• Journal of Pharmaceutical Investigation
• /
• 제30권3호
• /
• pp.191-199
• /
• 2000

Genomics is providing targets faster than we can validate them and combinatorial chemistry is providing new chemical entities faster than we can screen them. Historically, the drug discovery cascade has been established as a sequential process initiated with a potency screening against a selected biological target. In this sequential process, pharmacokinetics was often regarded as a low-throughput activity. Typically, limited pharmacokinetics studies would be conducted prior to acceptance of a compound for safety evaluation and, as a result, compounds often failed to reach a clinical testing due to unfavorable pharmacokinetic characteristics. A new paradigm in drug discovery has emerged in which the entire sample collection is rapidly screened using robotized high-throughput assays at the outset of the program. Higher-throughput pharmacokinetics (HTPK) is being achieved through introduction of new techniques, including automation for sample preparation and new experimental approaches. A number of in vitro and in vivo methods are being developed for the HTPK. In vitro studies, in which many cell lines are used to screen absorption and metabolism, are generally faster than in vivo screening, and, in this sense, in vitro screening is often considered as a real HTPK. Despite the elegance of the in vitro models, however, in vivo screenings are always essential for the final confirmation. Among these in vivo methods, cassette dosing technique, is believed the methods that is applicable in the screening of pharmacokinetics of many compounds at a time. The widespread use of liquid chromatography (LC) interfaced to mass spectrometry (MS) or tandem mass spectrometry (MS/MS) allowed the feasibility of the cassette dosing technique. Another approach to increase the throughput of in vivo screening of pharmacokinetics is to reduce the number of sample analysis. Two common approaches are used for this purpose. First, samples from identical study designs but that contain different drug candidate can be pooled to produce single set of samples, thus, reducing sample to be analyzed. Second, for a single test compound, serial plasma samples can be pooled to produce a single composite sample for analysis. In this review, we validated the issue whether the second method can be applied to practical screening of in vivo pharmacokinetics using data from seven of our previous bioequivalence studies. For a given drug, equally spaced serial plasma samples were pooled to achieve a 'Pooled Concentration' for the drug. An area under the plasma drug concentration-time curve (AUC) was then calculated theoretically using the pooled concentration and the predicted AUC value was statistically compared with the traditionally calculated AUC value. The comparison revealed that the sample pooling method generated reasonably accurate AUC values when compared with those obtained by the traditional approach. It is especially noteworthy that the accuracy was obtained by the analysis of only one sample instead of analyses of a number of samples that necessitates a significant man-power and time. Thus, we propose the sample pooling method as an alternative to in vivo pharmacokinetic approach in the selection potential lead(s) from combinatorial libraries.

• The Journal of Advanced Prosthodontics
• /
• 제4권3호
• /
• pp.162-169
• /
• 2012

PURPOSE. Fracture of the veneering material of zirconia restorations frequently occurs in clinical situations. The purpose of this in vitro study was to compare the fracture strengths of zirconia crowns veneered with various ceramic materials by various techniques. MATERIALS AND METHODS. A 1.2 mm, $360^{\circ}$ chamfer preparation and occlusal reduction of 2 mm were performed on a first mandibular molar, and 45 model dies were fabricated in a titanium alloy by CAD/CAM system. Forty-five zirconia copings were fabricated and divided into three groups. In the first group (LT) zirconia copings were veneered with feldspathic porcelain by the layering technique. In the second group (HT) the glass ceramic was heat-pressed on the zirconia coping, and for the third group (ST) a CAD/CAM-fabricated high-strength anatomically shaped veneering cap was sintered onto the zirconia coping. All crowns were cemented onto their titanium dies with Rely $X^{TM}$ Unicem (3M ESPE) and loaded with a universal testing machine (Instron 5583) until failure. The mean fracture values were compared by an one-way ANOVA and a multiple comparison post-hoc test (${\alpha}$= 0.05). Scanning electron microscope was used to investigate the fractured interface. RESULTS. Mean fracture load and standard deviation was $4263.8{\pm}1110.8$ N for Group LT, $5070.8{\pm}1016.4$ for Group HT and $6242.0{\pm}1759.5$ N for Group ST. The values of Group ST were significantly higher than those of the other groups. CONCLUSION. Zirconia crowns veneered with CAD/CAM generated glass ceramics by the sintering technique are superior to those veneered with feldspathic porcelain by the layering technique or veneered with glass ceramics by the heat-pressing technique in terms of fracture strength.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.3101-3101
• /
• 2001

