• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.4
• /
• pp.523-532
• /
• 2001

A simultaneous measurement of wall vorticity and near-wall streamwise velocity fluctuations has been performed using a V-type wall vorticity probe and an I-type velocity probe to investigate the relation between them. Long-time averaged space-time correlations show that the wall vorticity is highly correlated with a turbulence structure which is tilted from the wall in the streamwise direction and that there is a streamwise vortex pair near the wall. It is shown that a structure correlated with the streamwise wall vorticity is smaller than and prior to a structure correlated with the spanwise wall vorticity. Tilting angles are obtained from the phase shift between the wall vorticity and streamwise velocity fluctuations. The tilting angle of the structure correlated with the streamwise wall vorticity is larger than that of the structure correlated with the spanwise wall vorticity. The convection velocity of the near-wall streamwise velocity fluctuations obtained from the space-time correlation is in good agreement with previous results.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.203-208
• /
• 1999

By tilting the reference mirror of Twynman-Green interferometer having a reference mirror and a moving mirror, firinge pattern composed of bright and dark parallel lines can be obtained and the fringe pattern is shifted according to the displacement of the mowing mirror. Several studies are executed for displacement measurement by detecting the intensity of the fringe with photo-diodes having small detecting area. In this study, to improve the sensitivity and robustness, the intensity of fringe is detected by using a large-area quadratic photo-diode masked with a grating panel having four kinds of binary grating having phase-difference of 0, {\pi}$/4, {\pi}$/2, 3 {\pi}$/4. The phase of the fringe is calculated with a simple 4-buckets algorithm. A experimental result shows that standard deviation of 5.653 nm is obtained comparing with a capacitive type gap sensor having nearly 1 nm accuracy.

• Applied Microscopy
• /
• v.34 no.2
• /
• pp.113-120
• /
• 2004

Microstructural characteristics of the Complex Perovskite (1-x) $(Li_{1/2}Sm_{1/2})TiO_3-x (Na_{1/2}Sm_{1/2})TiO_3$ (LNST) system have been investigated using the transmission electron microscopy (TEM). When $0.0{\leq}x{\leq}0.6$, the vacancy ordering forming the 1/2 (001) superlattice reflections due to the A-site cation deficiencies has apperaed. It could be confirmed by presence of ABPs. But it was difficult to form the vacancy ordering since vacancy concentration gradually lowered as the amount of the substituted Li ions decrease. Antiphase boundaries (APBs) were presented in microstructures of LNST when $0.8{\leq}x{\leq}1.0$. It was considered that these boundaries were caused by the 1:1 chemical ordering of A-site cations, Na and Sm ions. LNST had not only the antiphase tilting of oxygen octahedron but also the inphase tilting of oxygen octahedron and the antiparallel shift of cations all of them. It could be confirmed by presence of ferroelastic domains

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.1
• /
• pp.140-152
• /
• 1997

A simultaneous measurement of the wall skin friction and near-wall streamwise velocity fluctuations is performed using hot film and hot wire anemometers to investigate the relation between them. Near-wall turbulence statistics measured with a hot-wire probe are in good agreement with previous results. Turbulence properties of the wall skin friction fluctuations measured with a hot film also show fairly good agreements with those measured by others except that rms level is lower in the present study. Long-time averaged space- time correlations show that the wall skin friction is highly correlated with a turbulence structure which is tilted from the wall in the streamwise direction. Tilting angles are obtained from the phase shifts between the wall skin-friction and streamwise velocity fluctuations. The convection velocity of the near-wall streamwise velocity obtained from the space-time correlation is in good agreement with that from the direct numerical simulation database.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.1
• /
• pp.30-37
• /
• 2005

The microwave dielectric properties and their related structural characteristics in solid solutions of (1-$\chi$) Ba($Mg_{1/3}$Nb$_{2/3}$) $O_3$-$\chi$La(Mg$_{2/3}$Nb$_{1}$3) $O_3$(BLMN) have been investigated by measuring the dielectric constant($\varepsilon$r), Q value and temperature coefficient of resonant frequency($\tau$f) and by observing the crystal structure using high resolution transmission electron microscopy (HRTEM). Microwave dielectric properties showed characteristic features for specific composition. Dielectric constant($\varepsilon$$_{r}$) showed maximum value at the composition which corresponds to the phase boundary between 1 : 2 ordered and 1 : 1 ordered structure. The increase in $\varepsilon$$_{r}$ may be caused by the rattling of ions by incorporating smaller ions and the disordered structure. The variation of temperature coefficient of resonant frequency($\tau$$_{f}$) was investigated in terms of oxygen octahedra tilting.dra tilting.

