• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.2
• /
• pp.123-136
• /
• 1996

A three-dimensional Galerkin-FEM model which can handle the temporal and spatial variation of density is presented. The hydrostatic approximation is used and density effects are included by means of conservation equation of heat and the equation of state. The finite difference grids are used in the horizontal plane and a set of linear-shape functions is used for the vertical expansion. The similarity transform is introduced to solve resultant matrix equations. The proposed model was first applied to the density-driven circulation in an idealized basin in the presence of the heat exchange between the air and the sea. The advection terms in the momentum equation were ignored, while the convection terms were retained in the heat equation. Coefficients of the vertical eddy viscosity and diffusivity were fixed to be constant. Calculation in a non-rotating idealized basin shows that the difference in heat capacity with depth gives rise to the horizontal gradient of temperature. Consequently, there is a steady new in the upper layer in the direction of increasing depth with compensatory counter flow .in the lower layer. With Coriolis force, geostrophic flow was predominant due to the balance between the pressure gradient and the Coriolis force. As a test in region of irregular topography, the model is applied to the Yellow Sea. Although the resultant flow was very complex, the character of the flow Showed to be geostrophic on the whole.

• Composites Research
• /
• v.32 no.6
• /
• pp.395-402
• /
• 2019

The RFI process is an OoA process that fiber mats and resin films are laminated and cured in a vacuum bag. In case that resin film is insufficient to fill empty space in fibers, it makes void defect in composites and this void decrease mechanical properties of the composites. For this reason, non-destructive testing is usually used to evaluate void of manufactured composites. So, in this study, a manufacturing method of standard void specimens, which are able to be used as references in non-destructive testing, was proposed by controlling resin film thickness in the RFI process. Also, a fiber compaction test was proposed as a method to set the resin film thicknesses depending on target voids of manufacturing panels. The target void panels of 0%, 2%, and 4% were made by the proposed methods, and signal attenuation depending on void was measured by non-destructive testing and image analysis. In addition, voids of specimens for tensile, in-plane, short beam and compressive tests were estimated by signal attenuation, and mechanical properties were evaluated depending on the voids.

• Journal of Periodontal and Implant Science
• /
• v.26 no.2
• /
• pp.511-521
• /
• 1996

Periodontal pocket is one of the most frequently developed clinical feature on the teeth with periodontal disease. In order to determine the gingival curettage effect of intrapocket irradiation of a pulsed Nd : YAG laser on periodontally involved teeth, bilateral 60 teeth with $4{\sim}6mm$ in probing pocket depth 1 week after supragingival scaling were selected. On half of them the intrapocket irradiation($300{\mu}m$ fiber optic, 1.5W power, for 2min.) of a pulsed-Nd : YAG laser(EL.EN.EN06O, Italy) was applied as the lased group. On the contralateral 30 teeth the subgingival curettage was accomplished by Gracey curettes as the curattage group. The periodontal pocket tissues were surgically excised by the modified Widman flap technique immediately after the intrapocket irradiation or subgingival curettage, subsequently fixed with 10% neutral formalin, sectioned in $4{\sim}6{\mu}m$ thickness, and stained with hematoxylin-eosin. Surface characteristics and incomplete removal of the pocket epithelium were evaluated under light microscope. And the difference between the lased group and the curettage group was statistically analyzed by Chi-square test in Microstat program. The results were as follows ; 1. The plane surface was observed more frequently in the curettage group(73.3%) than in the lased group(23.3%), and the rough surface was observed more frequently in the lased grOoup(63.3%) than in the curettage group(6.7%)(p<0.05). 2. The rate of incomplete removal of the pocket epithelium was relatively high in both the lased group(76.6%) and the curettage group(86.6%), and there was no significant difference between the lased group and the curettage group(p>0.l). The results suggest that the further studies including various power control of laser should be succeeded in order to obtain more favorable results by the intrapocket irradiation of a pulsed Nd:YAG laser than the subgingival curettage with Gracey curettes.