Near Infrared spectroscopy (NIR) used on human skin measurement was explored in the past decade. Many publications in different journals and magazines discussed the feasibility of the NIR technique for cosmetic product property studies. Based upon the results of pioneers, we have pursued some work of the NIR instrument coupled with a probe module for skin measurement in vivo and vitro. In part I of this paper, the specific Near Infrared spectroscopy instrument stability, human subject conditions and other parameters, which could affect the measurements reproducibility are discussed. Second derivative NIR spectra and Principle Components Analysis (PCA) are utilised for data interpretation. In part II of this paper, the relationship of human skin moisture and ageing, the gender information and finally, the discovery of penetration depth of NIR incident light on skin are reported. A theoretical penetration depth calculation equation is proposed. In part III, the study results of a couple of commercial skin care products effect will be described. The skin lotions were applied on human skin (in vivo) in order to exam the NIR feasibility to monitor the changes of moisture level. The results are consistently positive. From our primary study, it can conclude that the NIR is potentially a very powerful instrument for skin condition diagnostics, either for cosmetic and/or for medication purposes.

• 한국수정란이식학회지
• /
• 제14권1호
• /
• pp.23-29
• /
• 1999

The objectives of the study were to establish sperm separation method and duration of insemination for bovine IVF. Oocytes from slaughterhouse ovaries were matured and fertilized using general protocol. After 18 or 42 h of insemination, six to ten embryos were placed into a 30${mu}ell$ drop of each medium, and the embryos were examined 7~10d post in semination without medium renewal. First, we compared Percoll gradient will swim-up technique for sperm separation. There was no difference in cleavage rates between them, but the development rates over morula stage of oocytes fertilized with sperm separated by Percoll gradient was significantly higher than that sperm selected by swim-up technique (p<0.05). Second, we evaluated development of bovine embryos derived from the IVF procedure with different durations(18 vs 42 h) of fertilization. There was also no difference in cleavage rates, but the development to blastocyst stage of oocytes exposed in cleavage rates, but the development to blastocyst stage of oocytes exposed to sperm for 42 h was significantly higher than that exposed for 18 h (p<0.05). In conclusion, Percoll gradient can be used for sperm selecton, improving of embryonic development. Also, 42h of IVF may improve the development of bovine embryos.

• 구강회복응용과학지
• /
• 제32권3호
• /
• pp.158-168
• /
• 2016

본 논문은 기존에 선행되었던 연구들을 바탕으로 고정성 보철물의 내면 및 변연적합도를 평가하는 여러 가지 방법에 관하여 정리하였으며, 각 방법에 대한 장, 단점에 대해 언급하였다. 보철물의 적합도를 평가하는 방법은 크게 임상적 평가법과 실험실 평가법으로 분류할 수 있다. 임상적 평가법에는 탐침 검사법, 방사선 사진 검사법, 인상채득법이 있으며, 실험실 평가법에는 현미경을 이용하는 변연부 측정법, 절단면 측정법, 실리콘 복제 측정법, 그리고 마이크로 CT나 조면계를 사용하여 측정하는 방법 등이 있다. 최근 스캐닝 기법이 발전하면서 내면 및 변연적합도를 3차원적으로 평가하는 것이 가능해졌으며, 앞으로 측정법 및 분석법의 개발에 따라 보철물의 적합도 평가가 더욱 간편해지고 효과적으로 변화할 것이라 생각된다.

