• 터널과지하공간
• /
• 제6권2호
• /
• pp.131-143
• /
• 1996

In-situ survey and laboratory rock test were carried out for rating rock mass around the tunnel that some failures had been occurred in Danyang limestone quarry. For rating rock mass, several methods such as RMR, Q-system, rock strength etc. were applied. The stability analysis on tunnel was evaluated by numerical method FLAC. And The block theory using streographic projection was also applied for stability analysis. The 3-4 major discontinuity sets are distributed in rock mass around tunnel.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 암반역학위원회 학술세미나 논문집
• /
• pp.119-137
• /
• 2003

Electrical resistivity is one of physical property of the earth and measured by electrical resistivity survey, electrical resistivity logging and laboratory test. Recently, electrical resistivity Is widely used In determination of rock quality in road and railway tunnel design. To get more reliable rock quality data from electrical resistivity, it needs a lot of test and study on correlation of resistivity and rock quality. Firstly, we did rock property test In laboratory, such as uniaxial compressive strength(UCS), P wave velocity, Young's modulus and electrical resistivity. We correlate each test results and we found out that electrical resistivity has exponentially related to UCS and P wave velocity and linearly related to Young's modulus. And we accomplished electrical resistivity survey in field site and carried out electrical resistivity togging at In-situ area. Also we performed rock classification, such as RQD, RMR and Q-system and we correlate electrical resistivity to rock classification results. We found out that electrical resistivity logging data are highly correlate to RQD, Q and RMR. Also we found out that electrical resistivity survey data are lower than electrical resistivity logging data when there are faults or fractures. And it cause electrical resistivity survey data to lowly correlate to RQD, Q and RMR.

• 기술사
• /
• 제24권3호
• /
• pp.43-50
• /
• 1991

On the ground foundation works for Bldg site, Rock classification test can be obtained as follows due to the International Society for Rock Mechanics. 1. In-take test ; Compression strength, Point load test. 2. In-situ test : Schmidt hammer test. Burden test finaly the convinient co-relation table between strength and S.H. test were carried out for site-engineer. This project is one of contineous works regarding to Burden test from Jack leg drill( ø 36mm) to Crawler drill( ø 75mm) use.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권4호
• /
• pp.1-6
• /
• 2020

Recently, ex-situ remediation technologies has been emerging to clean up contaminated soils mainly because the in-situ techniques have limited applicability and technical difficulties in relatively small contaminated sites. Accordingly, implementation of off-site treatment and disposal have been continuously increased in soil remediation and restoration projects in Korea. However, in many cases, reclaimed soil is still not properly recycled or reused. Therefore, there is an urgent need to document the current status of soil management practices in soil remediation projects in the nation. This study presents a survey of soil contamination status and remedial approaches in Korea based on soil cleanup projects completed in 2015 - 2019, and proposes the possible options of the recycling or reusing the reclaimed soils under compliance with related regulations. The results of the soil survey showed soil contamination was most severe in gas stations, industrial facilities, and military areas. The major types of pollution were related to the petroleum-contaminated site (TPH and BTEX) with 77.0% occurrence in all the contaminated sites. The reclaimed soils were mostly reused as a ground filling-up soils in industrial facilities (60.0%) and warehouses (37.0%).

• Structural Engineering and Mechanics
• /
• 제42권5호
• /
• pp.609-629
• /
• 2012

This study deals with the assessment of low and mid rise multi-story buildings made of stone and /or brick, composite steel and masonry slabs from the sixties, known to be vulnerable to seismic hazard using the "vulnerability index" method based on buildings survey following Ain Temouchent (1999) and Boumerdes (2003) earthquakes, from where vulnerability curves are constructed using the translation method. The results obtained for the case study confirm what has been observed in situ.

• 방사성폐기물학회지
• /
• 제10권3호
• /
• pp.199-208
• /
• 2012

방사성폐기물처분을 위한 부지특성평가 기술 개발을 위해 지질특성조사와 수리지질특성조사가 1997년부터 지표기반 조사, 시추공 조사, 터널조사를 포함하여 수행되었다. 특히, 2006년에는 지하처분연구시설 (KURT, KAERI Underground Research Tunnel)을 건설하여 지하 환경에서 심부지질환경에 대한 연구 뿐 만 아니라 용질이동특성, 미생물특성, 공학적 방벽 시스템 연구 등 방사성폐기물처분을 위한 다양한 수행하고 있다. 본 연구는 한국원자력연구원내 건설된 지하처분연구시설 주변 지역을 연구지역으로 부지특성모델 구축의 일환으로 수행되었다. 연구지역의 지질모델구축을 위해 선형구조분석, 시추공/터널 조사, 지구물리탐사를 포함한 다양한 연구를 수행하여, 암질모델과 지질구조모델을 구축하였으며, 현장수리시험의 결과를 이용하여 암질모델과 지질구조모델을 포함한 지질모델에 입력된 요소에 대한 수리지질특성이 평가되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 3차
• /
• pp.3-10
• /
• 2010

