• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.73-78
• /
• 2002

In WATM networks, in order to perform dynamic slot allocation required slots of mobile terminals are estimated based on DP (Dynamic Parameter) reflecting characteristics of traffic. In VBR (Variable Bit Rate) traffic, slot allocation is done at MT considering both time-dependent characteristics and QoS (Quality of Service) requirements. In this paper, DPs-buffer state information and buffer state change-are transmitted through in-band signaling. BS (Base Station) performs dynamic slot allocation considering traffic characteristics of each MT (Mobile Terminal), in other words, buffer state information informs the potentiality of 'buffer full state'to BS if MT buffer is over the specific threshold value and buffer state change notifies change in buffer state of incoming cells to MT. If buffer state information is equal to 'low (more than threshold)' and 'abrupt increase' it generates 'buffer full' state cell transmission delay or cell loss might occur. At this time BS should assign additional slots to MT, and then MT consumes cells in its buffer. In simulation, the proposed scheme shows better performance in cell delay and loss than EPSA (Estimation-Prorated Slot Assignment) in-band scheme.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.6
• /
• pp.671-678
• /
• 2014

This paper presents a Ka-band FMCW sensor that has high linearity by improving a nonlinear behavior of the voltage controlled oscillator. Due to the nonlinear characteristics of the voltage controlled oscillator for the conventional method, the drift of beat frequency can cause inaccuracy and errors to the extracted results. A Ka-band FMCW signal with fast transition time could be generated by using both direct digital synthesizer and phase locked loop in this research. The implemented FMCW sensor showed very high accuracy in beat frequency through the test.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.853-862
• /
• 2019

In this paper, we designed a 4.5kW X-band SSPA transmitter to replace the TWTA search radar transmitter with low MTBF and high maintenance cost. The transmitter is designed for the performance of over 520W average transmission output and 4.0kW maximum transmission output. In particular, by implementing a graceful degradation, it is designed to maintain better performance than conventional TWTA transmitter up to 40% (13 assembly modules) failure level of 200W power amplifier assembly. Through an experiment on the effective range of X-band, the performance of proposed transmitter verified the values of the maximum transmission output 6.1kW, spurious output 69.16dBc, RF pulse rising time 15.2ns and RF pulse falling time 16.3ns. The experiment confirmed the change of output power according to the graceful degradation due to fault injection.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.161-167
• /
• 2014

This paper presents the results of permittivities of various materials by measurements of the dielectric properties for the materials in millimeter-wave band. Since the advantages of millimeter wave band include the miniaturization, weight reduction of component and a lot of information transfer, its study has received increasing attention of researches. Also, because of the characteristics of the band have the superior straightness and the small diffractive, in the band, the analysis for the reflection and transmission characteristics of the materials will be very important. Moreover, a low interference is one of characteristics of the band due to the fact that the millimeter wave is absorbed in the materials. Therefore, in this paper, the reflection and transmission characteristics of materials are measured in the band by using the free space method. Based on the presented result, the permittivities of the materials are derived by the calculation of Nicolson-Ross Weir method.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.3-6
• /
• 2004

This paper. we investigate the OFDM-based wireless LAN systems operating in the 60 GHz frequency band as part of the fourth-generation (4G) systems. The 60 GHz band is of much interest since this is the band in which a massive amount of spectral space (5 GHz) has been allocated worldwide for dense wireless local communications. This paper gives an overview of 60 GHz indoor wireless channel characteristics and an effect on phase noise. The performance of OFDM system is severely degraded by the local oscillator phase noise, which causes both common phase error and inter-carrier interference. We provide the exact analysis of the phase noise effect on the OFDM system.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.63-65
• /
• 2018

This paper presents a DTC-PWM(Direct Torque Control-Pluse Width Modulation) method of PMSM(Permanent Magnet Synchronous Motor) using the flux-torque hysteresis band. In order to keep the flux and torque error of the PMSM within the hysteresis band, the optimal PWM duty ratio is calculated by the error of the flux and torque with the flux and torque vector of the selected voltage vector. According to the flux duty ratios and the torque duty ratios, the optimized duty ratio to reduce the errors is selected by the calculated duty ratios. In the proposed method, the selected voltage vector is divided into d-q axis components with a simple method. And the flux duty ratios and torque duty ratios are estimated by the applied voltage vector. The proposed DTC-PWM for PMSM was verified by computer simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.359-365
• /
• 1998

