• 지질공학
• /
• 제17권3호
• /
• pp.455-469
• /
• 2007

연구지역인 경상북도 경주시 봉길리 지역은 백악기 퇴적암을 기반암으로 제3기의 화성암과 암맥들이 관입하여 분포한다. 이 지역에 대한 단열의 발달 특성을 이해하기 위하여 비교적 균질하고 신선한 제3기 화강암에 대한 격자분석을 통하여 단열발달사와 단열밀도 분포에 대한 연구를 실시하였다. 단열군들은 북서-남동방향의 연성 전단띠 (set a) ${\to}$ 북북서-남남동 방향의 인장단열 (set d) ${\to}$ 서북서-동남동 방향의 인장 또는 정단층성 단열 (set b) ${\to}$ 북동-남서 방향의 우수향 주향이동성 단열 (set c) ${\to}$ 서북서-동남동 방향의 정단층이 재활성된 역단층성 단열 (set e)의 순서로 발달되었음이 인지되었으며, 북서-남동방향의 연성 전단띠 (set a)는 이후에 좌수향으로 취성의 재활성 운동을 겪었음을 보여 준다. 서로 다른 암상에 대한 단열 밀도분석 결과는 단열의 밀도가 암석의 생성시기보다는 암석의 물성에 더 강하게 영향을 받는 것으로 나타났으며, 같은 암상에서의 단열밀도는 단층손상대에서 급격하게 증가함을 보여주었다. 또한 이러한 단열밀도의 변화는 암상의 차이와 관입접촉부를 따른 단층운동뿐만 아니라 암맥의 관입시의 냉각에 의한 절리의 형성에도 일부 원인이 있을 것으로 해석된다. 그러나 그 원인에 상관없이 이러한 단열의 증가는 유체의 유동에 좋은 통로의 역할을 하게 되어 이를 따른 유체의 유동뿐만 아니라 이에 포함된 원소의 이동에도 매우 중요한 기여를 할 것으로 생각된다.

• 한국측량학회지
• /
• 제25권3호
• /
• pp.257-266
• /
• 2007

적조에 관한 조사는 육안과 샘플링에 의한 현지조사에 의해 일반적으로 진행되고 있다. 이와 같은 기존의 조사, 분석방법은 적조의 발생과 소멸까지의 경로를 정확하게 예측하기 곤란하였다. 이에 좀더 객관적이고 과학적인 방법으로 적조의 발생과 그 이동경로 등 시 공간적인 환경인자를 분석해 볼 필요성이 대두되고 있다. 본 연구에서는 지리정보시스템을 적용하여 적조의 공간특성을 분석하고자 Arc/Info를 활용하여 자료를 구축한 후 적조발생해역에서의 적조밀도분포를 추정하기 위해 IDW 보간법을 적용하였다. 그 후 GRID 모듈의 CON 및 SUM Function을 이용하여 밀도 1,000cells/ml이상 발생된 해역을 추출하였으며, 추출된 해역을 기준으로 날짜별로 밀도를 누적하였다. 본 연구를 통하여 적조가 발생되는 해역을 지리정보시스템에 의해 적조의 분포 현황을 시 공간적으로 판단할 수 있었으며, 적조발생지의 공간별 밀도와 누적빈도를 GIS를 적용하여 분석한 결과 최대밀도 발생해역과 최대 빈도 발생해역 모두 남해도 남면일대 해역으로서 최대 누적빈도는 49회임을 알 수 있었다. 이를 근거로 차 후 발생되는 적조발생해역에 대한 자료의 보완이 이뤄질 경우 적조 발생과 소멸까지의 이동경로를 예측 할 수 있으리라 판단된다.

• 상하수도학회지
• /
• 제13권3호
• /
• pp.73-82
• /
• 1999

In this study, the optimal analysis for pipe network is performed for the combined ideal pipe network system(CASE 1, CASE 2 and CASE 3) which is composed of 25 nodes, 41 elements, and 1 fixed nodal head with evaluating pressure variation distribution of main and branch in grid composed drainage pipe network. The linear analysis technique used as the analysis method in this study, the KYPIPE being used extensively as the linear technique to design and analysis of pipe network is applied. Firstly, in the analysis of pipe network, the CASE 2 and CASE 3 supply same thing(value) in the result of considering the total flow provided each pipeline, but in the general intension in the case of CASE 2, relative width of supply is more large than CASE 1 and CASE 3. Secondly, in the analysis technique of pipe network, CASE 3 is analysed largest as a result of comparing with same heads, and in the order of their size CASE 2 and CASE 1 were determined but the difference doesn't appear to be obvious. Thirdly, as the result of determining main factor, pressure in the design and analysis of net work. CASE 3 is from Node 3 to 25 than CASE 1 and CASE 2 and it is determined in the order of their size, CASE 2 and CASE 1. Finally, in this study, discharge flow distribution is evaluated in the same condition with 3-type CASE in the case of branch position for designing optimal composed drainage pipe network. As the result of that, branch pipe perform. Therefore, it is thought that the efficient and reasonable management of water supply and sewerage design will be possible if it give all our energies to study at the pipe system design in and out of country in the future.

