• Radiation Oncology Journal
• /
• v.13 no.1
• /
• pp.69-78
• /
• 1995

Seventy four patients with soft tissue sarcomas treated by postoperative radiotherapy in the Department of Therapeutic Radiology, Seoul National University Hospital between August 1979 and September 1990 were analyzed. The follow-up Period ranged from 3 to 145 months with a median of 51 months. Liposarcoma and malignant fibrous histiocytoma(MFH) constituted $54\%$ of the cases and the histologic grades of tumors are as follows: grade I, 23 cases; grade II, 17 cases; grade III, 24 cases: unknown grade, 10 cases. The patients were treated by marginal(17 cases), wide(55 cases) or compartmental(2 cases) excision followed by Postoperative radiotherapy. The total radiation doses were 4200-8820 cGy (median 6000 cGy), 180-200 cGy daily. 5 times per week. Of 74 Patients, 35 ultimately failed. The local control was $62.2\%$ at 5 years and cumulative risk of distant metastasis was $22,3\%$ at 5 years. The overall survival and disease free survival were $72.3\%$, and $53.3\%$ at 5 years, respectively. Survival after appearance of metastasis was $15.1\%$ at 3 years. Patients with liposarcoma experienced better local control than those with other histologic type and tumor grade and surgical resection margin significantly correlated with local recurrence, distant metastasis and overall survival on univariate analysis. In conclusion, re-excision is needed for patients with positive surgical resection margin to improve local control and further therapeutic measures using effective chemotherapy should be explored in the hope of improving overall survival.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.3
• /
• pp.157-170
• /
• 2002

The purpose of this study is to analyze the shear bond strength according to kinds of surface treatment agents and resin cements after acid etching of IPS Empress 2. For this purpose, test groups were classified into silane-treated bonding groups, silica-coated group and Targis link applied group. Then, nine bonding groups in total, each three groups per kind, were prepared by using three kinds of resin cements-Panavia F, Variolink II and Rely-X ARC, and thirty test specimens per group were prepared. To examine any changes in the oral environment, the shear bond strength of each test specimen was measured after dipping test for 24 hours and for five weeks, respectively, in distilled water at $37^{\circ}C$ and performing heat cycle 10,000 times in total, each 2,000 times per week, during a five weeks of dipping, under the condition similar to the oral environment. The bond failure modes were also observed by means of a scanning electron microscope. The results are summarized as follows 1. Statically significant differences between the surface conditioning materials were observed. The shear strength of the silane treatment was the highest of all three types of surface treatments(p<0.001). 2. Shear strengths varied significantly for different types of resin luting agents. But bond strength of Targis link surface treatments were not significantly different(p<0.05). 3. No significant difference of bonding strengths was found between storage time conditions(24 hours and 5 weeks). Only group II, IV, VII, IX were significantly different(p<0.05). 4. After thermocycling, the shear bond strengths of all groups were significantly decreased (p<0.05). Group III, V, VI were no significantly different. 5. On the SEM observation of fractured surfaces, all groups were shown complex failure.

• Korean Journal of Microbiology
• /
• v.47 no.1
• /
• pp.92-96
• /
• 2011

Rhodococcus sp. strain DK17 possesses three megaplasmids (380 kb pDK1, 330 kb pDK2, and 750 kb pDK3). The alkylbenzene-degrading genes (akbABCDEF) are present on pDK2 while the phthalate operons which are duplicated are present on both pDK2 (ophA'B'C'R') and pDK3 (ophABCR). DK17 with an optimal temperature of $30^{\circ}C$ showed no growth at $37^{\circ}C$. When transferred to $30^{\circ}C$, however, the $37^{\circ}C$ culture began to grow immediately, indicating that $37^{\circ}C$ is not lethal but stressful for DK17 growth. In addition, when exposed to $37^{\circ}C$ even for a short time, a part of DK17 cells lost the ability to degrade o-xylene (a model compound of alkylbenzenes). When two hundred colonies were randomly selected for colony PCR for pDK2-specific akbC, ophC', or pDK3-specific ophC, a total of 29 colonies were found to have lost at least one of the three genes. PFGE analysis clearly showed that all the mutants have different megaplasmid profiles from that of DK17 wild type, which are divided into five different cases: Type I (10 mutants, pDK2 loss and acquisition of a new ~700 kb plasmid), Type II (9 mutants, pDK2 loss), Type III (8 mutants, pDK3 loss and acquisition of a new ~400 kb plasmid), Type IV (1 mutant, pDK3 loss), and Type V (1 mutant, pDK2 and pDK3 loss and acquisition of the ~400 kb and ~700 kb plasmids). The above results showing that growth temperature changes can induce physical changes in bacterial genomes suggest that environmental changes in habitats including temperature fluctuations affect significantly the evolution of bacteria.