Case study was carried out on the interpretation of the mechanical behavior of a severely damaged reinforced earth wall comprising geotextile with the concrete panel facing. In this part I, the outline of the damaged reinforced earth wall is in detail described. The background and cause of the damage are discussed based on the results of site investigation. The engineering properties of the fill were examined by performing various in-situ and laboratory tests, including the surface wave survey (SWS), PS-logging, RI-logging, soaking test, the direct shear box (DSB) test, bender element (BE) test, etc. The background as well as the cause for the damage of the wall may be described such that i) a considerable amount of settlement took place over a 3m thick weak soil layer in the lower part of the reinforced earth due to seepage of rainfall water, ii) the weight of the upper fill was partially supported by the geo-textile hooked on the concrete panels (n.b., named conveniently "hammock state" in this paper), and iii) the concrete panels to form the hammock were severely damaged by the unexpectedly large downwards compression force triggered by the tension force of the geotextile. The numerical simulation for the hammock state of the wall, together with counter-measures to re- stabilize the wall is subsequently described in Part II.

• 한국해양공학회지
• /
• 제24권3호
• /
• pp.72-78
• /
• 2010

This paper presents a design approach of driving system for tidal flat vehicle. Firstly, topographic and geological survey of tidal flat zone was accomplished. 'Anac' located in the west-south coast of South Korea was chosen for the survey area. From the survey, the basic design data such as distribution of gullies size and bearing pressure was obtained. To figure out the shape of driving system, numerical simulations were carried out. Through the numerical dynamic simulations using $Recurdyn^{TM}$, the performance of various concepts of driving system was analyzed. From the results, we propose the conceptual design with the functions: a) low contact pressure, b) powerful driving force transmission, c) adaptation to the ground undulation. To satisfy these functional requirements, the driving system adopts rubber tracks, sprockets, tires and suspensions. The static structural analysis of the frame structure was executed as well, from which the detailed design was drawn out. To validate the performance of the designed driving system, the test vehicle which has gasoline engine of 27HP and mechanical transmission was constructed. The driving tests of the vehicle were performed twice at the "Anac" area, and unveiled its capability.

• 화약ㆍ발파
• /
• 제19권3호
• /
• pp.91-104
• /
• 2001

As in Korean environments with mountainous and hilly areas, the rock generally has to be removed in construction or civil engineering work in tunnelling or excavation for development in urban area. Explosives should be used for blasting, which may cause serious problems on local people for their claim for compensation due to ground vibration, noise. For safe and economic blasting, geology and engineering characteristics of rocks such as discontinuities of rock or weathering are very important factors, together with site characteristics for prediction of ground vibration. In this study, conducted were the detailed study for major rocks most widely distributed in the South-east area, in-situ geological survey, geological and geochemical analysis, and further laboratory uniaxial rock stress, seismic velocity of core samples together with in-situ seismic velocity measurements. Regulations on ground vibration and noise were reviewed for assessing their adaptabilities, and a total of 4,856 measured blasting vibration data were examined for enhancing the confidence level in estimating the predictive formulation using scaled distance statistically.

• 환경영향평가
• /
• 제27권5호
• /
• pp.475-488
• /
• 2018

현재 도심 소하천의 식생조사는 주로 현장조사에 의존하여 이루어진다. UAV NIR(Unmanned Aerial Vehicle Near Infrared) 영상은 매우 낮은 고도에서 취득할 수 있어 도심 소하천과 같이 폭이 매우 좁은 표적(10m 내외)에 필요한 정보를 효율적으로 제공할 수 있다. 하지만 UAV NIR영상이 도심소하천의 식생 조사도구로서 검증되지 않아, UAV NIR 영상과 현장사진을 통합한 선행연구는 존재하지 않는다. 따라서 본 연구에서는 전통적인 원격탐사의 영역이 아니었던 국부적인 대상인 도심소하천 식생조사에서 UAV NIR 영상과 현장사진의 비교평가를 실시하였다. 하천 식생조사 결과를 실무에서 활용하는데 필요한 요구 사항을 고려하여 광역공간정보, 미시적인 정보 및 정량적인 데이터 확보 등 다양한 측면에서 분석이 수행되었다. UAV NIR 영상은 전통적인 현장조사에서 취득할 수 없었던 거시적인 주변 환경(예: 인공적인 토지 이용에 따른 영향)에 따른 식생군집패턴의 변화를 추적할 수 있었다. 현장조사는 전세계적으로 도심 소하천 식생 모니터링 방법으로 정착되었지만, 거시적인 정보의 취득에서 상당한 한계를 노출하였으며 정량적인 정보를 확보하는 과정에서도 신뢰성에 한계를 노출하였다. 본 연구가 도심 소하천의 식생조사에서 거시적이고 정량화되고 객관적인 데이터가 부재하여 직면하였던 한계를 극복할 수 있는 계기가 되어 향후 UAV NIR 원격탐사에서 확보할 수 있는 정보의 수준을 파악할 수 있는 중요한 참고자료가 될 수 있을 것으로 사료된다.