In situ experimental studies were Performed at Yongjong Island Geotechnical Experimental Site to evaluate the ground densification on sand deposited. Standard penetration test, cone penetration test, and SASW test were performed and soil profiles and quality of ground improvements were evaluated. The feasibility of applying SASW method were verified by comparing test results. The evaluation technique of in-situ density using SASW and resonant column tests was proposed, and the reliability of proposed method was verified by performing case studies.
본 논문에서는 국내. 외에서 처음으로 시도되는 현장타설 팽이기초공법의 거동특성을 검토하기 위하여 기초형식을 현장타설 팽이기초(In-Situ TBF), 공장제작 콘크리트 팽이기초(PC-TBF) 전면기초, 무처리 원지반으로 나누어 모형토조실험을 수행하였다. 모형실험결과 현장타설 팽이기초와 공장제작 콘크리트 팽이기초의 거동특성은 거의 유사하게 나타났으며, 이들 팽이기초는 원지반 및 전면기초에 비하여 지지력 증대효과가 있는 것으로 나타났다. 또한, 기초 형식에 따른 지중연직응력 분포를 검토한 결과 팽이기초 설치시 지중연직응력의 영향범위가 감소하는 것을 확인할 수 있었다. 한편, 지반이 조밀할수록 팽이기초의 응력분산효과가 감소하는 것을 알 수 있었으며, 향후 다양한 지반조건에서 모형실험과 수치해석을 통해 보다 많은 검토가 수행되어야 할 것으로 판단된다.
PURPOSES : Recently, bonded concrete overlay has been used as an alternative solution in concrete pavement rehabilitation since its material properties are similar to those of the existing concrete pavements. Deteriorated concrete pavements need rapid rehabilitation in order to prevent traffic jams on Korean expressways. Moreover, speedy and effective repair methods are required. Therefore, the use of bonded concrete overlay with ultra-rapid hardening cement has increased in an effort to reopen promptly the expressways in Korea. However, mobile mixer is required for ultra-rapid hardening cement concrete mixing in the construction site. The use of mobile mixer causes various disadvantages aforementioned such as limitation of the construction supply, open-air storage of mixing materials, increase in construction cost, and etc. In this study, therefore, hydration accelerator in-situ mixing on polymer modified concrete produced in concrete plant is attempted in order to avoid the disadvantages of existing bonded concrete overlay method using ultra-rapid hardening cement. METHODS : Bonded concrete overlay materials using ultra-rapid hardening cement should be meet all the requirements including structural characteristics, compatibility, durability for field application. Therefore, This study aimed to evaluate the application of hydration accelerator in-situ mixing on polymer modified concrete by evaluating structural characteristics, compatibility, durability and economic efficiency for bonded concrete overlay. RESULTS : Test results of structural characteristics showed that the compressive, flexural strength and bond strength were exceed 21MPa, 3.15MPa and 1.4MPa, respectively, which are the target strengths of four hours age for the purpose of prompt traffic reopening. In addition, tests of compatibility, such as drying shrinkage, coefficient of thermal expansion and modulus of elasticity, and durability (chloride ions penetration resistance, freezing-thawing resistance, scaling resistance, abrasion resistance and crack resistance), showed that the hydration accelerator in-situ mixing on polymer modified concrete were satisfied the required criteria. CONCLUSIONS : It was known that the hydration accelerator in-situ mixing on polymer modified concrete overlay method was applicable for bonded concrete overlay and was a good alternative method to substitute the existing bonded concrete overlay method since structural characteristics, compatibility, durability were satisfied the criteria and its economic efficiency was excellent compare to the existing bonded concrete overlay methods.