• Clinical and Experimental Pediatrics
• /
• v.48 no.1
• /
• pp.27-33
• /
• 2005

Purpose : To determine incidence, characteristics and risk factors associated with intrauterine intraventricular hemorrhage(IU-IVH) among premature infants. Methods : The medical records of infants with intraventricular hemorrhage(IVH) admitted to the neonatal intensive care unit of Asan Medical Center from January 1999 to June 2003 were reviewed retrospectively. Infants whose IVH with cystic change were detected within five days of life were defined as the IU-IVH group. The control group included those without any IVH. Various maternal and neonatal factors were evaluated between the IU-IVH and control groups, and risk factors for IU-IVH were identified using multiple logistic regression analysis. Results : The incidence of IU-IVH was 49/1024(15.9%). Mothers who are younger, primiparous, use less antenatal steroid, and neonates with greater incidence of neonatal respiratory distress syndrome, had higher incidences of IU-IVH compared to neonates with normal neurosonography. Risk factors associated with IU-IVH included neonatal respiratory distress syndrome and placenta infarct by placenta biopsy. Most infants with IU-IVH were ${\geq}1,501g$, ${\geq}34$ weeks gestational age and had low grade IVH. The size of the cysts associated with IU-IVH remained the same or disappeared in 96 %. IU-IVH does not seem to affect short-term neurodevelopmental outcome although a longer period of follow-up is needed. Conculusion : IU-IVH occurred mostly in ${\geq}1,501g$, ${\geq}34$ weeks infants with grade I IVH without developmental delays. However, the high incidence of total IVH merits more attention in terms of awareness of its existence as an unusual IVH among premature infants.

• Journal of Hospice and Palliative Care
• /
• v.12 no.1
• /
• pp.27-31
• /
• 2009

Purpose: Lymphedemas are tissue fluid swellings, usually on the arms or legs, and occur as a result of impaired lymphatic drainage. Presently, the most effective treatment available is complete decongestive physiotherapy (CDP). However, this therapy is ineffective in some patients and surgery may be indicated. Herein, we examined the efficacy of minimally invasive needle aspiration of the most enlarged areas in hypodermic adipose tissues, of patients who had failed CDP. Methods: We included 21 patients who were diagnosed with lymphedema stage II-III in the upper or lower extremities and visited the lymphedema clinic at a university hospital from September 1, 2003 to February 28, 2004. All patients had been treated with CDP at least once, but had failed to respond to the therapy for more than one year. Nine patients had breast cancer and 12 had cervical cancer. We identified the area with the most severe edema by using MRI and performed a 16-gauge angio-needle aspiration on the area. The patients were followed up for 3 months. Effectiveness of the treatment was evaluated by comparing the volume of edema before and after the treatment using Wilcoxon signed rank-test. Results: The mean reduction ratio of the volume of edema comparison normal volume was 41.1${\pm}$35.3% (P=0.001). There were no major or minor operative complications except localized hemorrhage. Conclusion: We conclude that a needle aspiration prior to other surgical treatments is relatively safe and effective for those patients who are unresponsive to CDP.