• 한국해양공학회지
• /
• 제21권6호
• /
• pp.72-80
• /
• 2007

The tsunami that resulted from the Central East sea Earthquake, which registered 7.7 on the Richter scale, that occurred over the entire water region in Akita on May. 26, 1983 and the tsunami that was triggered by the Southwest off Hokkaido Earthquake (7.8 on the Richter scale) that occurred in Southwest off Hokkaido on July 12, 1993 are representative cases that led to considerable damage in life and property, not only in Japan but also in Korea. In this study, multi-grid method was used in order to reproduce sufficiently the shoaling effect that occurs as water depth becomes shallow in the shallow water region and moving boundary condition was introduced to consider the runup in the coastal region. For the tsunamis that exerted considerable effect on the East Sea coast of Korea that were caused by the Central East Sea Earthquake in 1983 and the Southwest off Hokkaido Earthquake in 1993, characteristics like water level rise and propagation in the East Sea coast will be examined using numerical simulations. At the same time, these values will be compared with observed values. In addition, maximum water level rise and change in the water level with respect to time that were caused by the tsunamis were examined at each location along the East sea coast. Usefulness of numerical analysis was verified by comparing with observed values.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.36.1-36.1
• /
• 2010

While the substrate-type solar cells with Cu(In,Ga)Se2 absorbers yield conversion efficiencies of up 20%[1], the highest published efficiency of Cu(In,Ga)Se2 superstrate solar cell is only 12.8% [2]. The commerciallized Cu(In,Ga)Se2 solar cells are made in the substrate configuration having the stacking sequence of substrate (soda lime glass)/back contact (molybdenum)/absorber layer (Cu(In,Ga)Se2)/buffer layer (cadmium sulfide)/window layer (transparent conductive oxide)/anti reflection layer (MgF2) /grid contact. Thus, it is not possible to illuminate the substrate-type cell through the glass substrate. Rather, it is necessary to illuminate from the opposite side which requires an elaborate transparent encapsulation. In contrast to that, the configuration of superstrate solar cell allows the illumination through the glass substrate. This saves the expensive transparent encapsulation. Usually, the high quality Cu(In,Ga)Se2 absorber requires a high deposition temperature over 550C. Therefore, the front contact should be thermally stable in the temperature range to realize a successful superstrate-type solar cell. In this study, it was tried to make a decent superstrate-type solar cell with the thermally stable ZnO:Al layer obtained by adjusting its deposition parameters in magnetron sputtering process. The effect of deposition condition of the layer on the cell performance will be discussed together with hall measurement results and current-voltage characteristics of the cells.

• 환경영향평가
• /
• 제15권1호
• /
• pp.23-33
• /
• 2006

The factor of air pollution in a large industrial city is not only manufactories but also, activities related to trucks. Sihwa National Industrial Complex is located in Siheung City; due to the industries, more diverse activities related to trucks occur in Siheung City than other cities. In particular, the new residential area in Siheung City is close to the industrial complex; so, the damage of this residential area is expected that it would be more serious and vulnerable than other areas. The aim of this study is to analyze influence of the air pollution by a truck in Siheung City. ISCST3 Model and Arc View program were used for this study and Siheung City was divided into 1,000 meter by 1,000 meter grid to analyze. Furthermore, this study suggested two reduction controls of air pollution in Siheung City, and analyzed the results from these reduction managements. The results of the present condition showed that residences located in north of Sihwa Industrial Complex are influenced by air pollution material. Furthermore, air pollution by trucks has affected on the residents which is near the road in Siheung City. Therefore, this study suggested two reduction controls by the Traffic System Management. The first alternative plan is setting the truck traffic limitation zone in the road that is located in south of resident areas and many trucks traffic. Next, the second alternative plan is setting freight truck way on the most traffic road to enter the industrial complex. The reduction effect of the first alternative is good on the residential area. And, the second alternate about freight truck way is divided passenger cars into trucks. Therefore, there are increase of average speed and decrease of average concentration, and spatial reduction effects found in wide areas.