디지로그 북(Digilog book)은 기존 서적과 디지털 콘텐츠을 융합함으로써, 아날로그적 감성과 디지털 오감을 함께 제공하는 증강현실기반 차세대 출판물이다. 디지로그 북을 저작할 수 있는 저작 소프트웨어인 아틀렛(ARtalet)은 증강현실 환경에서 3 차원 사용자 인터페이스를 이용한 직관적인 In-Situ 저작 환경을 제공한다. 본 논문은 디지로그 북에 증강된 3D 객체에 이동 경로를 생성하고 조작 할 수 있는, 아틀렛 저작 환경 기반의 이동 궤적 편집 기법을 제안한다. 구체적으로 이동 궤적의 조정점(Control point)을 적절히 할당하기 위해서 3차원 조작도구의 이동 좌표에 대하여 조정점 할당 검사를 한다. 그리고 부드러운 곡선 형태로 이동 궤적을 복원하기 위해서 스플라인을 이용한 보간 과정을 수행한다. 또한 작고 밀집된 이동 궤적의 조정점을 효과적으로 선택하기 위해서 동적 스코어(Score)를 기반으로 한 조정점 선택 방법을 적용한다. 실험 결과 제안한 방법은 기존 방법에 비해 오차와 완료시간은 유의한 차이가 없었지만, 조정점의 수를 약 90% 이상 감소시킬 수 있었다. 이것은 매우 적은 수의 조정점만으로도 이동궤적을 복원할 수 있으며 추후 이동 궤적 조작에 필요한 조정점의 조작 횟수를 대폭 줄일 수 있다는 것을 의미한다. 또한 제안한 방법은 기존의 조정점 조작 방법에 비해 상대적으로 적은 손과 팔의 움직임만으로도 빠르게 이동 궤적의 형태를 변경 할 수 있었다. 본 논문에서 제안한 3D 객체의 이동 궤적 편집 방법은 몰입형 In-Situ 증강현실 환경의 교육, 게임, 디자인, 애니메이션, 시뮬레이션 등의 분야에서 드로잉 또는 곡선 편집 방법으로 응용될 수 있다.
수분산 폴리우레탄(waterborne polyurethane; WPU)의 물리화학적/전기적 특성을 개선하기 위하여 그래핀에 이소시아네이트기를 도입하고 in-situ 방법으로 폴리우레탄을 중합하여 그래핀/WPU 나노 복합체를 제조하였다. 본 연구의 접근 방법으로 그래핀을 2 wt%까지 그래핀/WPU 나노 복합체에 도입하면 기존 WPU에 비해 인장강도가 57%, 전기전도도는 약 $10^2$배 정도 향상되는 결과를 얻었다. 또한 단순 블렌드 방법으로 만든 그래핀/WPU 복합체와 비교하였을 때, in-situ 중합 방법으로 제조된 복합체가 상대적으로 우수한 기계적 물성과 전기 전도도를 가졌다. 이것은 전자현미경을 이용한 복합체 단면의 형태학적 분석으로부터 이소시아네이트기가 개질된 그래핀(iGO)이 in-situ 중합 방법에 기인한 WPU 매트릭스와의 공유결합과 수소결합을 통하여 균일하게 분산되었기 때문이다.
In-situ $CaCO_3$ formation on recycled wood pulp was studied to improve optical property and filler attachment to the fiber furnish in papermaking. We tried to attach calcium oxide (CaO) to the recycled fibers, old newspaper (ONP) in this case, by using selected polymers before in-situ $CaCO_3$ formation reaction on fibers, and then, $CO_2$ was injected to the furnish until all the CaO on fiber surfaces was consumed. It was found that the attachment of newly formed $CaCO_3$ to recycled fibers became stronger by attaching CaO to the fibers before in-situ $CaCO_3$ formation reaction. It was expected that the polymers used for the attachment of calcium source to the fiber furnishes helped to keep the newly formed $CaCO_3$ strongly attached to the fiber surface as well as to retain the impurities associated with calcium source and recycled fibers, if any. In-situ $CaCO_3$ formation gave higher brightness and much less ERIC value in ONP sheet than the case when the equivalent amount of GCC was added to the furnish.
난배양성 미생물의 배양과 보다 다양한 미생물의 분리를 위하여 Filter plate microbial trap (FPMT)을 개발하였고, 이 장치를 사용하여 Greenland의 토양에서 세균을 분리하였다. FPMT는 배지와 하단부의 membrane filter(0.45 ${\mu}m$ pore size)로 구성되어 있다. 시료에 포함된 세균과 화학물질이 FPMT 내로 이동하고, 세균이 증식하는 원리이다. 그 결과, FPMT를 이용한 새로운 in situ 배양방법을 통해 통상적인 Petri dish 배양방법보다 더 많은 종과 기존의 방법으로는 배양할 수 없는 세균을 분리하였다. 이 장치는 앞으로 다양한 환경에서 난배양성 미생물을 분리하는데 유용함을 확인하였다.
