• 한국전자파학회논문지
• /
• 제15권11호
• /
• pp.1019-1025
• /
• 2004

직각 도파관 내의 주 모드인 TE$_{10}$ 모드의 필드 분포를 기준으로 만든 전송선 등가 모델을 바탕으로 슬롯 결합의 결합을 통해 급전하는 도파관 슬롯 배열 안테나를 설계하였다. 이를 위해 도파관 중심에 위치한 기울어진 슬롯(결합 슬롯)의 적절한 각도와 도파관 축 방향 슬롯(방사 슬롯)의 이격거리를 구해낸 후, 이를 EM 시뮬레이션을 통해 전자기적 특성을 파악하고 특성을 분석하였으며 실제 제작품 측정 결과 비교하였다. 측정된 반사손실 대역폭은 중심주파수 9.15 GHz에서 180 MHz, 부엽레벨은 -25 dB 이하, 반 전력 빔폭은 약 9$^{\circ}$, 이득은 25.5 dB이며 이러한 결과는 시뮬레이션 데이터와 유사하다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.435-435
• /
• 2010

A inclined slot-excited plasma source is newly designed and constructed for higher flux HNB(Hyperthermal Neutral Beam) generation. The present source is different from the vertical SLAN(SLot ANtenna) sources [1] in two aspects. One is that the slots are inclined, and the other is that the magnetic field is configured to a cusp type. These modifications are intended to make the source plasma operated in sub-milli-torr pressure regime and as thin as possible, both of which is to get higher HNB flux by decreasing the re-ionization rate of the reflected atoms from the neutralizer [2]. The plasma is generated in a quartz tube of internal diameter 170 mm enclosed in a aluminum application chamber of larger diameter 250 mm. The microwave power is fed to the plasma chamber by 8 inclined slots cut into the application chamber wall. The slots are coupled the chamber to a WR280 waveguide wound around it to form a ring resonator. In order to make two slots $\lambda_g/2$ apart in phase, the adjacent slots are rotated in opposite directions. The rotation angle of the slots are set to $60^{\circ}$ from the chamber axis. Between the quartz chamber and the aluminum cylindrical chamber 8 NdFeB magnets are equally spaced and fixed to form the cusp magnetic field confinement and ECR (Electron Cyclotron Resonance) field. In this presentation, the magnetic and electromagnetic simulations, and the measured plasma parameters are given for both the inclined and the vertical slot-excited plasma sources. We also discuss how the sources can be tailored to suit better-performing HNB sources.

• Environmental Engineering Research
• /
• 제20권3호
• /
• pp.298-305
• /
• 2015

The Standards for Water Works issued by the Korean government prescribed the insertion of inclined plates in a clarifier to enhance the settling of the suspended solids. In this study, in order to verify the role of the inclined plates, two identical laboratory-scale rectangular clarifiers were constructed and eight inclined plates were inserted into one of the clarifiers and inflow from same source was treated in both the clarifiers. Dye tests revealed that only the front three of the seven slots received the inflow at $0.57m^3/m^2{\cdot}h$, which was the highest SOR (surface overflow rate). Three different SORs, with 12 different SS (suspended solid) concentrations at each overflow rate, were fed to both clarifiers. However, the clarifier with the inclined plates failed to show an improved removal rate for the SS. In order to enable the Boycott effect within the slot, it is suggested that each slot created by the inclined plates receives equalized inflow. Moreover, collision of the inflow with the settled sludge at the bottom of the clarifier has to be avoided. These provisions, which can maximize the Boycott effect, should be added to the Standards for Water Works endorsed by Korean government.

• 한국전자파학회논문지
• /
• 제19권11호
• /
• pp.1223-1232
• /
• 2008

본 논문에서는 비공진형 협벽 도파관 슬롯 배열 설계를 위해 필요한 기준이 되는 단위 슬롯 어드미턴스를 해석적으로 추출하는 방법을 제시하였다. 충분한 개수의 동일 기울임 각을 가지는 교번 슬롯 구조에 대해, 도파관 협벽의 단위 슬롯과 단위 슬롯 양쪽에 이웃한 전송선 부분을 균일한 손실 전송선으로 근사하고, 이로부터 손쉽게 전체의 ABCD 행렬을 계산하여 전체의 시뮬레이션 또는 측정값과 비교함으로써, 손실 전송선의 복소 특성 임피던스와 복소 전파 상수를 구하고 해석 적으로 정규화 된 슬롯 어드미턴스를 추출하였다. 제안한 방법의 타당성을 입증하기 위해, 대역 협벽 도파관 슬롯 배열 설계용으로 제작된 기준 슬롯 도파관 샘플의 정규화 된 슬롯 어드미턴스를 구하고 기존의 방법으로 얻은 값과 비교하여 잘 일치함을 보였다.

