• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.6
• /
• pp.461-469
• /
• 2017

A segment of the wave board has been expressed as a submerged line segment in the two dimensional wave flume. The lower end of the line segment could be extended to the bottom of the wave flume and the other opposite upper end of the board could be extended to the free surface. It is assumed that the motion of the wave board could be defined by the sinusoidal motion in horizontal direction on either end of the wave board. When the amplitude of sinusoidal motion of the wave board on lower and upper end are equal, the wave board motion could express the horizontally oscillating submerged segment of piston type wave generator. The submerged segment of flap type wave generator also could be expressed by taking the motion amplitude differently for the either end of the board. The pivot point of the segment motion could play a role of hinge point of the flap type wave generator. Simplified analytic solution of oscillating submerged wave board segment in water of finite depth has been derived through the first order perturbation method at two dimensional domain. The case study of the analytic solution has been carried out and it is found out that the solution could be utilized for the design of wave generator with arbitrary shape by linear superposition.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.3 no.2
• /
• pp.33-42
• /
• 1996

The portion of the recycled paper and paper board packaging material has been the highest in recycled municipal solid waste since 1960 but still the portion of the discarded paper and paper board packaging material is the highest (32.3%) in whole discarded municipal solid waste in USA. In order to reduce more the discarded paper and paper board, the common municipal solid waste treatments were compared and recycling treatment was still recommended for the the discarded paper and paper board rather than of the waste treatments, landfill, incineration, and source reduction. In this paper, the obstacled of recycling treatment of the paper and paper board in municipal solid waste and new application of recycled paper and paper board packaging material are discussed.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.3
• /
• pp.17-25
• /
• 1994

This study was carried out to compare the properties of Com-Ply Boards with those of OSBs. These two kinds of boards were made of same flakes. Com-Ply Boards were covered with three different thickness veneers, such as 4mm, 3mm, and 2.5mm. All manufactured Com-Ply Boards and OSBs were 12mm thick. In MOR, all Com-Ply Boards were higher than OSB, and especially 3mm-veneer and 2.5mm-veneer Com-Ply Board were highest. But OSB showed 420kg/$cm^2$. 3mm-veneer Com-Ply Board showed the highest internal bonding 7.0kg/$cm^2$ and then 2.5mm-veneer showed 6.8kg/$cm^2$, and OSB showed 6.6kg/$cm^2$. Screw holding strength showed the high value 23.9kg/$cm^2$, 25.5kg/$cm^2$, and 29.3kg/$cm^2$ respectively at 3mm-veneer, 2.5mm-veneer Com-Ply Board and OSB. Thickness swelling of Com-Ply Boards was lower than that of OSB, but Water absorption of OSB was lower. Finally it was very encouraging that all properties of OSB without veneer, whose cost is higher than flake and whose properties is better, were not worse than those of Com-Ply Board with veneer. It seems That more researches on OSB will be required.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.1
• /
• pp.17-26
• /
• 1996

This research was accomplished to evaluate possibility of using paper sludge for the raw materials of wood based panel products. The experimental panels were manufactured by four mixed ratios, the proportion of paper sludge to wood particle: 20:80, 30:70, 40:60, 50:50% (oven dry weight basis) and by three composition types, sludge-particle mixed board, three layered sludge-particle board and three layered particle board. They were tested mechanical (bending strength and internal bond) and physical properties (water absorption, thickness swelling and linear expansion). From the results they were shown that bending strength of mixed and three layered sludge-particle board were decreased with increasing of composition ratios of sludge. And the mechanical and physical properties of the boards of three layered composition types have superior to those of mixed composition type. Although composition ratios of sludge increased, the internal bond strength and dimensional stability of sludge-particle board not decreased quantitatively. We concluded that the mechanical and physical properties of three layered sludge-particle board were similar w those of three layered particle-board (control) made by our laboratory design. Therefore, it was recognized that paper sludge can be used as potential raw material in particle-board manufacturing industry.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.3
• /
• pp.47-58
• /
• 2001

For finding both ways of recycling the wood and plastic wastes and solving the problem of free formaldehyde gas emission through manufacturing wood particle-polypropylene fiber composite board without addition of formaldehyde-based thermosetting resin adhesive, control particleboards and nonwoven web composite boards from wood particle and polypropylene fiber formulation of 50 : 50, 60 : 40, and 70 : 30 were manufactured at density levels of 0.5, 0.6, 0.7, and 0.8 g/$cm^3$, and were tested both in the physical and mechanical properties according to ASTM D 1037-93. In the physical properties, control particleboard had significantly higher moisture content than composite board. In composite board, moisture content decreased with the increase of target density only in the board with higher content of polypropylene fiber and also appeared to increase with the increase of wood particle content at a given target density. Control particleboard showed significantly greater water absorption than composite board and its water absorption decreased with the increase of target density. In composite board, water absorption decreased with the increase of target density at a given formulation but increased with the increase of wood particle content at a given target density. After 2 and 24 hours immersion, control particleboard was significantly higher in thickness swelling than composite board and its thickness swelling increased with the increase of target density. In composite board, thickness swelling did not vary significantly with the target density at a given formulation but its thickness swelling increased as wood particle content increased at a given target density. Static bending MOR and MOE under dry and wet conditions increased with the increase of target density at a given formulation of wood particle and polypropylene fiber. Especially, the MOR and MOE under wet condition were considerably larger in composite board than in control particleboard. In general, composite board showed superior bending strength properties to control particleboard, And the composite board made from wood particle and polypropylene fiber formulation of 50 : 50 at target density of 0.8 g/$cm^3$ exhibited the greatest bending strength properties. Though problems in uniform mixing and strong binding of wood particle with polypropylene fiber are unavoidable due to their extremely different shape and polarity, wood particle-polypropylene fiber composite boards with higher performance, as a potential substitute for the commercial particleboards, could be made just by controlling processing variables.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.135-142
• /
• 2012

