• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.7-9
• /
• 2011

In December 2002, International Maritime Organization (IMO) has adopted the Resolution MSA.137(76) Standards for the Ship Maneuverability. For applying the standards, we have to estimate and evaluate the Maneuverability of a ship at the design stage in difference of trim and displacement as accurate as possible. In this paper, the effect of loading condition on the ship Maneuverability was investigated through 3 methods : numerical simulation, free running model ship and real ship data.. Firstly, We carried out numerical simulation, free running model ship experiments and real ship experiments at ballast condition, half loaded condition and full loaded condition with difference of trim.. Secondly, by comparing these results of 3 methods, we draw out the trend of ship Maneuverability due to the change of trim and displacement of a ship.

• Journal of Technology Innovation
• /
• v.6 no.2
• /
• pp.54-79
• /
• 1998

Entering the 1990s, Korean economies experienced the high-cost and low-efficiency situation which evetually caused many Korean firms led to relocate their production facilities to lower labor cost countries. This paper aims to draw out the characteristics of FDI and to evaluate the impacts of FDI in manufacturing sectors. Firstly, we try to categorize the indutries into three groups, labor intensive, capital intensive, and the technology intensive industries figuring out the characteristics of FDI of Korean firms. Secondly, we compare the three categories by grouping high and low foreign investment areas using value added data. Thirdly, we analyse the impacts of foreign production relocation the number of firms, production volume and jobs creation in Korea during the period 1991-1996. This paper concludes that the FDI of Korean firms concentrates to labor intensive industry and the hollowing effect caused by FDI was observed partially in the labor intensive industry.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.11
• /
• pp.1949-1955
• /
• 2010

This paper describes the characteristic and effectiveness of combined GIL transmission line through lightning surge analysis. In addition the XLPE cable is analyzed in the same condition to compare with GIL. Lighting surge analysis is carried out by EMTP/ATP-Draw to obtain overvoltage of GIL and XLPE cable at service-point and load-out area of underground line. Propagation velocity is calculated in combined transmission lines with GIL and XLPE cable. The overvoltage is also analyzed on GIL and XLPE cable with or without arrester operation. The Analysis results show that overvoltage of GIL is occurred higher than XLPE cable at the same condition. Therefore it is evaluated that the application of GIL at the field should be considered cautiously when more detailed transient analysis, another electrical testes and economic evaluations are implemented.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.1
• /
• pp.93-100
• /
• 2021

Forward osmosis (FO) process is a chemical potential driven process, where highly concentrated draw solution (DS) is used to take water through semi-permeable membrane from feed solution (FS) with lower concentration. Recently, commercial FO membrane modules have been developed so that full-scale FO process can be applied to seawater desalination or water reuse. In order to design a real-scale FO plant, the performance prediction of FO membrane modules installed in the plant is essential. Especially, the flux prediction is the most important task because the amount of diluted draw solution and concentrate solution flowing out of FO modules can be expected from the flux. Through a previous study, a theoretical based FO module model to predict flux was developed. However it needs an intensive numerical calculation work and a fitting process to reflect a complex module geometry. The idea of this work is to introduce deep learning to predict flux of FO membrane modules using 116 experimental data set, which include six input variables (flow rate, pressure, and ion concentration of DS and FS) and one output variable (flux). The procedure of optimizing a deep learning model to minimize prediction error and overfitting problem was developed and tested. The optimized deep learning model (error of 3.87%) was found to predict flux better than the theoretical based FO module model (error of 10.13%) in the data set which were not used in machine learning.

• Textile Coloration and Finishing
• /
• v.18 no.3 s.88
• /
• pp.42-48
• /
• 2006

The aim of this work is to develop Thick-Thin polyester yarn(T-T yarn) with finer than 1 denier mono filament. The manufacture of T-T yarns were carried out in a draw-winder using 85d/72f PET filament with various spinning speed of 2700, 2900, and 3100 m/min, respectively. The structure and physical properties of T-T yarns with spinning speed and over feed ratio were examined by draw-winder processing the sample in $100^{\circ}C$ water for 20 min and drying in 120, 140, 160, and $180^{\circ}C$ of dry air for 20 min. The crystallinity, the birefringence and the initial elasticity modulus of T-T yarns increased with increased spinning speed of filament and the heat treatment temperature but at the temperatures higher than $140^{\circ}C$ the increased rates show a tendency to decrease. Moreover, the initial modulus and the tenacity of T-T yarns increased with decreasing the over feed ratio of filament and the those of T-T yarns decreases with increasing the heat treatment temperature. The shrinkage of T-T yarns decreased with decreasing spinning speed and increased over feed ratio of filaments. Consequently, the results indicate that the best T-T yarn under 1 denier was optimized from PET filament with spinning speed of 2700 m/min and over feed ratio of 0.67