• 한국전자파학회논문지
• /
• 제24권4호
• /
• pp.357-365
• /
• 2013

기판 집적 도파관(Substrate Integrated Waveguide: SIW) 기술을 이용한 Ka 밴드의 35 GHz용 $4{\times}4$ 평면 배열 안테나를 제시한다. 전체 안테나 구조는 3층의 PCB(Printed Circuit Board) 적층 형태로 구성되며, top PCB에는 45도로 기울어진 직렬 방사 슬롯이 평면 배열로 방사부를 이룬다. 또한, 균일한 전력을 전달하고 안테나 전체 단면적을 최소화하기 위해 middle 및 bottom PCB에는 급전 SIW가 위치한다. 전체 안테나 개구면의 면적은 $750.76mm^2$이며, 유전율 2.2의 RT/Duroid 5880 기판을 적층하여 설계하였다. 각 방사부 및 급전부의 개별적인 전기적 특성은 full-wave 시뮬레이터인 CST MWS를 이용하여 확인하였다. 나아가 제안된 평면 배열 안테나는 대역폭 (490 MHz), 최대 이득(18.02 dBi), 부엽 레벨(-11.0 dB), 교차 편파 레벨(-20.16 dB)의 전기적 특성을 보인다.

• 대한기계학회논문집B
• /
• 제28권8호
• /
• pp.961-967
• /
• 2004

An inclined jet impinging on a pin fin heat sink is proposed and investigated experimentally. To investigate the flow pattern, flow visualization using fluorescence and velocity measurement using particle image velocimetry(PIV) are conducted with water. The jet impinges over a wide span of the heat sink with a large recirculation in the upper free space and occasionally with another smaller one in the upstream corner. Further, thermal experimentation is conducted using air to obtain temperature profiles using a thermocouple rake in the air and using thermal image on the heat sink back plate, with impinging angles of 35, 45 and 55 degrees. The Reynolds number range based on the nozzle slot is varied from 1507 to 6405. The results show that impinging angle of 55 degree shows the largest heat transfer capability. The results of thermal experiment are compared and discussed with those of flow visualization.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.179-184
• /
• 1995

A new cutting parameter is defined in the spherical part of ball end-mill cutter. A series of slot cutting experiments were carried out to obtain the cutting parameter. The cutter contact area is expressed as the grid posiotion in the cutting plane using Z map. The cutting forces in each grid are calculated and saved as force map, prior to the average cutting forces calculation. The cutting force, in the arbitrary cutting area, can be easily calculated by summing up the cutting forces of the engaged grid in the force map. This model was verified in the inclined surface cutting by cutting test of a cylindrical part.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.139-142
• /
• 2004

X-band Waveguide slot way antenna is developed for heliborne MTD radar applications. The antenna is composed of multi-layer waveguide structures. Each of them has it's own functions, such as, radiation, power/phase distribution, coupling, etc. Broad-wall offset slots are used for radiators, inclined slots on broad-wall for power distribution to radiating(branch) waveguide, some kind of coaxial probe structures for in-phase coupling and H-plane T-junction power dividers. Antenna is realized by precision machining and careful assembly. It is tested and measured by 3m${\times}$l.7m planar near-field probe, which is set-up in MTG. Far-field calculations have good agreement in tolerable bounds. Special but necessary process such as brazing, will increase the accuracy and performance. Results show promising possibilities of future applications for real systems.

• Journal of electromagnetic engineering and science
• /
• 제13권4호
• /
• pp.214-223
• /
• 2013

This paper proposes a theoretical analysis of hidden device detection and a design of multiband circular polarization patch array antenna for non-linear junction detector system application. A good axial ratio of circular polarization patch antenna is realized by a new approach that employs inclined slots, two rectangular grooves and a truncated ground for the conventional antenna. A good axial ratio of the 1.5 dB lower is measured by having an asymmetric gap distance between the ground planes of the coplanar waveguide feeding structure. The common ground plane of the linear array has an optimum trapezoidal slot array to reduce the mutual coupling without increasing the distance between the radiators. The higher gain of about 1 dBi is realized by using the novel common ground structure. The measured return loss, gain, and axial ratio of the proposed single radiator, as well as the proposed array antennas, showed a good agreement with the simulated results.

• 설비공학논문집
• /
• 제26권12호
• /
• pp.594-599
• /
• 2014

There have been many cases that the air curtain installed in the apartment can not well remove the gases such as carbon dioxide and particles such as smokes, oils and vapors generated during the cooking to disperse the pollutants into the room. This study uses the numerical analysis to show how the pollutant-removing performance of the range hood is changed when the air curtain is installed on the range hood of kitchen. As a result of the study, it turned out that, when the air amount supplied by air curtain through the slot was about 60% of exhaust amount, the capturing efficiency of range hood for pollutants increased by 70~80% more than the case without the air curtain. Even when the exhaust amount was small, the capturing efficiency was improved a lot with the use of air curtain. In case that the air flow velocity of slot was greater than 2 m/s, the capturing efficiency turned out to decrease.