DSRC system is a communication system that consists of road side equipment and on board equipment to provide services of communication technology for intelligent transportation systems. In this paper, we carry out a short-range dedicated high-speed wireless communications via DSRC system based on board equipment that is installed in the vehicle and road side equipment through wireless channels of communication. on board equipment is system that have a memory which initialization information is stored, it loads physical layer and MAC layer, LLC layer, L7 layer in turn. In the upper, it should analyze the various commands that are sent from roadside base stations, and carry out the operation which is in accordance with the command. and also it designs the structure of protocol stack which is TRM Layer loaded that is to initialize on L7 layer and MAC layer and efficiently designs operation between on board equipment and the road side equipment.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.4 s.112
• /
• pp.38-43
• /
• 2005

Natural Com Starch(NCS) spray system has been widely used In multiply board mill for the better bonding strength between board layers. However the unsuitable NCS spray system could lead to a drop in plybond efficiency of multiply board. It could also result in the accumulation of unretained-starch in the white water system, which could not only rise in BOD and COD level but also reduce the effects of rosin-alum sizing system and other additives. In this study, the simple and rapid method by UV-spectroscopy for measuring the starch contents in the white water was proposed, and the quantitative analysis for dissolved starch content in white water was carried out in two kinds of board production process. It could be confirmed that about 150 ppm of oxidized starch was retained in white water dewatered from undertop ply of multiply board process, and about 470 ppm of natural starch was dissolved in white water originated from unsuitable spraying system in the multiply board production lines for cup base paper.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.3
• /
• pp.270-276
• /
• 2013

The educational process and result of onboard training should be evaluated according to the 1995 Amendments to the International Convention on Standards of Training, Certification and Watch-keeping for seafarers(STCW), 1978. In particular, the revised Convention requires that a trainee's seagoing service must be recorded in each cadet's Training Record Book approved by the maritime administration responsible for the issuance of certificates of competency. Trainees for certification under regulation III/1 of the STCW Convention are required to complete an approved on-board training programme. The purpose of this paper is to understand the compliance of the education for an approved on-board training programme. The questionnaire was distributed among 110 cadets being trained on board the training ship of the maritime college of the Mokpo National Maritime University. In this study, we conducted the questionnaire survey which is related to the on-board training programme such as marine engineering; controlling the operation of the ship and care for persons on board; electrical, electronic and control engineering; etc. The survey revealed that onboard training program was normally satisfactory, however, lack of practical training tools and time have accounted for most of the reasons for dissatisfaction. Therefore, it is our goal to enhance the satisfactory value of onboard training education by analyzing the reason of the dissatisfaction.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.6
• /
• pp.61-71
• /
• 2020

The study examines the impact of corporate governance mechanisms, such as board characteristics on corporate social responsibility disclosure (CSRD). The data on CSRD items and board characteristics have been collected by content analysis of the annual reports of 30 publicly-listed banks in Bangladesh covering six years, from 2013 to 2018. More specifically, the directors' report, the chairman's statement, notes to the financial statement and CSR disclosure reports included in annual reports were used to collect the CSRD data. The empirical analysis applies the ordinary least square and the generalized method of moments. The results of the study have revealed that board size, board independence, female board member, and foreign directors have a significant positive impact on CSRD. By contrast, political directors and audit committee size have a negative impact on CSRD. Interestingly, accounting experts on boards ensure more CSRD as they curb the influence of politicians on the board. Thus, it is better to increase accounting experts and decrease politicians on the board. These findings provide valuable insights into the process of forming a suitable CSR policy by connecting the efforts of the board, government, and regulatory bodies to enhance the performance of banks to CSR as well as to CSRD.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.1
• /
• pp.179-185
• /
• 2021

The aim of this study is to examine the impact of board of directors' activity on the audit committee's effectiveness score among manufactured listed companies on Saudi Stock Exchange (Tadawul) for the period 2015-2017. The final sample of this study consists of 195 firm-year observations that represent manufactured companies listed on Saudi Stock Exchange (Tadawul) for the years 2015-2017. The data of this study in terms of board of directors' meetings, audit committee size and meetings, firm leverage, firm performance, and firm age were hand-collected from the annual reports of the considered companies. The Pooled OLS regression's result indicate that audit committee's effectiveness score is influenced by the board of directors' activity. This result gives support to the agency theory prediction. This result is also consistent with the complementary function of corporate governance mechanisms in which board of directors' activity complements the function of audit committee's effectiveness score. The result of this study should be useful for manufacturing companies, Saudi Stock Exchange, auditors, and regulators which relates to the association between board of directors' activity and audit committee's effectiveness score. This study provides a new empirical evidence on the impact of board activity on the audit committee's effectiveness score in an interesting context which is Saudi Arabia.