• 한국화재소방학회논문지
• /
• 제27권6호
• /
• pp.1-7
• /
• 2013

본 연구에서는 옥외소화전의 디스크 형상을 고려한 압력손실에 관한 실험 및 수치해석 연구를 수행하였다. 옥외소화전의 압력손실은 국제 시험규격인 Underwriters Laboratory (UL)에서 제시하고 있는 시험방법을 적용하였으며, 옥외소화전의 입 출구 배관 직경을 고려한 압력손실 실험 장치를 제작하였다. 본 연구에서 사용한 옥외소화전은 입구 직경 150 mm 1개와 토출부 직경 63.5 mm 2개 그리고 직경 114.3 mm 1개인 구조로 직경 63.5 mm인 토출부는 유량범위 760 L/min~2,270 L/min, 직경 114.3 mm인 토출부는 3,030 L/min~6,060 L/min 범위에서 압력손실을 측정하고 유량계수를 구하였다. 동일한 실험조건에서 상용해석프로그램인 ANSYS Ver.14.0을 사용하여 압력손실 측정값과 해석결과를 비교하여 정확성을 확인하였으며, 다양한 디스크 형상을 모델링하여 압력손실에 중요한 영향을 미치는 인자를 분석하였다. 그 결과 옥외소화전은 디스크의 경사 각도가 $0^{\circ}$~$45^{\circ}$인 경우 유량계수는 494.46~680.64 ($L/min/kPa^{0.5}$)로 경사각이 작을수록 압력손실이 가장 낮게 나타나는 것을 수치적으로 분석하였다. 본 연구 결과는 옥외소화전의 성능인 압력손실을 예측하기 위한 디스크 형상의 설계 자료로 활용이 가능함을 확인하였다.

• 대한치과보철학회지
• /
• 제36권2호
• /
• pp.323-335
• /
• 1998

Clinically, the curve of Spee is widely applied as a determined level of the occlusal curvature when the oral rehabilitation and the reconstruction of the prosthesis is needed at the malalignment dentition due to the missing, extrusion, and the inclination of the teeth. The purpose of this study was to analyze the curve of Spee of the occlusal curvature which influences to the occlusal form and the location three dimensionally, and then was to measure the radius and the degree of curvature of the curve of Spee and also was to investigate the influence to the cuspal inclination according to the change of the inclination of the curve of Spee which was analyzed by AutoCAD R.13 program at the gnathological cast and the cephalometric radiograph. The following results were obtained : 1. The radius of the curve of Spee was the mean of $11.74{\pm}3.64cm$ in the model, $12.75{\pm}4.63cm$ in the radiograph and there was no significant difference statistically between the model and the radiograph(P>0.001). 2. The radius and the degree of curvature of the curve of Spee showed negative correlation(r=-0.80), while the radius and the degree of curvature of the curve of Spee in relation to the length of the curve of Spee did not show correlation. 3. The case of the curve of Spee inclined to the posterior, that is. $Post.M{\theta}$ group showed the mean of $4.73{\pm}3.64$, positive correlation to the P2m, M1mm, M1dm, M2dm, and especially the greatest correlation coefficient to the mesial inclination angle of the mesio-buccal cusp tip of the first molar(r=0.70). 4. The case of the curve of Spee inclined to the anterior, that is, $Ant.M{\theta}$ group showed the mean of $3.28{\pm}3.59$, positive correlation to the P2m, M1mm, and also the greatest correlation coefficient to the mesial inclination angle of the mesio-buccal cusp tip of the first molar(r=0.78

• 한국의류학회지
• /
• 제36권3호
• /
• pp.311-323
• /
• 2012

This study establishes the initial data to develop a well-fitted underwear pattern by categorizing and analyzing torso types based on body measurements of women in their 50s and 60s. The results are as follows: First, the statistical assessment on the body measurements showed meaningful differences among age groups in twenty seven items (except for bust breadth, hip width armscye depth, hip depth, neck base circumference, armscye circumference, chest circumference, hip circumference, bishoulder length, shoulder length, front interscye, back interscye, weight and inclined angle of left shoulder). Women in their early 50s and late 60s (respectively) showed the highest values in height and depth. Second, there are five body factors according to the results of the factor analysis: Factor 1 (circumference, width, and depth of upper body measurements) - the degree of body depth and obesity, Factor 2 (height and vertical length) - The vertical torso length, Factor 3 - the size of shoulder, Factor 4 - the vertical upper body length, and Factor 5 - the size of shoulder angle. Third, the results of the cluster analysis showed that there are four distinctive body types. The largest number of the study subjects was related to Type 3 (30.69%), followed by Type 2 (26.78%), Type 1 (25.84%), and Type 4 (16.69%), respectively. For distribution of age groups by body type, Type 3 was the most common among the 60s group while Type 2 appeared most frequently among the 50s.