Zhenzhong Liu;Kaixuan Tan;Chunguang Li;Yongmei Li;Chong Zhang;Jing Song;Longcheng Liu
Nuclear Engineering and Technology
/
제55권4호
/
pp.1476-1484
/
2023
Laboratory experiments and point monitoring of reservoir sediments have proven that stable sulfate reduction (SSR) can lower the concentrations of toxic metals and sulfate in acidic groundwater for a long time. Here, we hypothesize that SSR occurred during in situ leaching after uranium mining, which can impact the fate of acid groundwater in an entire region. To test this, we applied a sulfur isotope fractionation method to analyze the mechanism for natural attenuation of contaminated groundwater produced by acid in situ leaching of uranium (Xinjiang, China). The results showed that δ34S increased over time after the cessation of uranium mining, and natural attenuation caused considerable, area-scale immobilization of sulfur corresponding to retention levels of 5.3%-48.3% while simultaneously decreasing the concentration of uranium. Isotopic evidence for SSR in the area, together with evidence for changes of pollutant concentrations, suggest that area-scale SSR is most likely also important at other acid mining sites for uranium, where retention of acid groundwater may be strengthened through natural attenuation. To recapitulate, the sulfur isotope fractionation method constitutes a relatively accurate tool for quantification of spatiotemporal trends for groundwater during migration and transformation resulting from acid in situ leaching of uranium in northern China.
해양에 대한 인간의 이용과 활동의 증가는 해양오염, 해양생태계 및 서식지 파괴로 이어지고 있다. 이러한 결과, 특히 생애주기가 길고 개체수가 적은 해양동물은 멸종위기에 내몰리고 있는 실정이다. 따라서, 우리나라 정부는 2010년부터 수족관이나 해양박물관과 같이 인공적인 서식장소 11개를 서식지외 보전기관으로 지정하여 멸종위기에 처한 해양생물들을 보전하기 위해 노력하고 있다. 그러나, 해양생물의 보전 서비스를 제공하는 서식지외 보전기관에 대한 중요성과 그 경제적 가치를 추정한 연구는 아직 이루어지지 않고 있다. 따라서 본 연구의 목적은 우리나라 해양동물의 보호와 증식을 위한 관리방안인 서식지외 보전기관의 운영정책에 대한 일반시민들의 정량적 지지도를 추정하는 것이다. 이를 위해 우리나라 푸른바다거북의 보전을 위해 시식지외 보전기관으로 운영되고 국립해양박물관의 해양동물 보전역할에 대한 경제적 가치를 추정하였다. 연구의 결과, 서식지외 보전기관과 같은 비시장재인 공공재에 대한 대표적인 가치추정법인 조건부가치추정법을 적용하여 추정된 서식지외 보전기관(국립해양박물관)의 경제적 가치는 약 418억원에서 최대 약 781억원으로 나타났다. 이러한 본 연구의 결과는 해양동물관리 정책자들에게 우리나라 연안해역에 서식하는 멸종위기에 처한 해양동물의 효율적인 관리방안 수립에 유용한 기초자료로 활용될 수 있을 것이다.
Groundwater flow in confined aquifer and heat transport in underground geologic media are using same governing equation(line source) like well fuction. Therefore the conventional slope method using only later data obtained from in-situ thermal response test to determine the thermal conductivity of vertical geothermal heat exchanger(GHEX) is basically identical with one of Theis straight line method of aquifer test under artesian condition. In case that the pumping rate(Q, $m^3$/d) and drawdown(s,m) which are used for input data of existing hydrogeologic computer programs for aquifer test are replaced and converted to supplying heat energy per unit length of bore hole(Q/L,w/m or Kcal/h.m) and temperatures (T,$^{\circ}C$)measured at in and out-let of GHEX as in put data respectively, thermal conductivity around geothermal heat exchanger can be easily estimated without any special modification of the existing hydrogeologic computer program. Two numbers of time series temperature variation data obtained from in situ geothermal response test are analized using Theismethods(standard curve and straight line method) by using existing aquifer test program and conventional Slope method proposed by ASHRAE. The results show that thermal conductivity values estimated by two straight methods are identical and the difference of estimated values between standard curve methods and Slope method are also within acceptable ranges. In general,the thermal conductivity estimated from Theis straight linemethod gives more accurate value than the one of Slope method due to that Slope method uses only visual matching otherwise Theis method uses automatic curve matching estimation with reducing RSS.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.