• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.2
• /
• pp.133-140
• /
• 2018

In this paper, we develop an automated software for in-plane structural analysis of composite laminated structures. The developed software supports various failure criteria and reports the analysis results considering user's convenience. It also provides batch job analysis function based on parallel processing technique. To verify the performance of the software, we compared margin of safety(MS) calculated in the software to those obtained from in-house method and the specimen experiment. As a result of comparisons, there was an error of less than 0.01 in the in-house method and it is within about ${\pm}10%$ with the specimen experiment. In addition, we confirmed the improvement of execution speed of batch job analysis based on parallel processing technique.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.3
• /
• pp.71-80
• /
• 2020

Before we develop LVAFoam, a CFD software for launch vehicle analysis, we conducted a survey on other CFD softwares. We looked at in-house code and commercial CFD software of other countries that were used as a simulation of launch vehicle's combustor, turbopump and external flow. This research included in-house code solvers, developed by NASA, Mississippi State University, DLR, Bertin Technologies, CNES, CERFACS, and JAXA as well as commercial CFD software from FLUENT, CFX, Advance/FrontFlow/red, GASP, CRUNCH CFD, CFD-ACE+, FINE^TM/Turbo, STAR-CCM+. The simulation cases of launch vehicle analysis from each commercial softwares and introduction of the LVAFoam were presented.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.17 no.4
• /
• pp.31-42
• /
• 2021

In the modern era, radio wave analysis is necessary for various fields of engineering, and interpretation of this is also indispensable. Self-driving cars need multiple different electronic components, and thus accurate and fast electromagnetic simulator for this kind of complex radio environment is required for self-driving simulations. Accordingly, the demand for self-driving simulators as well as existing electromagnetic analysis software has increased. This paper briefly describes the characteristics of numerical analysis techniques for electromagnetic analysis, self-driving simulation software, and conventional electromagnetic simulation software and also summarizes the characteristics of each software. Finally, the verification of the result from in-house code compared to HFSS is demonstrated.

• International Journal of Computer Science & Network Security
• /
• v.23 no.2
• /
• pp.65-78
• /
• 2023

Investigations on information security factors re- main elusive at small and medium enterprises (SMEs), es- specially for custom-made software solutions. This article aims to investigate, classify, adopt factors from recent literature addressing information security resources. SMEs al- ready have information security in place, but they are not easy to adopt through the negotiation processes between the in-house software development companies and custom-made software clients at SMEs. This article proposes a strategic framework for implementing the process of adoption of the information security factors at SMEs after conducting a systematic snapshot approach for investigating and classifying the resources. The systematic snapshot was conducted using a search strategy with inclusion and exclusion criteria to retain 128 final reviewed papers from a large number of papers within the period of 2001-2022. These papers were analyzed based on a classification schema including management, organizational, development, and environmental categories in software development lifecycle (SDLC) phases in order to define new security factors. The reviewed articles addressed research gaps, trends, and common covered evidence-based decisions based on the findings of the systematic mapping. Hence, this paper boosts the broader cooperation between in-house software development companies and their clients to elicit, customize, and adopt the factors based on clients' demands.

• Progress in Medical Physics
• /
• v.33 no.3
• /
• pp.25-35
• /
• 2022

Purpose: Planning for radiotherapy relies on implicit estimation of the probability of tumor control and the probability of complications in adjacent normal tissues for a given dose distribution. Methods: The aim of this pilot study was to reconstruct dose-volume histograms (DVHs) from text files generated by the Eclipse treatment planning system developed by Varian Medical Systems and to verify the integrity and accuracy of the dose statistics. Results: We further compared dose statistics for intensity-modulated radiotherapy of the head and neck between the Eclipse software and software developed in-house. The dose statistics data obtained from the Python software were consistent, with deviations from the Eclipse treatment planning system found to be within acceptable limits. Conclusions: The in-house software was able to provide indices of hotness and coldness for treatment planning and store statistical data generated by the software in Oracle databases. We believe the findings of this pilot study may lead to more accurate evaluations in planning for radiotherapy.

