusion cages are available for use in the surgical treatment of degenerative cervical diseases. The purpose of this study is to assess the technical feasibility, clinical efficacy and radiological results of intervertebral fusion with a carbon composite Osta-Pek frame cage (Co-Ligne AG, Switzerland) following anterior cervical discectomy. Methods: 41 patients (25males and 16females) with minimum 6months follow-up were included in the study. Disc height, cervical lordotic angle, segmental angle, and fusion rate were assessed by lateral radiographs. In this retrospective analysis, clinical outcome was assessed as evaluated according to Odom's criteria. Results: Fifty-four cages were implanted in 30 single-level, 9 two-level, and 2 three-level procedures. The mean disc height, cervical lordosis angle, segmental angle were $4.2{\pm}1.8mm,\;23.5{\pm}7.2^{\circ},\;2.3{\pm}3.3^{\circ}$ pre-operatively and $5.3{\pm}2.1mm,\;24.2{\pm}8.3^{\circ},\;3.8{\pm}3.5^{\circ}$ at 6months after the surgery. Six months after surgery, there was radiographic evidence of fusion in 92.7% (38/41) of the patients. According to Odom's criteria, 37 of 41 (90.2%) patients experienced good to excellent functional recovery. Conclusion: These clinical and radiological results suggest that the carbon composite Osta-Pek frame cages are safe and effective alternative to autologous bone graft after anterior cervical discectomy for treatment of degenerative cervical disease.

• 대한치과보철학회지
• /
• 제41권1호
• /
• pp.61-70
• /
• 2003

The purpose of this study was to investigate the contact angles and wettability of conventional dental stones and improved dental stones and newly developed dental stones on several impression materials. Materials included in this study were several dental stones and newly developed dental stone ; 2 type III stones (Snow Rock, New Diastone), 6 type IV stones(Crystal Rock, Vel Mix, Fuji Rock, Tuff Rock, Resin Rock and newly developed dental stone) and 1 type V stone (Die Keen). Contact angles on the impression materials were measured with contact angle measuring device. Ten specimens for each material, total 180 specimens were made on void entrapment model. The two impression materials (Handae, GC) were used to produce 9 groups of die stone casts form void entrapment model. Voids in the stone casts were counted under a stereoscopic microscope. The grad for the reproduction ability of each materials on the void entrapment model was calculated from the casts by one examiner. From the experiment, the following results were obtained : 1. The newly developed stones showed smallest contact angle. Type III dental stone had larger contact angles than type IV and V stones. Contact angle was much affected by the impression materials. 2. Resin containing die materials such as Tuff Rock and Resin Rock had smallest void number than any other groups. 3. In comparing reproduction parameters, Tuff Rock and Resin Rock presented superior results, while Vel Mix showed lowest reproduction ability.

• The Journal of Advanced Prosthodontics
• /
• 제10권4호
• /
• pp.279-285
• /
• 2018

PURPOSE. The aim of this clinical study was to assess the accuracy of the implants placed using a universal digital surgical guide. MATERIALS AND METHODS. Among 17 patients, 28 posterior implants were included in this study. The digital image of the soft tissue acquired from cast scan and hard tissue from CBCT have been superimposed and planned the location, length, diameter of the implant fixture. Then digital surgical guides were created using 3D printer. Each of angle deviations, coronal, apical, depth deviations of planned and actually placed implants were calculated using CBCT scans and casts. To compare implant positioning errors by CBCT scans and plaster casts, data were analyzed with independent samples t-test. RESULTS. The results of the implant positioning errors calculated by CBCT and casts were as follows. The means for CBCT analyses were: angle deviation: $4.74{\pm}2.06^{\circ}$, coronal deviation: $1.37{\pm}0.80mm$, and apical deviation: $1.77{\pm}0.86mm$. The means for cast analyses were: angle deviation: $2.43{\pm}1.13^{\circ}$, coronal deviation: $0.82{\pm}0.44mm$, apical deviation: $1.19{\pm}0.46mm$, and depth deviation: $0.03{\pm}0.65mm$. There were statistically significant differences between the deviations of CBCT scans and cast. CONCLUSION. The model analysis showed lower deviation value comparing the CBCT analysis. The angle and length deviation value of the universal digital guide stent were accepted clinically.

• 한국운동역학회지
• /
• 제21권5호
• /
• pp.561-571
• /
• 2011

The purpose of this study was to perform the kinematic analyses of the women's pole vault skills in IAAF World Championships Daegu 2011. Subjects were the 1st through 8th place finishers in the pole vault. The kinematic analyses were divided into four phases: two dimensional run up analysis, and three dimensional analyses for the remaining plant, swing up, and extension phases. Run-up variables consisted of run up distance, number of steps, average step length, ratio of step length to height, average velocity at the final 5~10 m, approach position. Three variables were analyzed during plant: pole angle, center of gravity (COG) velocity, and COG takeoff angle. Swing up phase variables included: pole flection angle, COG velocity (horizontal, vertical, resultant), COG trajectory and bar approach angle of COG. Compared to the 2009 World Championships in Berlin, the average vault height increased, while run up velocity and approach position were almost unchanged. However, horizontal velocity during the last two steps of the final approach decreased noticeably compared to speeds from 1990. These results reflect the change in both technique and physical fitness in pole vaulters. During extension, the peak height of COG surpassed the clearance height by an average of 0.11m. These specific results can help coaches and athletes modify training and improve performance.