• Advances in aircraft and spacecraft science
• /
• v.9 no.5
• /
• pp.415-431
• /
• 2022

Secondary flows have a huge impact on losses generation in modern low pressure gas turbines (LPTs). At design point, the interaction of the blade profile with the end-wall boundary layer is responsible for up to 40% of total losses. Therefore, predicting accurately the end-wall flow field in a LPT is extremely important in the industrial design phase. Since the inlet boundary layer profile is one of the factors which most affects the evolution of secondary flows, the first main objective of the present work is to investigate the impact of two different inlet conditions on the end-wall flow field of the T106A, a well known LPT cascade. The first condition, labeled in the paper as C1, is represented by uniform conditions at the inlet plane and the second, C2, by a flow characterized by a defined inlet boundary layer profile. The code used for the simulations is based on the Discontinuous Galerkin (DG) formulation and solves the Reynolds-averaged Navier-Stokes (RANS) equations coupled with the Spalart Allmaras turbulence model. Secondly, this work aims at estimating the influence of viscosity and turbulence on the T106A end-wall flow field. In order to do so, RANS results are compared with those obtained from an inviscid simulation with a prescribed inlet total pressure profile, which mimics a boundary layer. A comparison between C1 and C2 results highlights an influence of secondary flows on the flow field up to a significant distance from the end-wall. In particular, the C2 end-wall flow field appears to be characterized by greater over turning and under turning angles and higher total pressure losses. Furthermore, the C2 simulated flow field shows good agreement with experimental and numerical data available in literature. The C2 and inviscid Euler computed flow fields, although globally comparable, present evident differences. The cascade passage simulated with inviscid flow is mainly dominated by a single large and homogeneous vortex structure, less stretched in the spanwise direction and closer to the end-wall than vortical structures computed by compressible flow simulation. It is reasonable, then, asserting that for the chosen test case a great part of the secondary flows details is strongly dependent on viscous phenomena and turbulence.

• The Korean Journal of Mycology
• /
• v.29 no.1
• /
• pp.34-40
• /
• 2001

RAPD test and the observation of morphological, cultural characteristics of fourteen selected entomogenous fungi were conducted to investigate the analysis of their internal relationships. Paecilomyces tenuipes showed snow flower form attached to numerous white conidiophores, produced globular and semi-egg types on the club types of phialides. Cordyceps militaris formed globosely conidiophores, dark yellow fruiting body on pupa. The phialide as on Acremonium-type in global conidiophores. Beauveria bassiana covered with conidia was not formed fruiting body and adhered conidia on conidiophore of zigzag type. The PDA and SDAY medium were confirmed as an optimum growth of them. P. tenuipes showed to velvet and plane types in several media whereas C. militaris was belong to centrally raised and floccose in the morphological type. In contrast, B. bassiana covered with conidia on velvet shape. The size of amplified products were analyzed by RAPD using URP primer and were from 100 bp to 2.0 kb with $10{\sim}14$ geuomic DNA. Total similarities of two groups were by dendrogram of UPGMA analysis. The homology of P. tenuipes groups was 94.8 to 100%. It also showed 70.1 to 96.6% in C. militaris group and B. bassiana was higher similarity than any other. The internal change of C. militaris, produced telemorph fruiting body, was higher seperated in species than P. tenuipes and B. bassiana in the RAPD.

• The Journal of the Korea Contents Association
• /
• v.9 no.11
• /
• pp.407-415
• /
• 2009

In this research, to identify the degree of preference and participation in leisure sports, over 19-year-old adults living in the capital region were collected as subjects, and among them, 250 persons were chosen by purposive sampling method. Using SPSSWIN 16.0, I analyzed the collected data by reliability analysis, paired sample t-test, PPA(preference performance analysis) method. The conclusion is the following. First, the first quadrant showed wind surfing, skins-cuba, water-ski, and yacht, and as a result of this, it is necessary to improve the degree of participation in this field, the second quadrant showed golf, racketball snow board, ski, fishing, and climbing, and these field need to specific attention to maintain continuous attention, for they have a great deal of attendance, the third quadrant, showed water sleigh, cart, balloon, sky-diving, orienteering, hang gliding, model plane, and survival game. As the degree of preference and participation in these sports is low, it is recommended that more effort should be made for these sports. Finally, in the forth quadrant, there are tracking, mountain bike, inline skates, rafting, and cycling. As it's the participation is high, while that of preference is low, it is important to maintain the policy of the participation in leisure sports. Sencondly, the degree of preference and participation in leisure sport activicties acording to socio demographic characteristics differentiate.