The portable two way radio telephone amongst GMDSS equipment in the vessel is very important portable wireless one for search and rescue in distress situation. Although the portable two way radio telephone must be equipped with in the vessel by IMO & RR, other kinds of wireless tranceivers are widely used to communicate with crew members who are separately appointed at bridge forecastle and poop in leaving or arriving at the port, passing through a narrow canal or voyaging in the foggy weather, Most of those wireless tranceivers except portable two way radio telephone are allocated at 27MHz band with PTT simplex system that makes crew members difficult to work effectively in the vessel. In this research 900MHz band FDD(frequency duplex division) tranceiver system is studied to help crew members in the vessel to communicate with themselves freely and to work easily meanwhile with simple operation. 900MHz band FDD tranceiver system uses one chip FM frontend IC to realize the miniaturization and downsizing of tranceiver and small size head set attached to helmet. The credibility of this research's result is highly evaluated by circuit analysis with computer aided simulation, and partly modified 900MHz band cordless phone circuit.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.05a
• /
• pp.365-370
• /
• 1998

The portable two way radio telephone amongst GMDSS equipment in the vessel is very important portable wireless one for search and rescue in distress situation. Although the portable two way radio telephone must be equipped with in the vessel by IMO RR, other kinds of wireless tranceivers are widely used to communicate with crew members who are separately appointed at bridge forecastle and poop in leaving or arriving at the port, passing through a narrow canal or voyaging in the foggy weather. Most of those wireless tranceivers except portable two way radio telephone are allocated at 27MHz band with PTT simplex system that makes crew members difficult to work effectively in the vessel. In this research 900MHz band FDD(frequency duplex division) tranceiver system is studied to help crew members in the vessel to communicate with themselves freely and to work easily meanwhile with simple operation. 900MHz band FDD tranceiver system uses one chip FM frontend IC to realize the miniaturization and downsizing of tranceiver and small size head set attached to helmet. The credibility of this research's result is highly evaluated by circuit analysis with computer aided simulation. and partly modified 900MHz band cordless phone circuit.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.1
• /
• pp.48-58
• /
• 2012

New digital predistortion technique is proposed for power amplifier linearization in multi-band transmission systems. We consider a system where muli-band signals are combined and amplified by a single power amplifier (PA). In this system, the PA output is distorted by the nonlinear cross-products between different band signals as well as their own nonlinear self-products. To compensate these nonlinear effects, we propose a multiple PD structure. Each PD removes the nonlinear cross-products and self-products to mitigate the spectral regrowth for the corresponding band. Since the PD parameters for different bands are linked together, it is difficult to find the PD parameters separately. Thus, we propose an iterative method for finding the PD parameters jointly. For demonstration of the proposed method, multi-band characteristics of PA are extracted from a commercial power amplifier. Computer simulation was executed based on the PA parameters. The simulation results show that the proposed method can effectively linearize the PA and remove spectral regrowth at each signal band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1214-1219
• /
• 2010

In this paper, a software radio system, supporting the physical layer of IEEE 802.15.4 standard, has been developed using USRP(Universal Software Radio Peripheral) board and GNU Radio package of an open source development kit for software radio. The software radio system supports the standards of BPSK and OQPSK modulations for 868/915 MHz band and OQPSK modulation for 2.45 GHz band. To verify the operation of the developed system, it has been tested under the standard signals according to the frequency band and packet structures for the transmitting and receiving operation. At 2.4 GHz, the Smart RF EV board and CC2430 modules are used to check the proper operation of the software radio system. The system performance test shows that the emission power spectrum, the eye-pattern, and PER(Packet Error Rate) meet the standard. It has been confirmed that the developed system supports the PHY layer of IEEE 802.15.4.