• 설비공학논문집
• /
• 제16권8호
• /
• pp.770-777
• /
• 2004

Fouling and cleaning tests are performed for a uniquely designed 7,000 ㎉/hr fluidized bed heat exchanger for exhaust gas heat recovery. Fuel rich condition is maintained in the combustor for a limited time period to generate soot that is to be deposited on the heat transfer surfaces (fouling) and 600 Um glass beads are circulated inside the heat exchanger system for cleaning and enhancing the heat transfer performance. According to the present experimental study, performance degradation mode could be monitored and the effect of particle circulation on the heat transfer improvement could be identified. Through the present study, it is demonstrated that circulating particles contribute not only to the fouling reduction in gas side, but also to the heat transfer enhancement of the unit, while other possible aging factors including water side corrosion seemed to contribute to the accumulated performance deterioration.

• 멤브레인
• /
• 제18권1호
• /
• pp.65-74
• /
• 2008

자연산 유기물과 미세 입자는 분리막을 이용한 수처리 공정에서 반드시 제거되어야 하는 주요한 물질이다. 특히 휴믹물질은 막오염을 일으키는 자연산 유기물의 대표적인 물질로 알려져 있어 막여과 정수처리와 관련된 많은 연구에서 정수 원수를 모사하기 위해 이용되고 있다. 본 연구에서는 휴믹산 용액과 자연수의 한외여과시 막여과 및 세척 특성을 비교 분석하여 분리막 모듈의 실제 정수 원수 적용시 휴믹산 용액을 이용한 모사수가 가지는 대표성을 검토하고자 하였다. 정수원수의 막투과도는 5 mg/L 휴믹산 용액의 여과와 거의 같은 양상을 보였으나 유기물 및 탁도 제거율 측면에서 차이를 보였다. 용존성 유기물의 제거율은 휴믹산 용액에 비해 자연수의 제거율이 아주 낮으며 자연수 내에 존재하는 유기물은 분리막에 의해 거의 제거되지 않음을 알 수 있었다. 모사수의 제거율이 상대적으로 높게 나타난 이유는 유입수 내 유기물의 분자량 분포와 $UV_{254}$ 및 SUVA 값으로부터 휴믹산 용액 내 유기물의 크기 배제 및 소수성 흡착 때문인 것으로 사료된다. 미세입자 제거의 경우 입자 분포에 있어서 상대적으로 작은 크기의 카올린을 함유한 모사수가 자연수에 비해 한외여과 처리수의 탁도가 더 낮게 나타났다. 이는 입자 크기 자체보다는 입자의 형태가 분리막에 의한 입자 제거에 영향을 미치는 것으로 추정된다. 또한 화학세정을 통한 막성능 회복률의 경우 비슷한 막투과도를 보이며 오염을 일으킨 경우에도 모사수가 자연수에 비해 다소 높은 회복률을 보였고, 이 또한 모사수의 한계를 드러낸다고 하겠다.

• 센서학회지
• /
• 제25권3호
• /
• pp.213-217
• /
• 2016

The superhydrophobic and superoleophobic meshes surfaces have been used in various applications such as self-cleaning, anti-icing, gas exchange, oil-water separation, sound-wave penetrable anti-wetting structures, etc. In particular, there are many studies for oil-water separation with environmental issues. Because of high pressure and dynamic environment, oil-water separation filters must have stable surface properties as super-hydrophobicity and superoleophobicity. The oleophobicity of surface depends on the surface chemistry and roughness of the surface. The roughness of oleophobic surface enhances its static contact angle and stability. The multi-scale hierarchical structure provides a stable superhydrophobic state by maintaining a Cassie state. In this research, we fabricated a superoleophobic mesh with a multi-scale hierarchical structure to increase the pressure resistance and adjusted a size of the mesh hole.

• 한국자원식물학회지
• /
• 제17권3호
• /
• pp.219-226
• /
• 2004

양파의 생력재배를 위한 플러그 육묘시 성묘율 향상에 필요한 정보를 제공하고자 농우대고와 창녕 대고를 공시 품종으로 종자의 선종, priming, GA$_3$, 저온, 건조, 건조 중 광질의 개 별 처리가 발아율에 미치는 영향과 최적 개별처리를 조합한 종자처리가 유묘출현율에 미치는 영향을 추적하고자 본 연구를 실시하였던 결과 양파 종자에 처리를 가하기 전 선종이 발아율을 향상시키는 것으로 조사되었으며, 양파 종자의 발아율에 대한 priming과 GA$_3$처리 효과는 아주 미미하였던 반면, 저온처리 효과는 아주 큰 것으로 나타났다. 이러한 저온처리는 품종간 약간의 차이를 보일지라도 3일간 처리할 경우 발아율이 가장 양호하였다. 처리 종자의 건조방법으로는 건조하지 않는 것보다는 건조하는 것이, 건조할 경우 적색광을 조사하는 것이 발아율이 높았다. 유묘출현율은 선종된 종자를 저온처리를 가하지 않고 건조하는 것보다는 3-5일간 저온처리를 가한 후 적색광을 조사하면서 건조할 경우 높은 것으로 조사되었다.