• 대한치주과학회:학술대회논문집
• /
• 대한치주과학회 2005년도 제45회 종합학술대회 연제초록
• /
• pp.69-69
• /
• 2005

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.759-760
• /
• 2000

5-fluorouracil loaded chitosan-cellulose microspheres was prepared by W/O/W multiple emulsions solvent evaporation technique which is appropriate to oral drug delivery. The influences of process parameters on the physical characteristics of microspheres and on in vitro drug release were investigated.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권8호
• /
• pp.1120-1126
• /
• 2006

Dry matter (DM) degradation of leaves from Quercus cercis, Quercus libari, Quercus branti, and Quercus coccifera was determined using two different techniques: (i) in vitro gas production and (ii) the nylon bag degradability technique. In vitro gas production in the presence or absence of PEG and in situ DM disappearance were measured at 3, 6, 12, 24, 48, 72 and 96 h. In situ and in vitro DM degradation kinetics were described using the equation y = a+b ($1-e^{-ct}$). At all incubation times leaves from Quercus branti incubated with or without PEG gave significantly higher gas production than the other oak leaves except for 3 and 6 h incubation when leaves from Quercus branti without PEG supplementation only gave higher gas production than Quercus cercis and Quercus coccifera. At all incubation times except at 3, 6 and 12 h the DM disappearance from Quercus branti was significantly higher than the other species. Generally, PEG supplementation considerably increased the gas production at all incubation times and estimated parameters such as gas production rate ($c_{gas}$), gas production (ml) from the quickly soluble fraction ($a_{gas}$), gas production (b) from the insoluble fraction, potential gas production (a+b). However, all oak leaves did not give the same response to the PEG supplementation. Although the increase in gas production at 96 h incubation time was 8.9 ml for Quercus libari the increase was 5.5 ml for Quercus coccifera. It was concluded that except at early incubation times the relationships between the two methodologies seem to be sufficiently strong to predict degradability parameters from gas production parameters obtained in the presence or absence of PEG.

• 한국전자파학회논문지
• /
• 제14권12호
• /
• pp.1311-1320
• /
• 2003

본 논문에서는 RF 전자기장을 사용한 동물 및 세포 실험에서 전자기장 노출량의 정확성을 평가할 수 있는 방법을 제안하였다. 이를 위해 전자파 흡수율(SAR)을 전자기장 노출량의 단위로 사용한 동물 및 세포 연구 논문과 휴대폰 및 PDA에 대한 전자파 흡수율 시험 성적서를 대상으로 출력 전력, 전력 밀도 등과 SAR의 상관 관계 및 회귀 관계를 분석하였다. 동물 실험의 경우 전력 밀도와 SAR이, 세포 실험의 경우 출력 전력이 duty factor를 고려한 SAR과 통계적으로 유의한 상관 관계를 보였다. 회귀분석에서의 노출 불확실성을 평가하기 위해 결정계수값을 분석하였다. 각각의 실험장치 및 방법에 대한 해석 또는 측정 기법의 분석 이전에 본 연구 방법을 실시하여 대상 연구군의 특성을 고찰한다면 보다 효율적인 전자기장노출신뢰성 평가를 실시할 수 있을 것으로 판단된다.

• 대한수의학회지
• /
• 제38권4호
• /
• pp.882-897
• /
• 1998

This experiment was conducted to predict the effects of motional characteristics on the fertility of Korean native cattle(KNC) by using CASA technology and in vitro fertilization system. Twenty-six KNC frozen semen straws were obtained from Korean KNC improvement department, livestock improvement main division, national livestock cooperatives federation in Korea. Specimens were allowed to thaw at $37^{\circ}C$ for 30 sec in water bath. Semen analysis was performed on semen image analysis system(SIAS, Medical supply, Korea) adjusted to the gate settings and used the semen droplet ($5{\mu}l$) placed on Makler counting chamber(Sefi medical instrument, Israel) prewarmed at $37^{\circ}C$. The same person used the same micropipette to fill the Makler counting chamber. A total of 150 or more of sperms were analysed in each specimen by a single trained person by scanning at least 5 to 10 fields. The oocytes collection, in vitro maturation, IVF, in vitro culture and determination of the cleavage rate were performed by the technique, as described by Hwang et al (1997). Statistical analysis was done by linear regression with use of the Sigma plot program on a IBM personal computer. The cleavage rate in vitro fertilized oocyte was significantly correlated(P<0.05) with MOT, VCL, VSL, VAP, ALH, BCF and MAD, but not CON, LIN, STR, WOB, DNM, DNC and HYP in regressional analysis. The results show that some kinematic characteristics of frozen-thawed semen by CASA can be predict the fertility in in vitro model system.