• Journal of the korean society of oceanography
• /
• v.38 no.3
• /
• pp.122-134
• /
• 2003

Low-pass filtered time series of wind, coastal temperature, sea level and current were analyzed to understand the coastal upwelling processes in the southeast coast of Korea. Southerly winds favorable for coastal upwelling were dominant in summer of 1997. Total period of four major wind events amounts to 58 days during one hundred days from June to early September. Coastal temperature is most sensitive to variations of wind. The time lag between the onset of southerly (northerly) winds and decrease (increase) of temperature is 3-18 hours. In the frequency domain the coherent bands have periods of 2.4 and 4.0-5.4 days with respective phase lags of 17 and 27-37 hours. Despite the sensitive response, the magnitude of temperature change is not quantitatively proportional to the intensity or duration of the wind, because it depends on the degree of baroclinic tilting of isotherms built dynamically by the strong Tsushima Warm Current (TWC). Current is particularly strong near the coast and has a large vertical shear during the upwelling periods, which is associated with the baroclinic tilting. Both of current and sea level are poorly coherent with wind or temperature except for the period of 4 days.

• Physical Therapy Korea
• /
• v.26 no.4
• /
• pp.53-62
• /
• 2019

Background: Shoulder function is achieved by the coordinated movements of the scapula, humerus, and thoracic spine, and shoulder disorders can be associated with altered scapular kinematics. The trunk plays an important role as the kinematic chain during arm elevation. Objects: The purpose of this study was to determine the effects of thoracic hyperkyphosis on scapular orientation and trunk motion. Methods: Thirty-one subjects (15 in the ideal thorax group and 16 in the thoracic hyperkyphosis group) performed right-arm abduction and adduction movements in an unconstrained plane. The scapular orientation and trunk motion were recorded using a motion analysis system. Results: Those subjects with thoracic hyperkyphosis displayed greater scapular posterior tilting at a $120^{\circ}$ shoulder elevation, greater scapular internal rotation throughout the arm raising phase, and greater trunk axial rotation at the upper ranges of the shoulder elevation, compared to those subjects with an ideal thorax (p<.05). Conclusion: Thoracic hyperkyphosis can cause scapular instability, greater trunk rotation and greater scapular posterior tilting, and may contribute to preventing the achievement of a full range of humeral abductions in an unconstrained plane.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.738-743
• /
• 2004

The microwave dielectric properties and their related structural characteristics in solid solutions of (1-x) $Ba(Mg_{1/3}Nb_{2/3})O_3$ -x $La(Mg_{2/3}Nb_{1/3})O_3$ (BLMN) have been investigated by measuring the dielectric constant${\varepsilon}r)$, Q value and temperature coefficient of resonant frequency$({\tau}f)$ and by observing the crystal structure using high resolution transmission electron microscopy (HRTEM). Microwave dielectric properties showed characteristic features for specific composition. Dielectric constant$({\varepsilon}r)$ showed maximum value at the composition which corresponds to the phase boundary between 1:2 ordered and 1:1 ordered structure. The increase in ${\varepsilon}_r$ may be caused by the rattling of ions by incorporating smaller ions and the disordered structure. The variation of temperature coefficient of resonant frequency${{\tau}_f)$ was investigated in terms of oxygen octahedra tilting.

• Journal of Biomedical Engineering Research
• /
• v.13 no.3
• /
• pp.235-244
• /
• 1992

In this paper, fluttering behavior of mechanical monoleaflet tilting disc heart valve prostheses during the opening phase was analyzed taking into consideration the impact between the occluder and the guiding strut at the fully open position. The motion of the valve occluder was modeled as a rotating system, and equations were derived by employing the moment equilibrium principle. Forces due to lift, drag, gravity and buoyancy were considered as external forces acting on the occluder. The 4th order Runge-Kutta method was used to solve the governing equations. The results iimonstrated that the occludes reaches steady equilibrium position only after damped vibration. Fluttering frequency varies as a function of time after opening and is in the range of 8-84 Hz. Valve opening appears to be affected by the orientation of the valve relative to gravitational force. The opening velocities are in the range of 0.65-1.42m/sec and the dynamic loads by impact of the occludes and the strut are in the range of 90-190 N.

• Applied Microscopy
• /
• v.36 no.spc1
• /
• pp.1-7
• /
• 2006

The three-dimensional structure of an inorganic crystal, $SmZn_{0.67}Sb_2$ (space group $P4/nmm,\;a=4.30(3){\AA}\;and\;c= 10.27(1){\AA}$), was refined by electron crystallography utilizing high voltage electron microscopy (HVEM). Effects of instrumental resolution, image quality, beam damage and specimen tilting on the structure refinement have been evaluated. The instrumental resolution and image quality were the most important factors on the final results in the structure refinement, while the beam damage and specimen tilting effects could be experimentally minimized or controlled. The average phase errors $({\Phi}_{res})$ for the [001], [100] and [110] HVEM images of $SmZn_{0.67}Sb_2$ were $10.1^{\circ},\;9.6^{\circ}\;and\;6.8^{\circ}$, respectively. The atomic coordinates of $SmZn_{0.67}Sb_2$ were consistent within $0.0013{\AA}{\sim}0.0088{\AA}$, compared to the X-ray crystallography data for the same sample.