• 유기물자원화
• /
• 제32권2호
• /
• pp.15-25
• /
• 2024

본 연구에서는 하수슬러지 필터프레스 공정에서 발생하는 오염 여과포에 대하여 가압수 및 초음파 세척에 대한 재생효율을 평가하였다. 이를 위하여 3톤 규모 하수슬러지 수열탄화물 처리 필터프레스로부터 오염된 여과포를 채취하였다. 먼저, 필터프레스 여과포의 오염 특성을 평가하였다. 오염 여과포의 위치에 따른 공기투과도와 단위질량을 측정하였으며, 새 여과포 측정값과 비교하였다. 다음으로 오염 여과포 전체 면적에 대하여 공기투과도 및 단위질량 분포를 지도화하여 오염 특성을 평가하였다. 마지막으로 오염 여과포를 대상으로 3 bar의 압력 세정 및 34, 76, 120, 168 kHz 주파수의 초음파 세척을 수행하였다. 이때, 여과포의 기공 오염 정도를 3단계로 나누어 세척효율을 평가하였다. 여과포 오염 비교 결과, 기공 오염은 여과물질이 지속적으로 투입, 압착되는 여과포 하부와 양측면 위주로 발생하였으며, 표면 오염은 전체면적에 걸쳐 고르게 나타났다. 가압 세척 결과, 공기투과도는 1.3-3.1%p 증가하였으며, 오염물질은 2.7-4.4% 제거되었다. 초음파 세척결과, 공기투과도는 12.5-61.5%p 증가하였으며 오염물질은 2.7-29.2% 제거되었다. 초음파 세척에서 주파수가 낮을수록 공기투과도 재생율과 오염물질 제거율이 우수하였다. 여과포의 기공 오염 정도가 클수록 초음파 세척 후 공기투과도 향상 및 오염물질 제거 효과가 우수하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.218-218
• /
• 2013

We report a simple and cost-effective method to fabricate transparent superhydrophobic surface on various substrates. The surface was fabricated by coating hydrophobic PDMS (polydimethylsiloxane) film on the silica nanoparticle and subsequent fixing of the hydrophobic silica nanoparticles onto substrates. The water contact angle for the prepared surface was determined to be over $150^{\circ}$, whichindicates that the surface is highly repellent to water. The hierarchical structure and roughness of the surface were examined by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Additionally, transparency of the prepared surface was measured with UV-VIS spectrometer. The transmittance of the superhydrophobic surface was ~80%, which is lower than that without PDMS-coated silica by only 5 to 10%. It is also notable that the superhydrophobic surface fully recovers its original transmittance after self-cleaning process. Also the PDMS coating is stable under a wide range of pH conditions, UV radiation and salinity conditions, which is essential for the practical use. Moreover, our fabrication method is applicable in large scale production.

• Asian Journal of Business Environment
• /
• 제10권4호
• /
• pp.29-34
• /
• 2020

Purpose: Town of Woldia, a semi-arid region in the Northern Wollo region of Ethiopia, faces water supply shortage in general, though the town possesses a running stream of clean water throughout the year. This study is aimed at analyzing the possibility of using rainwater for water scarcity and non-potable water needs of the Woldia University. A careful study and analysis have been made to assess the feasibility of using rainwater in place of the tap water supply. Research design and methodology: This study was done inside the main campus of Woldia University located in Woldia town. The runoff water from the roof of buildings was studied, by the time of rainfall in the town. Also, the budget needed for implementing a rainwater harvesting system was calculated. Results: The findings of the study clearly indicates that the requirements of the water to use for flushing, cleaning, and washing toilets in the administrative buildings and classrooms can be satisfied by using rainwater as an alternative to tap water. Conclusion: Based on the results the study finds it is benefitable for the Woldia University to install the rainwater harvesting system at the earliest to solve the water problems prevailing in the current situation.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.465-470
• /
• 2009

This study investigated the water saving technology for the toilet stool system in a water closet. Since in 21st century water would be the prospected factor to measure the wealth of a country instead of the oil, water saving technologies in the toilet stool in a closet system is getting more important than the cleaning stool and the reducing noise performances. According to the statistics in Korea the percentage of using water in toilet is about 27% to the total amount of water used. Therefore, this study theoretically approached the possible amount of water saving and suggested the new variable position straight trap device in the toilet stool system.

• 상하수도학회지
• /
• 제27권5호
• /
• pp.555-560
• /
• 2013

A cost analysis method for pretreament processes of a large scale seawater desalination plant was considered using a cost estimation model, WaTER (Water Treatment Estimation Routine). This model is based on cost functions of U.S. EPA to conduct economic analysis of water treatment facilities. A virtual seawater desalination plant which has pretreatment production capacity of $100,000m^3$ per day was chosen as a model plant. Dual media filtration and microfiltration systems were compared as pretreatment process, and the following reverse osmosis process was modeled. As a result, microfiltration showed a price competitiveness in condition of operating with reverse osmosis process by reducing the loads of water treatment and membrane cleaning despite it's high annual cost.

• Membrane and Water Treatment
• /
• 제2권3호
• /
• pp.147-158
• /
• 2011

Membrane distillation process was used for desalination of hot (333 K) geothermal water, which was applied in the plant producing heating water. The investigated water contained 120 g salts/$dm^3$, mainly NaCl. The mineral composition was studied using an ion chromatography method. The obtained rejection of solutes was closed to 100%, but the small amounts of $NH_3$ also diffused through the membrane together with water vapour. However, the composition of obtained distillate allowed to use it as a makeup water in the heating water system. The geothermal water under study was concentrated from 120 to 286 g NaCl/$dm^3$. This increase in the solution concentration caused the permeate flux decline by a 10-20%. The geothermal water contained sulphates, which was subjected to two-fold concentration to achieve the concentration 2.4-2.6 g $SO{_4}{^{2-}}/dm^3$ and the sulphates then crystallized in the form of calcium sulphate. As a results, an intensive membranes scaling and the permeate flux decline was observed. The XRD analysis indicated that beside the gypsum also the NaCl crystallites were deposited on the membrane surfaces. The fresh geothermal water dissolved the mixed $CaSO_4$ and NaCl deposit from the membrane surface. This property can be utilized for self-cleaning of MD modules. Using a batch feeding of MD installation, the concentration of geothermal water was carried out over 800 h, without significant performance losses.