• Journal of the Korean Data Analysis Society
• /
• v.20 no.6
• /
• pp.3155-3167
• /
• 2018

The purpose of this study was to investigate factor of principals' trust in teachers which principals of secondary school recognized and to explore their needs on building trust in teachers. For this purpose, this study used survey question of which investigated conception of principals' trust in teachers and performed with 296 secondary school principals. First, gap of two statuses was proven by t-test. Second, the order of priority was presented by Borich model. Third, the result of the locus for focus model was presented in the form of coordinate plane. Lastly, top priority and the second priority were determined. The result of this study was as following. 'Class management, instruction, and caring for students' category is highest in needs of secondary school principals on trust in teachers. Next, second priority category is 'partnership with parents'. It means secondary school principals recognize that students and parents are most important on education and their trust in teachers. Based on the review, finding and implications are discussed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.95-105
• /
• 2001

The present study was designed to compare morphological and structural relationships between basicranial measurements such as MCF angulation (Ar-SE-ptm), saddle angle (N-S-Ba, N-S-Ar) and facial structures including types of malocclusion. Twenty six children with Class III whose longitudinal headfilms were available from 7 to 12-year-old, and also 26 cross-sectional headfilms at each ages of 8, 9, 10 and 11 with Class I were selected for the investigation. Cephalometric measurements such as Ar-SE-ptm, N-S-Ba, N-S-Ar, N-SE-Ar, SNA, SNB, N-S/PM vert, CP/PM vert, $\underline{1}/FH$ plane, and $N-perp/\underline{1}$ were measured. Morphologic relationships and pattern of changes in facial structures in relation to the changes of MCF and saddle angle in both malocclusion types were analysed statistically employing ANOVA, t-test and Pearson correlation. Results suggest that the MCF rather than the saddle angle in children with Class I and III is more closely related with various facial structures and with their changes. It may be, therefore, suggested that the MCF be one of the biologically meaningful measurements in determining structural relationships between cranial base and facial complex including types of malocclusion. In addition, the MCF and its correlated facial structures in children with Class III, interestingly, showed somewhat marked changes between the ages of 9 and 11.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.2
• /
• pp.127-140
• /
• 2015

A fault is one of the critical factors that may lead to a possible ground collapse occurring in construction site. A fault core, however, possibly acting as a failure plane in whole fault zone, is composed of fractured rock and gouge nonuniformly distributed and thus can be characterized by its wide range of shear strength which is generally acquired by experimental method for stability analysis. In this study, we performed direct shear test and grain size distribution analysis for 62 fault core samples cropped from 12 different spots located in the vicinity of Kyongju and Ulsan, Korea. As a result, the range of shear strength representing the characteristics of fault cores in the study regions is determined with regard to vertical stress using a regression analysis for experiment data. The weight ratio of gravels in the samples is proportional to the shear strength and that of silt and clay is in inverse proportion to the shear strength. For most samples, the coefficient of determination is over 0.7 despite of inhomogeneity of them and consequently we determined the lower limit and upper limit of the shear strength with regard to the weight ratio by setting the confidence interval of 95%.

• Fire Science and Engineering
• /
• v.18 no.1
• /
• pp.24-30
• /
• 2004

In this work the dynamic heat transfer occurring in a cable penetration fire stop system built in the firewall of nuclear power plants is three-dimensionally investigated to develop a test-simulator that can be used to verify effectiveness of the sealants. Here was carried out an experiment to observe the heat transfer in the cable penetration fire stop system made of DOW CORNING products. The dynamic heat transfer occurring in the fire stop system is formulated in a parabolic partial differential equation subjected to a set of initial and boundary conditions. And it was modeled, simulated, and analyzed. The simulation results were illustrated in three-dimensional graphics and were compared with experimental data. Through the simulations, it was shown clearly that the temperature distribution was influenced very much by the number, position, and temperature of the cable streams. It also was found that the dynamic heat transfer through the cable streams was one of the most dominant factors, and the feature of heat conduction could be understood as an unsteady-state process. It is certain that these numerical results are useful for making a performance-based design for the cable penetration fire stop system.