• Educational Technology International
• /
• v.23 no.1
• /
• pp.1-39
• /
• 2022

We study emotion regulation in a distant CABLe (Collaborative Argumentation Based-Learning) setting at university. We analyze how students achieve the group task of synthesizing the literature on a topic through scientific argumentation on the institutional Moodle's forum. Distinguishing anticipatory from reactive emotional regulation shows how essential it is to establish and maintain a constructive working climate in order to make the best out of disagreement both on social and cognitive planes. We operationalize the analysis of anticipatory emotional regulation through an analytical grid applied to the data of two groups of students facing similar disagreement. Thanks to sharp anticipatory regulation, group 1 solved the conflict both on the social and the cognitive plane, while group 2 had to call out for external regulation by the teacher, stuck in a cyclically resurfacing dispute. While the institutional digital environment did afford anticipatory emotional regulation, reactive emotional regulation rather occurred through complementary informal and synchronous communication tools. Based on these qualitative case studies, we draw recommendations for fostering distant CABLe at university.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.13-22
• /
• 2023

Recently, global luxury fashion brands such as Gucci, Saint Laurent, and Louis Vuitton have been showing special interest in Korean contemporary artists and actively collaborating with them. This can be said to be a new change that is distinguished from previous collaborations of fashion brands. Therefore, this study investigated the cases of collaboration between global luxury fashion brands and Korean contemporary artists, and analyzed the types and characteristics to examine the trends and characteristics and draw meaning. As a result, fashion brands combine the characteristics of Korean art works of various genres with the brand concept and pursued values to create new sensibility and high value-added products. It can be seen that the intention was to prepare a place to draw out. In addition, it was found that collaboration was also utilized in terms of marketing so that domestic customers could visit the brand store with a sense of familiarity by utilizing Korea's artistic and cultural sentiments. Based on the results of this study, we intend to provide basic data for the development of creative contents for various collaborations between fashion and art that can help develop the modern fashion industry.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.3
• /
• pp.271-278
• /
• 2016

Recently, reverse osmosis (RO) is the most common process for seawater desalination. A common problem in both RO and thermal processes is the high energy requirements for seawater desalination. The one energy saving method when utilizing the osmotic power is utilizing pressure retarded osmosis (PRO) process. The PRO process can be used to operate hydro turbines for electrical power production or can be used directly to supplement the energy required for RO desalination system. This study was carried out to evaluate the performance of both single-stage PRO process and two-stage PRO process using RO concentrate for a draw solution and RO permeate for a feed solution. The major results, were found that increase of the draw and feed solution flowrate lead to increase of the production of power density and water permeate. Also, comparison between CDCF and CDDF configuration showed that the CDDF was better than CDCF for stable operation of PRO process. In addition, power density of two-stage PRO was lower than the one of single-stage. However, net power of two-stage PRO was higher than the one of single-stage PRO.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.8
• /
• pp.194-202
• /
• 2002

Die design of bonnet drawing is composed of upper die, lower die and blank holder. It has been performed by checked and re-design method, which cause economic and financial loss. Nowadays, CAD/CAM system is excellent, but application is low. Therefore, in specific item, drawing die of bonnet outer draw by 3-D lay-out. In this study purpose, Bonnet drawing die is designed rapidly, correctly. It's method that shape modify to resemble. This purpose lead to 3-D Lay-Out. It is to react the standard die. In rule relation, input data change all of the shape.

• Journal of Korean Society of Rural Planning
• /
• v.10 no.1 s.22
• /
• pp.27-33
• /
• 2004

The objective of this study is to propose the whole idealistical process for ecological area zoning based on the natural environment analysis. In order to draw out the ecological zoning, this study used the remote sensing, GIS method and field survey. As a result of this study showed that it was helpful in establishing development direction of Midong Mountain, minimizing the impact on environment by drawing out a development suitable land based on the objective standards and data and also preventing the misconduct development in advance.