• Journal of Biosystems Engineering
• /
• 제40권1호
• /
• pp.10-18
• /
• 2015

Purpose: The study was conducted to investigate the proper working conditions like the mesh size of the concave and the chaffer angle of the oscillating sieve, and the fan speed of the head-feeding rice combine for foxtail millet harvesting. Methods: The study aimed to determine the harvesting conditions for the rice combine harvester at a 0.5 m/s working speed and at $40^{\circ}$ and $55^{\circ}$ sieve chaffer angles. The harvesting loss of the foxtail millet based on the speed of the fan and the oscillating speed of the sieve was measured at three levels of fan speed and oscillating sieve speed. Results: The threshing rates of different foxtail millet varieties were 64.1~83.5% at a mesh size of 7 mm of the concave. In experimental foxtail millet harvesting, the optimal operating condition of the rice combine harvester included a $40^{\circ}$ sieve chaffer angle and a 4.8 Hz oscillating sieve (cleaning shoe) frequency. The grain loss was found to be lower at a $40^{\circ}$ than at a $55^{\circ}$ sieve chaffer angle. In field harvesting using the combine harvester, the lowest harvesting grain loss rate of the foxtail millet varieties ranged between 0.2~0.5% at a 7 mm mesh concave, $40^{\circ}$ chaffer angle, 4.8 Hz sieve frequency, and a 20 m/s fan speed at an engine speed of 2,000 revolutions per minute (RPM). Conclusions: Findings showed that foxtail millet could be harvested using the combine harvester.

• 한국전문물리치료학회지
• /
• 제13권4호
• /
• pp.47-55
• /
• 2006

The purpose of this study was to compare the static balance of standing position between adolescent idiopathic scoliosis (AIS) and a normal group that were aged-matched. There were forty subjects included in this study. Twenty-seven healthy subjects (age, $13.9{\pm}1.2$ yrs; height, $161.9{\pm}7.5$ cm; weight, $52.2{\pm}7.7$ kg) and thirteen AIS subjects (age, $14.2{\pm}2.2$ yrs; height, $161.5{\pm}8.7$ cm; weight, $48.1{\pm}8.1$ kg) were participated in the study. The thirteen subjects in the AIS group had a major Cobb angle between $20.1^{\circ}$ and $49^{\circ}$. Each group was tested with the Balance Performance Monitor (BPM). The parameters for static balance were sway area, sway path, max velocity, mean balance, anterior-posterior angle, and left-right angle of each group with their eyes opened and again with their eyes closed. Both sides of the forward reach test and the lateral reach test were also performed on each group. Results from the BPM tested showed significantly increases in all parameters of static balance with those patients with AIS under the conditions where eyes were opened and closed. In the right and left forward reach test, there was no significant difference between normal and AIS groups. However, in the lateral reach test with right and left direction, there were significant differences between normal and AIS groups. For the normal subjects, there were significant differences in the parameters with sway path and anterior-posterior sway angle between the eyes opened and closed. However, there were no significant differences in the all parameters between eyes opened and closed for the AIS subjects. These results suggest that, balance programs could be used in the rehabilitation setting for intervention of AIS and evaluation of AIS. Further study is needed to measure many patients with AIS and other functional balance scales for clinical application.

• 대한족부족관절학회지
• /
• 제21권2호
• /
• pp.55-60
• /
• 2017

Purpose: Stiffness in the first metatarsophalangeal joint after surgery for hallux valgus has been reported. The goal of this study was to test the efficacy of releasing plantar aponeurosis for improving the range of extension in the first metatarsophalangeal joint that was limited after hallux valgus surgery. Materials and Methods: Thirteen patients (1 man, 12 women [17 feet]; median age, 54.4 years; range, 44~69 years) with limited first metatarsophalangeal joint extension after hallux valgus surgery, who underwent an additional procedure of plantar aponeurosis release between March 2015 and August 2015, were included. Subsequently, the passive range of extension in the first metatarsophalangeal joint was evaluated via knee extension and flexion positions. Hallux valgus angle, inter-metatarsal angle, distal metatarsal articular angle, and talo-first metatarsal angle were measured on weightbearing dorsoplantar and lateral radiographs of the foot preoperatively. Results: The mean range of extension for the first metatarsophalangeal joint improved significantly, from $2.5^{\circ}$ to $40.9^{\circ}$ in the knee extension position (p<0.00). The mean extension range for the first metatarsophalangeal joint also improved, from $18.2^{\circ}$ to $43.2^{\circ}$ in the knee flexion position (p<0.00). In all patients, congruence of the first metatarsophalangeal joint was recovered. Conclusion: Plantar aponeurosis release is an effective additional procedure for improving the extension range of the first metatarsophalangeal joint after hallux valgus surgery.

