• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.199-202
• /
• 1996

In this paper, we used the maximum likelihood method for 2-point aerodynamic model to determine the parameters of the ChangGong-91. Since the estimation from the flight test of real aircraft is the most reliable, we performed the flight test of ChangGong-91 to get the parameters such as velocity, height, 3 axis acceleration, 3 axis angular rate, pitch angle, angle of attack, temperature and so on. We recorded the flight test data in S-VHS tapes and stored them to personal computer using A/D(analog to digital) converter. Flight test was done in stall motion, and the acquired data was be processed with parameter identification method.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.3
• /
• pp.33-49
• /
• 2014

The object of this study is to verify the effects of job stress on burnout and job satisfaction of flight attendants and to confirm the difference in the effect on the consciousness of full service carrier and low cost carriers' flight attendants. In order to confirm, the study examines the relationship between job stress, burnout, and job satisfaction of airline cabin attendant. A survey was done for 55days from January 5th 2014 on flight attendants and total 200 valid samples were analysed. The results of the study demonstrated significant relationship and difference in job stress, burnout and job satisfaction of flight attendants between full service carrier and low cost carrier. As a result, the study is significant as it satisfaction between divergent airline work environment.

• Journal of Aerospace System Engineering
• /
• v.7 no.2
• /
• pp.15-22
• /
• 2013

The conformity of propulsion system need to be evaluated thorough the flight test because it is an important part of the airplane to ensure the flight safety. In the small airplane development, the flight test according to KAS(Korean Airworthiness Standards) Part 23 is one of the ways to verify compliance in terms of satisfactory aircraft/engine/propeller integration. This thesis introduces means of verifying the compliance and test requirement of KAS Part 23 for the conformity of the propulsion system in small airplane. It also describes procedures and methods of propulsion system flight test through KC-100 airplane project.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.27 no.4
• /
• pp.73-82
• /
• 2019

In order to achieve successful flight training results, various studies on pilot aptitude have been conducted. In this study, we examined the aptitude for the pilots using the teacher aptitude test tool. As a result, the student pilots showed a high aptitude score suitable for conducting aviation training, and the A-type personality type was overwhelmingly large. The study satisfaction of student pilots was classified into educational contents, educational methods, educational environment and facilities, and flight instructors using the questionnaire related to the satisfaction of learning. As a result, the satisfaction of flight instructor among four factors was found to be a major factor in improving flight performance.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.3
• /
• pp.57-62
• /
• 2012

In this study, changes depending on the Airparks for LSA(Light Sport Aircraft) and Ultralight vehicle flight restricted areas, the flight route for LSA in Korea was redesigned. Considerations for LSA operating limits of VFR and complex airspace conditions in Korea, and that links the Airparks for LSA is to redesign the proposed.

• Journal of Advanced Navigation Technology
• /
• v.27 no.2
• /
• pp.155-161
• /
• 2023

Vertigo refers to a state in which awareness related to the location, posture, movement, etc. of a helicopter is insufficient in space. It is easy to fall into flight illusion when flying in dense fog or night flight, and even if it has a wide field of view, it can be caused by visual causes such as cloud shapes, wind conditions, conditions of ground objects, and sensory causes such as changes in air posture or gravitational acceleration. The design and program of the motion system are studied that applied a six-axis motion system to a conventional commercial flight simulator program for pilot training, depending on the specificity of helicopter flight training that requires perception and sensitivity. Using the motion-based helicopter simulator produced in this study to train pilots, it is expected to have a positive effect in prevent of vertigo, where high performance could not be confirmed in the previously used visual-based simulation training device.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.10
• /
• pp.927-932
• /
• 2007

The sophisticated mathematical model is required for the design and the database construction of the advanced flight control system of UAV. In this paper, flight test of KARI's research UAV, often called DURUMI-II, is implemented for the data acquisition from the maneuver flight. The flight path reconstruction is implemented to ensure that the measured data is consistent and error free. The nonlinear system identification for the refined mathematical modeling is implemented with the verified measurements from the flight path reconstruction. The simulation with the identified results have a good validation when the simulated responses were compared to the flight tested data.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.891-896
• /
• 2007

This paper contained the flight test calibration for the airspeed indicator and the altimeter of the light airplane ChangGong-91, which is the first type certified aircraft from Korean Ministry of Construction and Transportation, as a part of the flight test validation. The flight test for airspeed position error calibration was performed using tower fly by method in order to calibrate swivel head testboom which is attached to the right wing tip of the airplane, and using system to system method for airspeed indicator. The altimeter calibration was calculated using flight test data for airspeed calibration. The flight test was conducted at the basis of the 'Korean Airworthiness Standard' regulation of Korean Ministry of Construction and Transportation.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.2
• /
• pp.16-26
• /
• 2014

After the GBAS ground system installing at the airport, a GBAS ground and flight testing must be conducted to verify functionality and performance of the system. Since Korea has no experience of the GBAS ground system installation, GBAS test and evaluation methods have never been studied so far. Therefore this paper analyzes the test items and methods for the GBAS ground and flight testing based on ICAO documents, FAA flight inspection manual and testing reports of other countries. As a result of the analysis, this paper proposes the GBAS ground and flight testing items in korea, also describes the flight procedures for the GBAS flight testing.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.4
• /
• pp.21-29
• /
• 2010

The main purpose of this study is to obtain linear models for the design of automatic flight controller in order to operate the Light Sport Aircraft as unmanned air vehicle. Flight test equipments installed on the aircraft to acquire flight test data are described and maneuvers for practical speed calibration are introduced. Parameters for the linear models of lateral and longitudinal motion are estimated by the Output error method as well as trim data analysis using the flight test data. Simulated data using the estimated parameters is shown to agree well with the measurement data. Estimated parameters obtained for several flight conditions can be used to improve the aerodynamic database of the simulation program.