• 한국태양에너지학회 논문집
• /
• 제34권4호
• /
• pp.23-29
• /
• 2014

Recently, in power system studies, Multiple Energy Carriers (MECs) such as Energy Hub has been broadly utilized in power system planners and operators. Particularly, Energy Hub performs one of the most important role as the intermediate in implementing the MECs. However, it still needs to be put under examination in both modeling and operating concerns. For instance, a probabilistic optimization model is treated by a robust global optimization technique such as multi-agent genetic algorithm (MAGA) which can support the online economic dispatch of MECs. MAGA also reduces the inevitable uncertainty caused by the integration of selected input energy carriers. However, MAGA only considers current state of the integration of selected input energy carriers in conjunctive with the condition of smart grid environments for decision making in Energy Hub. Thus, in this paper, we propose an immune algorithm based Multiple Energy Carriers System which can adopt the learning process in order to make a self decision making in Energy Hub. In particular, the proposed immune algorithm considers the previous state, the current state, and the future state of the selected input energy carriers in order to predict the next decision making of Energy Hub based on the probabilistic optimization model. The below figure shows the proposed immune algorithm based Multiple Energy Carriers System. Finally, we will compare the online economic dispatch of MECs of two algorithms such as MAGA and immune algorithm based MECs by using Real Time Digital Simulator (RTDS).

• International Journal of Fluid Machinery and Systems
• /
• 제6권4호
• /
• pp.200-205
• /
• 2013

In order to investigate the characteristics of unsteady flow in a mixed flow pump guide vane under the small flow conditions, several indicator points in a mixed flow pump guide vane was set, the three-dimensional unsteady turbulence numerical value of the mixed flow pump which is in the whole flow field will be calculated by means of the large eddy simulation (LES), sub-grid scale model and sliding mesh technology. The experimental results suggest that the large eddy simulation can estimate the positive slope characteristic of head & capacity curve. And the calculation results show that the pressure fluctuation coefficients of the middle section in guide vane inlet will decrease firstly and then increase. In guide vane outlet, the pressure fluctuation coefficients of section will be approximately axially symmetrical distribution. The pressure fluctuation minimum of section in guide vane inlet is above the middle location of the guide vane suction surface, and the pressure fluctuation minimum of section in which located the middle and outlet of guide vane. When it is under the small flow operating condition, the eddy scale of guide vane is larger, and the pressure fluctuation of the channel in guide vane being cyclical fluctuations obviously which leads to the area of eddy expanding to the whole channel from the suction side. The middle of the guide vane suction surface of the minimum amplitude pressure fluctuation to which the vortex core of eddy scale whose direction of fluid's rotation is the same to impeller in the guide vane adhere.

• 한국농림기상학회지
• /
• 제17권4호
• /
• pp.275-280
• /
• 2015

미래 기후조건에서 농업부문 가뭄양상을 전망하기 위해 우리나라 농업의 중심지인 전주지역을 대상으로 1951-2100 기간의 기후변화시나리오(RCP8.5) 일자료를 이용하여 토양의 물수지에 근거한 농업가뭄지수를 계산하였다. 계산결과는 과거(1951-1980), 현재(1981-2010), 그리고 3개의 미래 기후학적 평년기간(2011-2040, 2041-2070, 2071-2100)으로 분류하여 분석하였다. 그 결과 과거부터 현재까지 계절적으로 가장 부족한 이른봄의 토양수분은 점차 개선되어 금세기말이면 수분부족현상이 해소될 것으로 전망되며, 봄철 가뭄발생빈도 역시 지금보다 줄어들어 이른봄에는 가뭄이 거의 나타나지 않을 것이다. 반면 여름작물 생육기간에는 토양수분상태가 악화되며 가뭄발생빈도가 대체로 증가할 것으로 전망되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.55.2-55.2
• /
• 2011

The final site of offshore wind power plant should be decided by comprehensive examination of various conditions such as wind resource, sea depth, geology, grid connection, social circumstance and environmental issue. Wind condition is typically regarded as the most important factor because wind energy increases in proportion to wind velocity and it directly relates to the amount of power output, efficiency of power plant and profitability. Advanced countries in the offshore wind power sector such as Denmark, UK and Germany, they are analyzing wind resource accurately by installing the meteorological mast in the ocean in order to get the optimal type of wind turbine and maximum generation efficiency. Also, it is made much of designing offshore power plant on the basis of actual measurement by met-mast and those wind farms have a chance to get the loan with reduced interest rate in project financing. In Korea, the HEMOSU-1 is installed in the ocean around Wido island to analyze wind resource of test bed of 100MW offshore wind power on october last year. This paper deals with the design and construction procedure of the first met-mast in Korea and also shows the site characteristics of test bed. Therefore, this paper will give useful information to local governments and private business sector who are trying to construct offshore wind farm and it can also be a good reference for the following projects of meteorological mast in near future.