• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.1 s.22
• /
• pp.61-70
• /
• 2005

The most likely influenced by the oil pollution at the sea is the fisheries industry, because if the destruction if the marine ecological system The rate if compensation for damage from IOPC Fund due to the incident if oil pollution is more or less $20\%$, which is remarkably lower than those cf our adjacent nations or European nations. The reason such a low rate cf compensation is that it is not easy to take evidences if changed caused by oil pollution requested by IOPC Fund due to the environments if our fisheries. Therefore unless the environments if our fisheries is changed completely, it is very difficult to get actual compensation for damages under the existing system, considering the results if the oil pollution damage compensation claim cases up to now. In this study tried to identify the actual benefits of 03FC convention that raises the upper limit if the compensation while keeping the criterion for compensation And proposed to supplement the compensation system of damage caused by oil pollution with analyzing the actual status if compensation from. IOPC Fund for the our oil pollution incidents and the judgment if Supreme Court on the case if oil. pollution acident in Keumdong No.5.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.412-418
• /
• 2014

In this paper, for better boarding performance and pleasant boarding sensitivity of the ship, comparison and analysis was performed of motion sickness questionnaire with MSI(Motion Sickness Incidence) calculation based on ship motion theory(Strip Method) due to sea condition, incident angle in main sail way, economic speed, and calculation position of the training ship Kaya of Pukyong National University. On theses works, the rougher sea conditions became, the higher total motion sickness rate was occurred. The weights of vertical acceleration and the rates of MSI were higher at the bridge and the accommodation, which were located farther from the center of gravity of the ship. And effects of the vertical acceleration of the ship were increased in rolling then in head sea. In comparison between motion sickness questionnaire with MSI calculation, when the vertical acceleration increased, the motion sickness rate increased. The location to increase vertical acceleration and the location to cause motion sickness were agreed.

• Journal of Oriental Physiology
• /
• v.14 no.2 s.20
• /
• pp.199-208
• /
• 1999

As the average life span have been lengthened and the rate of senile population have been raised, chronic degenerative diseases incident to aging has been increased rapidly and become a social problem. With this social background, recently, the facts that oxygen radicals(OR) have toxic effects on Central Nervous System and Peripheral Nervous System and cause neuropathy such as Parkinson's Disease, Alzheimer Disease have been turned out, and accordingly lots of studies on the mechanism of the toxic effects of OR on nerves, the diseases caused by OR and the approaches to curing the diseases have been made. The purpose of this study is to examine the toxic effects caused by Glucose Oxidase(GO) and the effects of herbal extracts such as Chilbokyeum(CBY) on the treatment of the toxic effects. For this purpose, experiments with the cultured cell from the cerebrums of new born mice were done. The results of these experiments were as follows. 1. GO, a oxygen radical, decreased the survival rate of the cultured cells on NR assay and MTT assay 2. GO, a oxygen radical, increased lipid peroxidation and the amount of LDH. 3. CBY have efficacy of decreasing lipid peroxidation. 4. CBY have efficacy of decreasing the amount of LOH. From the above results, It is concluded that Chilbokyeum has marked efficacy as a treatment for the damages caused in the GO-mediated oxidative process. And Chilbokyeum is thought to have certain pharmacological effects on controlling over aging and treating Dementia. Further clinical study of this pharmacological effects of Chilbokyeum should be complemented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.3
• /
• pp.337-347
• /
• 2013

It is generally well-known that the inevitable high power electromagnetic wave affects the malfunction and disorder of electronic equipments and serious damages in electronic communication systems. Hence, it is necessary to take measures against high power electromagnetic(HPEM) wave for protecting electronic devices as well as human resources. The topological analysis based on Baum-Liu-Tesche(BLT) equation simplifying the moving path of electromagnetic and the observation points and Power Balance Method(PWB) employing statistical electromagnetic analysis are introduced to analyze relatively electrically large cavity with little time consumption. In addition to the PWB method, full wave results for cylindrical cavity with apertures and incident plane wave are presented for comparison with time-consumption rate according to the cavity size.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.278-278
• /
• 2009

