• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권1호
• /
• pp.58-66
• /
• 2005

Inertial-grade vertical-type and lateral-type differential resonant accelerometers (DRXLs) are designed, fabricated using one process and tested for navigational applications. The accelerometers consist of an out-of-plane (for z-axis) accelerometer and in-plane (for x, y-axes) accelerometers. The sensing principle of the accelerometer is based on gap-sensitive electrostatic stiffness changing effect. It says that the natural frequency of the accelerometer can be changed according to an electrostatic force on the proof mass of the accelerometer. The out-of-plane resonant accelerometer shows bias stability of $2.5{\mu}g$, sensitivity of 70 Hz/g and bandwidth of 100 Hz at resonant frequency of 12 kHz. The in-plane resonant accelerometer shows bias stability of $5.2{\mu}g$, sensitivity of 128 Hz/g and bandwidth of 110 Hz at resonant frequency of 23.4 kHz. The measured performances of two accelerometers are suitable for an application of inertial navigation.

• Korean Journal of Crystallography
• /
• 제14권2호
• /
• pp.93-104
• /
• 2003

The crystals of group-Ⅲ nitride semiconductors with wurtzite structure exhibit a strong polarity. Especially, GaN has characteristics of different growth rate, anisotropic electrical and optical properties due to the polarity. In this work, GaN epilayer was grown and the polarities of the crystals were observed by the chemical wet etching and SP-EFM. GaN thin films were deposited on c-plane A1₂O₃ substrate under the variations of growth conditions by HVPE such as the deposition temperature of the buffer layer, the deposition time, the ratio of Group-V and Ⅲ and the deposition temperature of the film. The adquate results were obtained under the conditions of 500℃, 90 seconds, 1333 and 1080℃, respectively. It is observed that the GaN layer grown without the buffer layer has N-polarity and the GaN layer grown on the buffer layer has Ga-polarity. Fine crystal single particles were grown on c-plane A1₂O₃ and SiO₂, layer. The external shape of the crystal shows ｛10-11｝｛10-10｝(000-1) planes as expected in the PBC theory and anisotropic behavior along c-axis is obvious. As a result of etching on each plane, (000-1) and ｛10-11｝planes were etched strongly due to the N-polarity and ｛10-10｝ plane was not affected due to the non-polarity. In the case of the crystal grown on c-plane A1₂O₃, two types of crystals were grown. They were hexagonal pyramidal-shape with ｛10-11｝plane and hexagonal prism with basal plane. The latter might be grown by twin plane reentrant edge (TPRE) growth.

• Journal of the Korean Society of Industry Convergence
• /
• 제5권3호
• /
• pp.187-192
• /
• 2002

In-plane ESPI(Electronic Speckle Patten Interferometry)was devised to measure in~plane defamation and rotation of a specimen with laser in this study. The conventional measuring methods of surface deformations such as the strain gauge have many demerits because they are contact and point-to-point measuring ones. But that ESPI is noncontact, nondestructive and whole field measuring method can overcome previous disadvantages. We used ESPI which is sensitive to in-plane displacement for measuring in-plane deformations of a disk. First of all, the system calibration was done due to an in-plane rotation before getting deformations of a disk. Finally we showed good agreement between theexperiment results and those of the FEA(Finit Element Analysis).

• Structural Engineering and Mechanics
• /
• 제64권6권
• /
• pp.765-781
• /
• 2017

The out-of-plane response of infill walls has recently gained a growing attention and has been recognised fundamental in the damage assessment of reinforced concrete and steel framed buildings subjected to seismic loads. The observation of damage after earthquakes highlighted that out-of-plane collapse of masonry infills may occur even during seismic events of low or moderate intensity, causing both casualty risks and unfavourable situations affecting the overall structural response. Even though studies concerning the out-of-plane behaviour of infills are not as many as those focused on the in-plane response, in the last decades, a substantial number of researches have been carried out on the out-of-plane behaviour of infills. In this study, the out-of-plane response is investigated considering different aspects. First, damages observed after past earthquakes are examined, with the aim of identifying the main parameters involved and the most critical configurations. Secondly, the response recorded in about 150 experimental tests is deeply examined, focusing on the influence of geometrical characteristics, boundary conditions, prior in-plane damage, presence of reinforcing elements and openings. Finally, different theoretical capacity models and code provisions are discussed and compared, giving specific attention to those based on the arching theory. The reliability of some of these models is herein tested with reference to experimental results. The comparison between analytically predicted and experimental values allows to appreciate the extent of approximation of such methods.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제29권4호
• /
• pp.239-244
• /
• 2003

