• 대한화학회지
• /
• 제57권4호
• /
• pp.439-446
• /
• 2013

Chitosan (CS) and hydroxypropylmethyl cellulose (HPMC) blend microspheres were prepared by water-in-oil emulsion technique and were loaded with an anti-cancer drug 5-fluorouracil (5-FU). CS-HPMC microspheres were characterized by Fourier transform infrared spectroscopy to confirm the cross-linking reaction. Scanning electron microscopy (SEM) was also used to assess the surface morphology of particles prepared. The quantity of release of 5-FU from the microspheres have been studied in terms of blend composition and amount of cross-linking agent. Differential scanning calorimetry and X-ray diffraction techniques indicated a uniform distribution of 5-FU particles in microspheres, whereas SEM suggested the spherical structure of the microspheres with slight rough surface. The in vitro drug release indicated that the particle size and release kinetics depend upon blend composition, amount of cross-linking agent used and amount of 5-FU present in the microspheres.

• 한국수정란이식학회지
• /
• 제15권2호
• /
• pp.175-180
• /
• 2000

The possible use of micromanipulative biopsy and PCR of the biopsied embryonic cells was tested to produce sexed bovine embryos in practical terms. By micromanipulation and PCR techniques, higher survival rate and accurate sexing of demi-embryos were btained. Bovine oocytes matured and fertilized in vitro were co-cultured with bovine oviductal epithelial cell (BOEC) monolayer in USU-6 medium supplemented with 15% FBS, and the embryos of 37% (327/885) were developed to blastocysts. Among 111 blastocysts produced by invitro, only 7 (6.3%) embryos were found unable to determine their sex, probably due to the loss of cells, since no PCR product was found from those cells. All the remaining 104 (93.7%) demi-embryos survived micromanipulation and demonstrated male-specific product or bovine-specific product alone suggesting that correct sexing of the sample. Forty-three point one percent(25/58) of manipulated and cryopreserved demi-embryos after thawing were survived. Final verification of the sexed embryos is necessary to make sure the same sex in fetus and newborn calf upon embryo transfer. The established sexing method on a large number of bovine embryos from previous and this study suggests that this a could be used practically in the field.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 추계학술대회 논문집
• /
• pp.195-195
• /
• 2003

Combustion generated fine particles, defined as those with aerodynamic diameters less than 2.5 m, have come under increased regulatory scrutiny because of suspected links to adverse human health effects. Transition metals are of particular interest due to the results of a number of studies that have shown cardiopulmonary damage associated with exposure to these elements and their presence in coal, residual fuel oils, sewage sludge, and other combusted fuels and wastes. This lecture will review results from multi-di sciplinary studies being conducted at EPA and elsewhere examining the physical, chemical, and toxicological characteristics of combustion generated particles. The research describes how collaborative work between combustion engineers and health scientists can provide insight on how combustion processes affect particle properties and subsequent health effects as measured by a combination of in-vitro and in-vivo studies using a variety of animal models. The focus of this lecture is on the interdisciplinary approach required to address the problem. Difficulties are discussed. Engineering aspects involved in this approach are described in detail. Physical and chemical characterizations are performed using a variety of analytical approaches including new techniques of x-ray absorption fine structure (XAFS) spectroscopy and x-ray absorption near-edge structure (XANES) deconvolution of these spectra to gather metal speciation information.

• Clinical and Experimental Reproductive Medicine
• /
• 제48권2호
• /
• pp.184-187
• /
• 2021

Radical trachelectomy is a fertility-preserving alternative to radical hysterectomy in carefully selected young women with early-stage cervical cancer. However, in cases with subsequent severe cervical stenosis, assisted reproductive techniques can be difficult. This is a case report of a 34-year-old patient who underwent robot-assisted radical trachelectomy and cerclage for early-stage (IB2) adenosquamous carcinoma. Three months after surgery, the patient underwent ovarian stimulation using a gonadotropin-releasing hormone antagonist protocol. As it was impossible to perform transcervical embryo transfer due to the almost complete absence of the cervical opening, transmyometrial embryo transfer under ultrasound guidance was performed. This resulted in a successful singleton pregnancy. This is the first case of successful pregnancy conceived by in vitro fertilization with transmyometrial embryo transfer in a patient who had previously undergone robot-assisted radical trachelectomy.

• 한국발생생물학회지:발생과생식
• /
• 제21권3호
• /
• pp.229-235
• /
• 2017

In the field of reproductive medicine, assessment of sperm motility is a key factor for achieving successful artificial insemination, in vitro fertilization, or intracellular sperm injection. In this study, the motility of boar sperms was estimated using real-time imaging via confocal microscopy. To confirm this confocal imaging method, flagellar beats and whiplash-like movement angles were compared between fresh and low-temperature-preserved ($17^{\circ}C$ for 24 h) porcine sperms. Low-temperature preservation reduced the number of flagellar beats from $11.0{\pm}2.3beats/s$ (fresh sperm) to $5.7{\pm}1.8beats/s$ and increased the flagellar bending angle from $19.8^{\circ}{\pm}13.8^{\circ}$ (fresh) to $30.6^{\circ}{\pm}15.6^{\circ}$. These data suggest that sperm activity can be assessed using confocal microscopy. The observed motility patterns could be used to develop a sperm evaluation index and automated confocal microscopic sperm motility analysis techniques.