A photovoltaic device consisting of arrays of radial p-n junction wires enables a decoupling of the requirements for light absorption and carrier extraction into orthogonal spatial directions. Each individual p-n junction wire in the cell is long in the direction of incident light, allowing for effective light absorption, but thin in orthogonal direction, allowing for effective carrier collection. To fabricate radial p-n junction solar cells, p or n-type vertical Si wire cores need to be produced. The majority of Si wires are produced by the vapor-liquid-solid (VLS) method. But contamination of the Si wires by metallic impurities such as Au, which is used for metal catalyst in the VLS technique, results in reduction of conversion efficiency of solar cells. To overcome impurity issue, top-down methods like noble metal catalytic etching is an excellent candidate. We used noble metal catalytic etching methods to make Si wire arrays. The used noble metal is two; Au and Pt. The method is noble metal deposition on photolithographycally defined Si surface by sputtering and then etching in various BOE and $H_2O_2$ solutions. The Si substrates were p-type ($10{\sim}20ohm{\cdot}cm$). The areas that noble metal was not deposited due to photo resist covering were not etched in noble metal catalytic etching. The Si wires of several tens of ${\mu}m$ in height were formed in uncovered areas by photo resist. The side surface of Si wires was very rough. When the distance of Si wires is longer than diameter of that Si nanowires are formed between Si wires. Theses Si nanowires can be removed by immersing the specimen in KOH solution. The optimum noble metal thickness exists for Si wires fabrication. The thicker or the thinner noble metal than the optimum thickness could not show well defined Si wire arrays. The solution composition observed in the highest etching rate was BOE(16.3ml)/$H_2O_2$(0.44M) in Au assisted chemical etching method. The morphology difference was compared between Au and Pt metal assisted chemical etching. The efficiencies of radial p-n junction solar Cells made of the Si wire arrays were also measured.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.1
• /
• pp.119-135
• /
• 2020

Objective : To investigate the epidemiology of newly-diagnosed, histologically-confirmed (NDHC) central nervous system (CNS) tumours and its changes over a 21-year period in a regional hospital in Hong Kong. Methods : This is a single-institute retrospective descriptive study of patients undergoing surgery for CNS tumours in a regional hospital of Hong Kong in the period from January 1996 to December 2016. The histological definition of CNS tumours was according to the World Health Organization classification, while the site definition for case ascertainment of CNS tumours was as set out by the Central Brain Tumour Registry of the United States. Patients of any age, who had NDHC CNS tumours, either primary or secondary, were included. The following parameters of the patients were retrieved : age at diagnosis, gender, tumour location, and histological diagnosis. Population data were obtained from sources provided by the Government of Hong Kong. The incident rate, estimated by the annual number of cases per 100000 population, for each histology grouping was calculated. Statistical analyses, both including and excluding brain metastases, were performed. Statistical analysis was performed with Microsoft Excel, 2016 (Microsoft, Redmond, WA, USA). Results : Among the 2134 cases of NDHC CNS tumours, there were 1936 cases of intracranial tumours and 198 cases of spinal tumours. The annual number of cases per 100000 population of combined primary intracranial and spinal CNS tumours was 3.6 in 1996, and 11.1 in 2016. Comparing the 5-year average annual number of cases per 100000 population of primary CNS tumours from the period 1996-2000 to 2011-2015, there was an 88% increase, which represent an increase in the absolute number of cases by 4.52 cases/100000 population. This increase was mainly contributed by benign histologies. In the aforementioned periods, meningiomas increased by 1.45 cases/100000 population; schwannomas by 1.05 cases/100000 population, and pituitary adenomas by 0.91 cases/100000 population. While gliomas had a fluctuating 5-year average annual number of cases per 100000 population, it only had an absolute increase of 0.51 cases/100000 population between the 2 periods, which was mainly accounted for by the change in glioblastomas. Conclusion : This retrospective study of CNS tumour epidemiology revealed increasing trends in the incidences of several common CNS tumour histologies in Hong Kong, which agrees with the findings in large-scale studies in Korea and the United States. It is important for different geographic locations to establish their own CNS tumour registry with well-defined and structured data collection and analysis system to meet the international standards.

• Journal of Trauma and Injury
• /
• v.29 no.4
• /
• pp.204-208
• /
• 2016

For an orthopaedic surgeon, the critical decisions to either amputate or salvage a limb with severe crushing injury with progressive ischemic change due to arterial rupture or occlusion can become a clinical dilemma at the Emergency Department (ED). And reperfusion injury is one of the fetal complications after vascular reconstruction. The authors present a case which was able to save patient's life by rapid vessel ligation at bedside to prevent severe reperfusion injury. A 43-year-old male patient with no pre-existing medical conditions was transported by helicopter to Level I trauma center from incident scene. Initial result of extended focused assessment with sonography for trauma (eFAST) was negative. The trauma series X-rays at the trauma bay of ED showed a multiple contiguous rib fractures with hemothorax and his pelvic radiograph revealed a complex pelvic trauma of an Anterior Posterior Compression (APC) Type II. Lower extremity computed tomography showed a discontinuity in common femoral artery at the fracture site and no distal run off. Surgical finding revealed a complete rupture of common femoral artery and vein around the fracture site. But due to the age aspect of the patient, the operating team decided a vascular repair rather than amputation even if the anticipated reperfusion time was 7 hours from the onset of trauma. Only two hours after the reperfusion, the patient was in a state of shock when his arterial blood gas analysis (ABGA) showed a drop of pH from 7.32 to 7.18. An imminent bedside procedure of aseptic opening the surgical site and clamping the anastomosis site was taken place rather than undergoing a surgery of amputation because of ultimately unstable vital sign. The authors would like to emphasize the importance of rapid decision making and prompt vessel ligation which supply blood flow to the ischemic limb to increase the survival rate in case of profound reperfusion injury.