• Proceedings of the IEEK Conference
• /
• 2000.06c
• /
• pp.59-62
• /
• 2000

A software application builder has designed and partially implemented a E-Business software system using several reusable in-house software components. The builder finds an externally available third-party software components that satisfies solve desired functionality or behavior. We need systematic classification of the component from the domain. We propose a reference architecture of E-Business domain. It is used to search and reuse requiring components.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.39-41
• /
• 2004

This paper demonstrates the in-house development of the subsystem C&DH in a D-SAT satellite project of Astronautic Technology (M) Sdn. Bhd. (ATSB). D-SAT is a non-imaging satellite. It will carry a dosimeter as the payload for scientific objectives. Since one of the D-SAT project establishment intended objectives is to demonstrate the research and development skill of the ATSB engineers on the satellite system building, most of the subsystems of the D-SAT are developed in-house including the C&DH subsystem. C&DH subsystem plays an important role for managing data handling tasks and general operation of the satellite system. The C&DH development includes the research and study on the hardware and software design, the design of both the hardware and software, the development of the software system, the integration between the software and the hardware system and the implementation of the subsystem into the satellite system. This program allows ATSB to accomplish the engineers with expertise not only in the C&DH subsystem but other subsystems too besides developing knowledge in the management of a space project that covers not only on the technical issues but issues relating to the economic, political and legal issues.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.492-492
• /
• 2009

Nowadays in Republic of Korea, there is no distinct reference for the related design technology of rotor blade of wind turbine. Therefore the optimum design and evaluation of performance is carried out with foreign commercial code softwares. This paper shows in-house code software that evaluates the aerodynamic design of wind turbine rotor blade using blade element-momentum theory (BEMT) and processes that is applied through various aerodynamics theories such as momentum theory, blade element theory, prandtl's tip loss theory and strip theory. This paper presents the results of the numerical analysis such as distribution of aerodynamic properties and performance curves using in-house code POSEIDON.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.551-554
• /
• 2006

House management is very important in water resource protection in order to provide sustainable drinking water for about four millions population in northern Taiwan. House management can be a simple job that can be done without any ingredient of remote sensing or geographic information systems. Remote sensing and GIS integration for house management can provide more efficient management prescription when land use enforcement, soil and water conservation, sewage management, garbage collection, and reforestation have to be managed simultaneously. The objective of this paper was to integrate remote sensing and GIS to manage houses in a water resource protection district. More than four thousand houses have been surveyed and created as a house data base. Site map of every single house and very detail information consisting of address, ownership, date of creation, building materials, acreages floor by floor, parcel information, and types of house condition. Some houses have their photos in different directions. One house has its own card consists these information and these attributes were created into a house data base. Site maps of all houses were created with the same coordinates system as parcel maps, topographic maps, sewage maps, and city planning maps. Visual Basic.NET, Visual C#.NET have been implemented to develop computer programs for house information inquiry and maps overlay among house maps and other GIS map layers. Remote sensing techniques have been implemented to generate the background information of a single house in the past 15 years. Digital orthophoto maps at a scale of 1:5000 overlay with house site maps are very useful in determination of a house was there or not for a given year. Satellite images if their resolutions good enough are also very useful in this type of daily government operations. The developed house management systems can work with commercial GIS software such as ArcView and ArcPad. Remote sensing provided image information of a single house whether it was there or not in a given year. GIS provided overlay and inquiry functions to automatically extract attributes of a given house by ownership, address, and so on when certain house management prescriptions have to be made by government agency. File format is the key component that makes remote sensing and GIS integration smoothly. The developed house management systems are user friendly and can be modified to meet needs encountered in a single task of a government technician.

• Journal of Internet Computing and Services
• /
• v.23 no.2
• /
• pp.37-44
• /
• 2022

With the outbreak of COVID-19, non-face-to-face activities such as remote learning and telecommuting have increased rapidly. As a result, the number of people staying at home and the number of hours spent inside the house have also increased since the pandemic. Our team had previously worked on methods for detecting abnormal conditions in a person's health in various circumstances within the house by converging single sensor-based algorithms. In our previous research, we installed IoT sensors indoors to detect people emergency situations requiring aids, the scope of detection was limited to indoor space due to the limitation in sensors. In this study, we have come up with a system that integrates our previous study with a new method for detecting abnormal conditions in outdoor environments using outdoor security cameras and wearable devices. The proposed system enables users to be notified of emergency situations in both indoor and outdoor areas and respond to them as quickly as possible.