• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.4
• /
• pp.357-364
• /
• 2008

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.04a
• /
• pp.338-339
• /
• 1999

• Proceedings of the PSK Conference
• /
• 2000.04a
• /
• pp.125.2-126
• /
• 2000

• Proceedings of the SAREK Conference
• /
• 2003.07a
• /
• pp.4-4
• /
• 2003

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.291-298
• /
• 2003

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.798-801
• /
• 2009

소각로를 포함한 다양한 산업설비의 배폐열은 열병합 등의 다양한 방법을 통해 재활용되고 있으나 에너지의 효율적 사용과 편의성을 고려할 때, 단순한 온수공급 등의 방법보다는 전력으로서의 재활용이 매우 필요하다. 특히 재활용이 어려운 $400^{\circ}C$이내의 중저온급 폐열원을 발전할 수 있는 유력한 방안으로 열전발전기술이 최근 부각되고 있다. 열전발전은 발전모듈의 변환효율이 7~10%이고, 시스템 효율은 5%내외로 증기발전에 비해서는 낮지만 기계적 가동부분이 없어 고장발생이 적고 기동정지가 용이하며 열이 있으면 바로 발전이 가능한 차세대 친환경 발전기술이다. 본 연구에서는 현재까지 시도, 개발되지 못한 $100^{\circ}C$에서 $400^{\circ}C$내외 온도영역인 중저온급 소각폐열 회수를 위한 목적으로 중온용 열전발전소재 및 모듈과 저온과 중온에 각기 대응하여 폐열발전의 효용성을 높인 복식열전발전시스템을 개발 중에 있다. 본 고에서는 현재까지 진행된 일부 연구내용들을 소개하고자 하였다.

• Journal of the Korean Society of Combustion
• /
• v.8 no.1
• /
• pp.1-8
• /
• 2003

The behavior and characteristics of heavy metals at different streams in a MSWI(Municipal Solid Waste Incinerator) with a capacity of 100tonnes/day were investigated by measuring the concentration of heavy metals and gases and analyzing their leaching data from ashes. Metal components of Cr, Cu, Cd and Pb were in higher concentrations in the fly ashes collected after the water spray tower than in the bottom ashes. It was due to condensation by a lower temperature with water spray cooling. Metal contents in the bottom ash became higher for finer particles as expected. The mass balance of heavy metals in different stream was estimated from the analyzed data in bottom ash and collected dusts at different locations. For the lower volatility of metals such as Pb, Cu, Cr, 88-97% of them remained in the bottom ash, while Cd and Hg escaped from the combustor with remaining in bottom ash of 18.4 and 0.8%, respectively. In most cases the leaching rate of fly ash showed higher values than that of bottom ash, with the their average acidities of 9.8 and 11.9 respectively.

• Environmental Engineering Research
• /
• v.11 no.5
• /
• pp.257-265
• /
• 2006

The purpose of research is to mix the fly ash from municipal solid waste incinerator in the recycled Polypropylene and to recycle. The specimen was produced by mixing 20 wt.% of MSWI fly ash at maximum in the recycled Polypropylene and the particle size analyzer, DSC, TGA, SEM and UTM instruments were used to analyze the physical chemical properties of the specimen. As a result of measurement, the average particle size of MSWI fly ash was $18.08\;{\mu}m$. In TGA analysis, the temperature of specimen S-5 at 50% of weight decrease was risen by $7^{\circ}C$ higher than specimen S-1. In UTM measurement, specimen S-2 showed the maximum strength for tensile strength and specimen S-3 showed the maximum strength for flexural strength. But, impact strength was decreased according to the increasing proportion of MSWI fly ash. In conclusion, when the proper amount of MSWI fly ash was added to the recycled Polypropylene, thermal endurance, tensile strength and flexural strength could be increased, but impact strength was decreased.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2003.06a
• /
• pp.152-156
• /
• 2003

Air pollution problems due to the emission of pollutants from the various industrial facilities become serious issues and lots of air pollution control processes have been developed. To remove the SO$_2$ and NOx emitted from the solid waste incinerator and coal fired power plants, we studied the Ca-based sorbent which was prepared by waste clam and limestone. The objectives of this study were to develop a clam-based sorbent for removal of SO$_2$ and NOx, and to investigate the physicochemical properties of the waste clam sorbent. In order to determine acid gas removal capacity of sorbent, the batch study on SO$_2$ and NOx removal was performed with the Ca-based sorbent in the fixed bed reactor. Results of the research revealed that clam-based sorbent can be used as the iron-manufacturing industry and chemical adsorbents for the removal of acid gases because the lime content of the waste calm was more than 53.92%. From physicochemical analysis and gas reaction experiments, it could be concluded that clam is good sorbent for the removal of SO$_2$ and NOx in waste incinerator and flue gas desulfurization processes.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.12
• /
• pp.1755-1762
• /
• 1998

In order to minimize emission of polychlorinated dibenzo dioxins and polychlorinated dibenzo furans (PCDD/PCDFs) from municipal solid waste incinerators, it is important to maintain optimized operating conditions along with the system modification/improvement. Operating conditions of MSW incinerator make very complicated influence on formation of PCDD/PCDFs in each unit apparatus. For revealing these influences, concentrations of PCDD/PCDFs are measured from the stack and from the fly ash, while monitoring the plant operating conditions. The effects are grouped into 3 main categories, combustion conditions, de Novo synthesis effects, and adsorption/destruction effects in the flue gas treatment system. Interpretation of the results showed that de Novo synthesis effect, reformation by metalic catalyst, especially Cu in fly ash in the temperature range of $250{\sim}500^{\circ}C$, is found to influence most dominantly on the concentration of PCDD/PCDFs. A plausible mathmatical model for predicting concentration of PCDD/PCDFs is proposed, and discussed.