• Korean Journal of Environmental Biology
• /
• v.22 no.4
• /
• pp.537-542
• /
• 2004

To reveal the relationship between the changes in the growth and photo- synthesis induced by low dose radiation, red pepper (Capsicum annuum L.) plants were serially irradiated three times with gamma rays of 0.5, 1, 2, 3, and 4 Gy. The plant growth was monitored by the fresh weight, the stem length, and the leaf length & width. All the irradiation groups (0.5-4 Gy) were stimulated in growth at 1 day after the $1^{st}$ irradiation (DA1I), but rather inhibited at 3 days after the $3^{rd}$ irradiation (DA3I). The maximum photochemical efficiency (Fv/Fm), the photochemical quenching (qP), the non-:photochemical quenching (NPQ) and the apparent rate of the photosynthetic electron transport (ETR) were used to represent the changes in the photosynthesis by the serial irradiation. The irradiation groups except 0.5 Gy had higher Fv/Fm values at 3 DA3I than the control one. After the 3$^{rd}$ irradiation, the qP values appeared to be a little lower in the 1-4 Gy groups than in the control and 0.5 Gy ones. In contrast, the NPQ values were rather higher in the irradiation groups except 0.5 Gy. During the whole experimental period, the ETRs decreased in the control group but remained relatively constant in the 4-Gy one. In conclusion, the results obtained indicate that the stimulatory effect of ionizing radiation on the plant growth was determined by the incident dose of the single irradiation rather than by the cumulative one of the serial irradiation. They also demonstrate that the growth stimulation induced by a low dose radiation could not be positively correlated with an alteration in the photosynthesis. Additionally, we discuss in text that an ionizing radiation may partly protect the leaf senescence by delaying the development of the plants.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.1
• /
• pp.165-171
• /
• 2000

The purpose of this study is to determine the prevalence of cataracts in a rural area of Kyung-Buk province. Cataract is the main cause of blindness and visual impairment in the world. Recently, the number of age-related cataract surgeries has increased remarkably. In spite of such an increase in the number of patients, there are still many cataract patients with highly deteriorated visual function who have had no occasion to receive an ocular examination. In order to screen such patients the author assessed 636 individual(1272 eyes) aged 50 years or more who had wanted to be examined generally in two area. Chilgok and Munkyung, Kyung-Buk province using a simplified cataract screening system recently proposed by Sasaki et al. Kanazawa Medical University in Japan. The results obtained are as follows. The number of visual impairment patients in this study group was 493(77.5%). They were screened by cataract screening system. Primary screening examination detected 448 subjects to be suspected of cataract while the subsequent secondary examination narrowed this number of subjects to 308(48.4%). Final number of subjects to be diagnosed of cataract was 421(66.2%). The rate of incidence, according to the age, was 27.5% in the 50 year-olds age group, 62.5% in the 60's age group, 86.1% in the 70's age group and 94.3% in the 80's age group and upwards. This results concluded that cataract is the main cause of blindness and visual impairment and is an important public eye health care problem of aged population in rural Korea. Methods of tackling the cataract problem(both backlog and incident), and other eye health needs are recommended. The need to extend eye health service to the rural areas is emphasized.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.10
• /
• pp.45-52
• /
• 2008

We investigated the design of an RF-powered, wireless temperature sensor tag chip using $0.18-{\mu}m$ CMOS technology. The transponder generates its own power supply from small incident RF signal using Schottky diodes in voltage multiplier. Ambient temperature is measured using a new low-power temperature-to-voltage converter, and an 8-bit single-slope ADC converts the measured voltage to digital data. ASK demodulator and digital control are combined to identify unique transponder (ID) sent by base station for multi-transponder applications. The measurement of the temperature sensor tag chip showed a resolution of $0.64^{\circ}C/LSB$ in the range from $20^{\circ}C$ to $100^{\circ}C$, which is suitable for environmental temperature monitoring. The chip size is $1.1{\times}0.34mm^2$, and operates at clock frequency of 100 kHz while consuming $64{\mu}W$ power. The temperature sensor required a -11 dBm RF input power, supported a conversion rate of 12.5 k-samples/sec, and a maximum error of $0.5^{\circ}C$.