• 한국지진공학회논문집
• /
• 제2권2호
• /
• pp.95-104
• /
• 1998

수중 케이블의 동적 거동은 비선형 거동을 보이게 되는데 특히 기하하적 비선형성에 크게 영향을 받는다. 또한, 유체의 흐름으로 인하여 동적 거동의 해석은 더욱 복잡하고 어려워지기 때문에 해석적인 접근 방법에는 한계가 있다. 본 연구에서는 탄성 현수선 케이블요소에 동수력을 고려할 수 있게 하였다. 즉, 동수력을 받는 3차원 탄성 현수선 케이블를 정식화하고, 정적 및 동적 해석을 수행할 수 있는 유한요소 방법을 제시하였다. 동수력은 수정된 Morison 방정식을 이용하여 산정하였다. 제시된 방법으로 구한 수중케이블에 관한 동적 거동을 파악하려 하였으며, 정박 또는 예인에 사용하는 수중케이블의 경우 조류의 방향 및 케이블의 경사각에 따른 동적거동의 변화를 알아볼 수 있다.

• 비파괴검사학회지
• /
• 제16권2호
• /
• pp.86-94
• /
• 1996

파괴역학을 기초로 한 구조물의 수명 관리와 안전성 평가에 있어서, 결함의 크기는 매우 중요한 변수인자이다. 집중유도형 교류전위차법(ICFPD)은 구조물 부재의 표면, 이면 및 내면에 존재하는 결함을 검출하고, 그 크기를 측정하기 위하여 개발하였다. 본 비파괴법의 원리는 교류 전류가 흐르는 하나의 도선에 의하여 국부적인 영역에 전류를 집중적으로 유도하는 것을 이용하였다. 도선에 흐르는 전류는 일정 크기와 주파수를 갖는다. 금속표면에 유도된 전위는 탐촉자에 설치된 전위측정용 단자(potential pick-up pins)로 측정한다. 본 논문은 집중유도형 교류전위차법을 이용하여 평판 시험편에 도입한 표면결함과 이면결함을 평가하였다. 표면결함의 경우, 전위차 분포는 결함의 경사도에 따라 변화하고, 결함부와 결함단부의 전위차는 결함의 경사도 및 깊이에 따라 변화한다. 이면결함의 경우, 전위차 분포는 표면결함의 전위차 분포와 구분이 되며, 결함부에서의 전위차는 결함의 깊이에 따라 변화한다.

• 한국산업정보학회논문지
• /
• 제5권1호
• /
• pp.77-86
• /
• 2000

최근 들어 산업현장에서는 생산성의 향상, 노무비의 증가 및 노동력의 부족, 안전성 등을 이유로 자동생산시스템과 운반용 동력기계와 같은 기구를 도입하여 작업자 스스로가 자신의 근력을 이용한 인력운반(Manual Materials Handling : MMH) 작업이 줄어들고 있는 추세라고 하지만, 실제로 비탈진 경사면에 위치한 농장이나 과수원, 항만부두의 하역작업, 경사진 벌목장 작업, 광산의 막장에서의 작업등과 같이 주변환경이 복잡한 현장에서의 작업은 기계로 완전히 대체하기가 어려운 실정이다. 그러므로, 이러한 작업현장에서는 인간이 직접 손 운반작업(들기 작업)을 할 수밖에 없으며, 이와 같은 경사면에서의 손 운반작업(들기 작업)은 작업자에게 많은 재해의 위험성을 만들어 주며, 추락으로 인한 산업재해는 물론이고 미끄러짐 방지 같은 신체균형잡기 노력은 근골격 계통에 과도한 무리를 주게 되어 LBP의 원인이 되기도 한다. 하지만, 이러한 경사면에서의 손 운반작업(들기 작업)에 대한 연구에 대해서는 거의 없는 실정이다. 따라서, 본 연구에서는 force platform을 이용하여 경사면에서의 손 운반작업(들기 작업)을 통한 COP변화를 측정 ·분석하여 작업자들의 산업재해를 예방하고자 하며, 향후 이러한 기초 자료를 통하여 손 운반작업(들기 작업)뿐만 아니라 그 밖의 응용분야에 기여하고자 한다.

• 대한조선학회논문집
• /
• 제50권3호
• /
• pp.175-181
• /
• 2013

This paper presents a simulation for passenger ship evacuation considering the inclination of a ship. In order to describe a passenger's behavior in an evacuation situation, a passenger is modeled as a rigid body which translates in the horizontal plane and rotates along the vertical axis. The position and rotation angle of a passenger are calculated by solving the dynamic equations of motions at each time step. To calculate inclined angle of damaged ship, static equilibrium equations of damaged ship are derived using "added weight method". Using these equations, physical external forces due to the inclination of a ship act on the body of each passenger. The crowd behavior of the passenger is considered as the flock behavior, a form of collective behavior of a large number of interacting passengers with a common group objective. Passengers can also avoid an obstacle due to penalty forces acting on their body. With the passenger model and forces acting on its body, the test problems in International Maritime Organization, Maritime Safety Committee/Circulation 1238(IMO MSC/Circ.1238) are implemented and the effects of ship's inclination on the evacuation time are confirmed.