• 대한치과교정학회지
• /
• 제46권3호
• /
• pp.137-145
• /
• 2016

Objective: The purpose of this study was to investigate the characteristics of orthodontic patients at Yonsei Dental Hospital from 2008 to 2012. Methods: We evaluated Angle's classification from molar relationships, classification of skeletal malocclusion from the A point-nasion-B point angle, facial asymmetry, and temporomandibular joint disorders (TMDs) from the records of 7,476 patients who received an orthodontic diagnosis. The orthognathic surgery rate, extraction rate, and extraction sites were determined from the records of 4,861 treated patients. Results: The patient number increased until 2010 and gradually decreased thereafter. Most patients were aged 19-39 years, with a gradual increase in patients aged ${\geq}40years$. Angle's Class I, Class II divisions 1 and 2, and Class III malocclusions were observed in 27.7%, 25.6%, 10.6%, and 36.1% patients, respectively, with a gradual decrease in the frequency of Class I malocclusion. The proportion of patients with skeletal Class I, Class II, and Class III malocclusions was 34.3%, 34.3%, and 31.4%, respectively, while the prevalence of facial asymmetry and TMDs was 11.0% and 24.9%, respectively. The orthognathic surgery rate was 18.5%, with 70% surgical patients exhibiting skeletal Class III malocclusion. The overall extraction rate among nonsurgical patients was 35.4%, and the maxillary and mandibular first premolars were the most commonly extracted teeth. Conclusions: The most noticeable changes over time included a decrease in the patient number after 2010, an increase in the average patient age, and a decrease in the frequency of Angle's Class I malocclusion. Our results suggest that periodic characterization is necessary to meet the changing demands of orthodontic patients.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제40권6호
• /
• pp.285-290
• /
• 2014

Objectives: We compared resorbable plates with titanium plates for treatment of combined mandibular angle and symphyseal fractures. Materials and Methods: Patients with mandibular angle and symphysis fractures were divided into two groups. The control (T) group received titanium plates while the experimental (R) group received resorbable plates. All procedures were carried out under general anesthesia using standard surgical techniques. We compared the frequency of wound dehiscence, development of infection, malocclusion, malunion, screw breakage, and any other technical difficulties between the two groups. Results: Thirteen patients were included in the R group, where 39 resorbable plates were applied. The T group consisted of 16 patients who received 48 titanium plates. The mean age in the R and T groups was 28.29 and 24.23 years, respectively. Primary healing of the fractured mandible was obtained in all patients in both groups. Postoperative complications were minor and transient. Moreover, there were no significant differences in the rates of various complications between the two groups. Breakage of 3 screws during the perioperative period was seen in the R group, while no screws or plates were broken in the T group. Conclusion: Resorbable plates can be used to stabilize combined mandibular angle and symphysis fractures.

• 대한족부족관절학회지
• /
• 제16권1호
• /
• pp.31-37
• /
• 2012

Purpose: The purpose of our study is the comparison of radiological and clinical outcomes between modified distal chevron osteotomy and proximal metatarsal osteotomy for the patients who had moderate to severe hallux valgus deformity. Materials and Methods: In this retrospective study, we included 54 patients (65 feets) who underwent the operation of moderate to severe hallux valgus in our hospital from May 2007 to August 2010. Our study compares two groups. For Group 1, a modified distal chevron osteotmy and a distal soft tissue procedure were done and for Group 2, a proximal metatarsal osteotmy and a distal soft tissue procedure were done. The group 1 were 29 feets; the group 2 were 36 feets, and the average follow up was 9 months. Results: The radiological results show that the hallux valgus angle and the first-second intermetatarsal angle were significantly decreased in two groups. In each parameter, the correction of the hallux valgus angle was $19.1^{\circ}$ (Group 1) and $24.3^{\circ}$ (Group 2), the correction of the first-second intermetatarsal angle was $9.6^{\circ}$ (Group 1) and $10.3^{\circ}$ (Group 2). Shortening of the first metatarsal length was 0.87 mm (Group 1) and 0.77 mm (Group 2). There are no significant clinical results (American Orthopaedic Foot and Ankle Society score, AOFAS score) in two groups. Conclusion: It is thought that a modified distal chevron osteotomy and a distal soft tissue procedure are a considerable operative treatment of moderate to severe hallux valgus deformity because of the similar cilinical results, more simple operative techniques, and less complications than a proximal metatarsal osteotomy.