• Journal of Plant Biotechnology
• /
• 제8권1호
• /
• pp.43-50
• /
• 2006

The goal of this research was to develop an efficient cryopreservation protocol for germplasms of yam (Diosorea batatas), that were cultivated in Korea. Comparative studies with four other cryogenic techniques and subsequent experiments for shoot regrowth were conducted. in vitro-grown shoot-apices of the D. batatas were successfully cryopreserved by encapsulation-dehydration. The maximum survival of shoot-apices could be achieved when the precultured (with 0.3 M of sucrose for one day) and encapsulated (with a 3%(w/v) Na-alginate solution) apices were dehydrated for $3.5{\sim}4\;h$ prior to direct immersion in LN (liquid nitrogen). The frequency of regrowth rate of cryopreserved apices was not decreased during 3-month storage period. The thawing method markedly affected survival of the cryopreserved apices, and thawing at $40^{\circ}C$ for 3 min produced the best results. When cryopreserved apices were post-cultured on the post-culture medium (MS), supplemented with $0.2mgl^{-1}$ of BA ($N_6$-benzyladenine) and $0.2mgl^{-1}$ of kinetin, they showed direct shooting without callusing.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.3-23
• /
• 2017

The achievement of tissue engineering can be highly depending on the capability to generate complicated, cell seeded three dimensional (3D) micro/nano-structures. So, various fabrication techniques that can be used to precisely design the architecture and topography of scaffolding materials will signify a key aspect of multi-functional tissue engineering. Previous methods for obtaining scaffolds based on top-down are often not satisfactory to produce complex micro/nano-structures due to the lack of control on scaffold architecture, porosity, and cellular interactions. However, a bioprinting method can be used to design sophisticated 3D tissue scaffolds that can be engineered to mimic the tissue architecture using computer aided approach. Also, in recent, the method has been modified and optimized to fabricate scaffolds using various natural biopolymers (collagen, alginate, and chitosan etc.). Variation of the topological structure and polymer concentration allowed tailoring the physical and biological properties of the scaffolds. In this presentation, the 3D bioprinting supplemented with a newly designed plasma treatment for attaining highly bioactive and functional scaffolds for tissue engineering applications will be introduced. Moreover, various in vivo and in vitro results will show that the fabricated scaffolds can carry out their structural and biological functionality.

• Journal of Microbiology
• /
• 제44권4호
• /
• pp.432-438
• /
• 2006

Twelve actinomycete strains were isolated from Egyptian soil. The isolated actinomycete strains were then screened with regard to their potential to generate antibiotics. The most potent of the producer strains was selected and identified. The cultural and physiological characteristics of the strain identified. the strain as a member of the genus Streptomyces. The nucleotide sequence of the 16S rRNA gene (1.5kb) of the most potent strain evidenced a 99% similarity with Streptomyces spp. and S. aureofaciens 16S rRNA genes, and the isolated strain was ultimately identified as Streptomyces sp. MAR01. The extraction of the fermentation broth of this strain resulted in the isolation of one major compound, which was active in vitro against gram-positive, gram-negative representatives and Candida albicans. The chemical structure of this bioactive compound was elucidated based on the spectroscopic data obtained from the application of MS, IR, UV, $^1H$ NMR, $^{13}C$ NMR, and elemental analysis techniques. Via comparison to the reference data in the relevant literature and in the database search, this antibiotic, which had a molecular formula of $C_{19}H_{29}NO_2$ and a molecular weight of 303.44, was determined to differ from those produced by this genus as well as the available known antibiotics. Therefore, this antibiotic was designated Meroparamycin.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.231-235
• /
• 2005

Most tissue engineering strategies for creating functional replacement tissues or organs rely on the application of temporary three-dimensional scaffolds to guide the proliferation and spread of seeded cells in vitro and in vivo. Scaffolds should be satisfied following requirements; macrostructure to promote cell proliferation, pore interconnectivity, pore size ranging from 200 to $400{\mu}m$, surface chemistry and mechanical properties. Rapid prototyping techniques have often been used as an useful process that fabricates scaffolds with complex structures. In this study, a new process to fabricate a three-dimensional scaffolds using bio-compatible polymer has been developed. It employs a highly accurate three-dimensional positioning system with pressure-controlled syringe to deposit biopolymer structures. The pressure-activated microsyringe is equipped with fine-bore nozzles of various inner-diameters. In order to examine relationships between line width and process parameters such as nozzle height, applied pressure, and speed of needle, experiments were carried out. Based on the experimental results, three-dimensional scaffold was fabricated using the apparatus. It shows the validity of the proposed process.

• 원예과학기술지
• /
• 제33권1호
• /
• pp.106-113
• /
• 2015

Effects of mineral salts (N, P, K, $Ca^{2+}$, $Mg^{2+}$, and $Fe^{3+}$) on the shoot growth and metabolite production of tea tree were studied using in vitro culture techniques. Among mineral s alts, ${H_2PO_4}^-$ was the most important for enhanced growth rate of tea tree, while $Mg^{2+}$ and $Ca^{2+}$ did not affect plant growth. Removal of ${NH_4}^+$ and $NO_3$ from the culture medium enhanced shoot multiplication compared to other treatments. Metabolite production was variable depending on mineral types and concentration. Removal of $Ca^{2+}$ decreased the production of caffeine; however, other treatments did not influence its production. $Ca^{2+}$, ${NH_4}^+$ and $Fe^{3+}$ were important factors for catechin production in tea tree. These results can be used as the basis for development of technical soil controls suitable for tea tree cultivation in the future.