• 대한기계학회논문집B
• /
• 제25권11호
• /
• pp.1640-1649
• /
• 2001

The present study investigates the effects of various rib arrangements on heat/mass transfer in the cooling passage of gas turbine blades. A complex flow structure occurs in the cooling passage with rib turbulators which promote heat transfer on the wall. It is important to increase not only the heat transfer rates but also the uniformity of heat transfer in the cooling passage. A numerical computation is performed using a commercial code to calculate the flow structures and experiments are conducted to measure heat/mass transfer coefficients using a naphthalene sublimation technique. A square channel (50 mm $\times$ 50 mm) with rectangular ribs (4 mm $\times$ 5 mm) is used fur the stationary duct test. The experiments focus on the effects of rib arrangements and gap positions in the discrete ribs on the heat/mass transfer on the duct wall. The rib angle of attack is 60°and the rib-to-rib pitch is 32 mm, that is 8 times of the rib height. With the inclined rib angle of attack (60°), the parallel rib arrangements make a pair of counter rotating secondary flows in the cross section, but the cross rib arrangements make a single large secondary flow including a small secondary vortex. These secondary flow patterns affect significantly the heat/mass transfer on the ribbed wall. The heat/mass transfer in the parallel arrangements is 1.5 ∼2 times higher than that in the cross arrangements. However, the shifted rib arrangements change little the heat/mass transfer from the inline rib arrangements. The gap position in the discrete rib affects significantly the heat/mass transfer because a strong flow acceleration occurs locally through the gap.

• 대한소아치과학회지
• /
• 제25권2호
• /
• pp.430-440
• /
• 1998

This study was performed to establish the cephalometric standards and to compare measurement of Korean children in the Field I, II, III, IV, V, VI to Japanese and Caucasians by the Ricketts' analysis. Lateral cephalograms of 24 males and 27 females with normal occlusion and acceptable profile 9 years of age were obtained and statistically analyzed. 1. Norms of Korean males, females and both sexes at 9 years old were established. 2. Significant differences between male and female exist in incisor overjet, maxillary incisor protrusion, mandibular incisor inclination, cranial deflection, corpus length. Maxillary incisor of male was more protrude and overjet was larger than female 3. Korean was similar to Japanese but different from Caucasian. Compare with facial axis and facial depth, chin was retruded dolichofacial pattern and due to large mandibular plane angle and small corpus length, mandibular plane was inclined and mandible body was short. Compare with porion location, ramus position and posterior facial height, ramus was long and located posterior. Compare with maxillary depth and maxillary height, maxilla was located posterior and inferior. The distance between the upper molar and PTV was short, the amount of distalization is limited. Maxillary and mandibular incisor were more protruded and also lower lip was more protruded to esthetic line 4. In comparison between 9 and 11 years old, growth changes of facial depth, mandibular plane angle, corpus length and upper molar position were larger than that of Japanese and Caucasians.

• Physical Therapy Rehabilitation Science
• /
• 제6권1호
• /
• pp.39-44
• /
• 2017

Objective: The purpose of this study is to show the effectiveness of performing squat exercises at various angles to show the maximum muscle activity of the Vastus Medialis Oblique (VMO) and Biceps femoris (BF). Design: Cross-sectional study. Methods: A total of seventeen healthy young adults (8 males and 9 females) voluntarily participated in the study. All subjects randomly performed three different squat variations as follows: A squat performed with the ankle joint at $0^{\circ}$ of incline, a squat performed with the ankle joint at $5^{\circ}$ of incline, and a squat performed with the ankle joint at $10^{\circ}$ incline. Muscle activity was measured using surface electromyography. Electrodes were placed on the VMO and BF to measure the muscle activity on the various ankle angles for comparison analysis. Results: There was a significant increase in bilateral VMO muscle activation at $10^{\circ}$ of incline compared to $0^{\circ}$ and $5^{\circ}$ (p<0.05). Greater increases in muscle activation and exercise effect was observed with increasing incline angles of the board. Changes in bilateral BF muscle activity were found; however, none were found to be significant. Conclusions: Bilateral VMO activity was found to be significant when the squats were performed at an ankle angle of $10^{\circ}$ of incline when compared to at an ankle angle of $0^{\circ}$ and $5^{\circ}$ of incline. Squats performed on an incline can be recommended as an effective method to facilitate lower extremity muscle activities.