• Computers and Concrete
• /
• v.16 no.6
• /
• pp.881-896
• /
• 2015

A simultaneous analytical, experimental and numerical analysis of crack initiation, propagation and breaking process of the Central Straight through Crack Brazilian Disk (CSCBD) specimens under diametrical compression is carried out. Brazilian disc tests are being accomplished to evaluate the fracturing process based on stress intensity factors (SIFs). The effects of crack inclination angle and crack length on the fracturing processes have been investigated. The same experimental specimens have been numerically modeled by a higher order indirect boundary element method (HDDM). These numerical results are compared with the existing experimental results proving the accuracy and validity of the proposed numerical method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.267-272
• /
• 1998

A new signal processing technique, the directional harmonic wavelet map(dHWM), is presented to characterize the instantaneous planar motion of a measurement point in a structure from its transient complex-valued vibration signal. It is proven that the auto-dHWM essentially tracks the shape and directivity of the instantaneous planar motion, whereas the phase of the cross-dHWM indicates its inclination angle. Finally, the technique is successfully applied to an automobile engine for characterization of its transient motion during crank-on/idline/engine-off.

• Journal of KSNVE
• /
• v.8 no.5
• /
• pp.957-963
• /
• 1998

A new signal processing technique, the directional harmonic wavelet map(dHWM), is presented to characterize the instantaneous planar motion of a measurement point in a structure from its transient complex-valued vibration signal. It is proven that the directional auto-HWM essentially tracks the shape and directively of the instantaneous planar motion, whereas the phase of the directional cross-HWM indicates its inclination angle. Finally, the technique is suessfully applied to an automobile engine for characterization of its transient motion during crank-on/idling/engine-off.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.10a
• /
• pp.217-224
• /
• 1997

Static characteristics of hemispherical aerodynamic bearing is studied theoretically. In this paper nonlinear equation of second order considering compressibility and slip effect of air is calculated by Newton-Raphson method. Results indicate that axial load capacity has maximum value when the inclination angle of groove is about 30$\circ$, the ratio of groove clearance to ridge clearance is two. We also present the design method of hemispherical Aerodynamic bearing based on it's load capacity taking into account manufacturing and assembling viewpoint.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.84-84
• /
• 2004

다단 냉간단조 공정에서는 결함이 없는 재료의 유동, 금형내부의 완전한 충만과 금형의 수명향상 등을 위하여 예비성형체의 설계가 중요시되고 있다. 특히 최근 제품의 정밀도에 관심이 집중되어 냉간 상태에서 완제품으로 성형하여 후속 기계가공을 없앰으로써 재료의 절약, 에너지 절감, 가공공정수 단축 등 냉간단조를 고부가가치 가공의 유력한 수단으로 응용하려는 추세이다. 이러한 경우 예비성형체의 형상은 제품의 정밀도와 금형의 수명에 지대한 영향을 미친다.(중략)

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.1133-1138
• /
• 2000

The interface necessarily exists in joints using cement mortar, UP(Unsaturated Polyester : UP) mortar and SBR(SBR-latex) mortar. Characteristics of shear transfer in joint interface consisting of different materials are studied with experimental and analytical methods. The uniaxial compressive shear experiments are accomplished with various angle of inclination (35, 45, 55, 65, 75°), materials of old and new-cast mortar. In this study, The results are as follows ① Mohr-coulomb's slip theory be applied to the interface consisting different materials ② The cohesion of UP mortar is superior to that f cement mortar, SBR mortar.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.1001-1010
• /
• 1991

본 연구에서는 천이유동의 존재를 밝히고 천이영역과 경사각의 관계, 유동 및 열전달특성을 구명하고자 한다.이를 위해 유한차분방법(FDM)으로 수치해석하고 실 험결과와 비교, 검토하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.7
• /
• pp.1381-1390
• /
• 1992

This paper presents a dynamic characteristics of flow induced vibration of circular cylinder set with inclined angle against flow direction. The effect of the cylinder bounded by spiral fin and wire on the damping of flow induced vibration is investigated, i.e., inclined angle, spiral pitch angle and number of spiral thread are studied. As the results, the cylinder with spiral fin is most effective for the damping. Also the cylinder bounded by pitch angle 50.deg. and 2 spiral thread is most effective.

• Journal of Veterinary Clinics
• /
• v.37 no.2
• /
• pp.67-74
• /
• 2020

The purpose of this study is to identify clinical features of sound (non-lame) dogs with medial patellar luxation (MPL). Medical records of 72 dogs diagnosed with MPL were retrospectively reviewed. There were no significances in breed, sex, body weight, body condition score (BCS), osteoarthritis (OA) score, inclination of the femoral head angle (IFA), and mechanical medial proximal tibial angle (mMPTA) between sound and lame dogs, respectively. The mean age of sound dogs was significantly higher than that of lame dogs (P < 0.05), especially in MPL grade 3. The frequency of sound dogs with MPL grade 1 and 2 was 2.3 times higher than that of sound dogs with MPL grade 3 and 4 (P < 0.05). The anatomical lateral distal femoral angle (aLDFA) of sound dogs was significantly lower than that of lame dogs (P < 0.05). However, there were no statistical differences in aLDFA between sound and lame dogs in MPL grade 1, 2, and 4, except for MPL grade 3. This study suggests that in case of MPL grade 1 and 2, frequency of sound dogs is significantly high, and also that in MPL grade 3, if mean ± (standard deviation) age of the dogs is 7.4 ± 3.6 years old and the aLDFA is 105.6 ± 4.1 degrees, they are very highly possible to be sound dogs.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.6
• /
• pp.461-466
• /
• 2012

Recently, building energy systems with solar collector and solar module have increased to improve energy problem, a heat island, a global warming and carbon dioxide emissions. In this study, value of solar radiation in areas was analyzed using TRNSYS simulation, and the optimum tilt and orientation angle for installing a photovoltaic module was examined. Average values of the weather data in the past twenty years in areas were used as input data. The results show that the tilt angle of a photovoltaic module for gaining the annual maximum solar radiation varies in different localities, and values of the annual solar radiation gained by using the variable photovoltaic module increased by 2.5 percent as compared with that gained by using the fixed photovoltaic module. When fixed photovoltaic module is installed, it should be examined the tilt and orientation angle for installing a photovoltaic module was examined.