The common errors in preoperative treatment plan for the orthognathic surgery can be occurred during cast impression, cast mounting procedure with face-bow transfer, surgical stent fabrication, and so on. One of the most common errors exists during mounting process of the model on the articulator. Accurate mounting of dental casts to articulator should be achieved by transferring the 3-dimensional spatial relationship of the maxillary arch to an articulator. A face-bow is used for transfer this relationship to articulator, usually by relating the face-bow to a plane of reference of maxillary cast. The purpose of this study is evaluation of the accuracy of face-bow transferring of maxillary model to the articulator. The maxillary casts of thirty patients for orthognathic surgery were mounted on articulator with an face-bow instrument. The relationship of occlusal plane angle to Frankfort horizontal plane relations were compared the cephalogram with the cast-mounted articulator. As a result of this study, the significant difference between the maxillary occlusal planes angle in the cephalogram and articulator were found. The results were followed, 1. The mean occlusal plane angle in cast-mounted articulator was $13.5^{\circ}\;(SD{\pm}5.4)$. 2. The mean occlusal plane angle in cephalogram was $10.4^{\circ}\;(SD{\pm}4.3)$. 3. The mean difference of occlusal plane angle between cast-mounted articulator and cephalogram was $3.3^{\circ}\;(SD{\pm}4.6)$. According to the result, we should suggest that the occlusal plane angle to Frankfort plane in cast-mounted articulator is more steeper than that of cephalogram. And then, maxillofacial surgeon should try to get a more predictable result by suggesting the proper correction method and mounting the cast accurately.

• Proceedings of the KWS Conference
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.113-120
• /
• 2002

The effect of out-of-plane loads on the fatigue strength of welded steel structures is examined through fatigue tests with weldment of two fillet weld joint types. The results of the fatigue tests are compared with those under axial loads, on the basis of the hot spot stress range at the weld toe. From the result of the comparison, a method on how to incorporate the effect of the out-of-plane bending stress is proposed using design S-N curves derived from fatigue tests under the axial load. The proposed method is useful for rational assessment of the fatigue strength of fillet-welded structures, where combined stresses of the in-plane axial stress and the out-of-plane bending stress are induced simultaneously due to the complexity of applied loads and structural geometry.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2003년도 컴퓨터소사이어티 추계학술대회논문집
• /
• pp.157-160
• /
• 2003

Recently, several steganographic algorithms for two-color binary images have been proposed. In this paper, we propose a steganographic algorithm which embeds a secret message into bitmap images and palette-based images. To embed a message, the suggested algorithm divides a bitmap image into bit-plane images from LSB-plane to MSB-plane for each pixel, and considers each bit-plane image as a binary one. The algorithm splits each bit-plane image into m$\times$n blocks. and embeds a r-bit(r=[log$_2$(mn+1]-1) message into the block. And our schemes embed a message to every bit-plane from LSB to MSB to maximize the amount of embedded message and to minimize the degradation. The schemes change at most two pixels in each block. Therefore, the maximal color changes of the new algorithm are much smaller than other bit-plane embedding schemes' such as the substantial substitution schemes.

• Journal of Korea Multimedia Society
• /
• 제22권5호
• /
• pp.580-587
• /
• 2019

In this paper, a plane detection method using depth information is proposed. 3-D characteristics of a pixel are defined as a direction and length of a normal vector whose is calculated from a plane consisting of a local region centered on the pixel. Image coordinates of each pixel are transformed to 3-D coordinates in order to obtain the local planes. Regions of each plane are detected by calculating similarity of the 3-D characteristics. The similarity of the characteristics consists of direction and distance similarities of normal vectors. If the similarity of the characteristics between two adjacent pixels is enough high, the two pixels are regarded as consisting of same plane. Simulation results show that the proposed method using the depth picture is more accurate for detecting plane areas than the conventional method.

• International Journal of Korean Welding Society
• /
• 제2권1호
• /
• pp.33-39
• /
• 2002

The effect of out-of-plane loads on the fatigue strength of welded steel structures is examined through fatigue tests with weldment of two fillet weld joint types. The results of the fatigue tests are compared with those under axial loads, on the basis of the hot spot stress range at the weld toe. From the result of the comparison, a method on how to incorporate the effect of the out-of-plane bending stress is proposed using design S-N curves derived from fatigue tests under the axial load. The proposed method is useful for rational assessment of the fatigue strength of fillet-welded structures, where combined stresses of the in-plane axial stress and the out-of-plane bending stress are induced simultaneously due to the complexity of applied loads and structural geometry.

• The Journal of Korean Academy of Prosthodontics
• /
• 제32권4호
• /
• pp.565-572
• /
• 1994

According to the classification of dental arch form and the analysis of patterns of chewing movement, the patterns of chewing movement in each group were evaluated and compared with those of the normal group. Results were summarized as follows ; 1. Opening phase in chewing movement In the group which the maxillary second molar positionsbuccal side, the chewing patterns which have the Vertical Guide Openings in frontal plane, the Posterior Guide Openings in hjorizontal plane were observed. In the group which the maxillary premolars position lingual side, the chewing paterns which have the Protrusive Shift Openings in horizontal plane and sagittal plane were observed. 2. Closing phase in chewing movement. In each group except for the normal group, the chewing patterns which have the Concave Closure in frontal plane and in Horizontal plane were observed. In the group which the maxillary premolars position buccal side, the chewing patterns which have the Lateral Guide Closure in frontal plane and in horizontal plane, the Vertical Guide Closre in sagittal plane were observed: From the results, as the characteristics of the dental arch form have appeared in chewing movement, the close relationships were found between dental arch form and chewing movement. It is suggested that the evaluation of dental arch form is effective in the diagnosis of function of stomatognathic system.