• Journal of Yeungnam Medical Science
• /
• v.13 no.2
• /
• pp.243-250
• /
• 1996

Extravasation of toxic chemotherapeutic agents cause severe skin ulceration and necrosis which often need secondary surgical intervention. Still, there were not established antidote agent in case of extravasation with mitomycin-c. Dimethyl sulfoxide is known as an effective chemical scavenger of toxic hydroxyl free radical and sodium thiosulfate also was demonstrated significant protector from mitomycin-c induced ulceration by a few experimental studies. Author investigated necrotic area of mitomycin-c injected site and compare to the effectiveness of topical treatment with dimethyl sulfoxide and intradermal injection of sodium thiosulfate according to starting times, forty five mice were divided into 3 groups. Control group(n=5) had no treatment after subcutaneous injection of mitomycin-c. Experimental group I and II were 20 mice treated dimethyl sulfoxide and sodium thiosulfate, respectively. Depending on the starting time of treatment, group I and II were subdivided into 1, 2, 3 and 4 as immediate, 6 hours, 12 hours and 24 hours after mitomycin-c injection. Histologic studies of the necrotic area and survival area after treatment were performed using hematoxylin-eosin staining. The mean necrotic area of group I was significantly decreased depending on the starting time of treatment compared with control group(p<0.01). The results means there was no necrosis area which was treated with topical sodium thiosulfate within 6 hours, and it showed also significant decrease of necrosis area within 24 hours. There was also no necrosis area in group II-1 and significant decrease of necrosis area II-2 and III-3. But, effctiveness of intradermal injection of sodium thiosulfate was not found in group II-4 which was started after 24 hours. Hisotolgic findings showed a bland coagulative necrosis without inflammatory changes and no granulation tissue. The significant difference that cytoplasmic loss of subcutaneous fat and decrease number of hair follicles between two groups resulted from the methods of treatment by topical application and intradermal injection. In conclusion, immediate treatments with topical dimethyl sulfoxide or intradermal injection of sodium thiosulfate signifcantly prevents necrosis by extravasation of mitomycin-c.

• Journal of Animal Science and Technology
• /
• v.45 no.2
• /
• pp.319-326
• /
• 2003

Angiotensin-I converting enzyme(ACE)inhibitor was isolated from beef by-products. The beef by- product hydrolysates prepared with various proteases were tested for the inhibitory effects against ACE. The proteases used were proteinase A from bakers yeast, protease type ⅩIII fungal and thermolysin. The maximum inhibitory effect was observed after hydrolysis for 12hrs(beef heart) and 24hrs(beef spleen), respectively. After gel filtration, IC50 value was 0.37mg/ml in beef heart and 1.84mg/ml in beef spleen. After RP-HPLC, the IC50 value of peak 1, peak 2, peak 3 and peak-4 were 0.28mg/ml, 0.26mg/ml, 0.25mg/ml and 0.35mg/ml, respectively. In the results of amino acid composition of peak 1, peak 2, peak 3 and peak 4, it was observed that peak 1 was consisted mainly of glycine and methionine, peak 2 was proline, cystine and methionine, peak 3 was proline and peak 4 was alanine, methionine and leucine. In conclusion, beef heart hydrolysate treated with thermolysin+ proteinase A was shown to have the highest inhibitory effect for 12hrs incubation at 37$^{\circ}C$.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.4
• /
• pp.451-466
• /
• 2009

While substorms are known to generally occur under southward IMF conditions, they can sometimes occur even under northward IMF conditions. In this paper, we studied the substorms that occurred in May, 2000 to 2002 to examine some statistical characteristics of the IMF and solar wind associated with northward IMF substorms. We focused on the cases where two or more substorms occurred successively under northward IMF conditions. Also, by checking Sym-H index associated with each of the substorms we determined whether or not there is any association of such northward IMF substorm occurrence with storm times. We also examined statistical properties at geosynchronous altitude in terms of magnetic field dipolarization and energetic particle injection. The following results were obtained. (i) Most of the northward IMF substorms occurred under average solar wind conditions. The majority of them occurred within 2 hrs duration of northward IMF Bz state, but there are also a nonnegligible number of substorms that occurred after a longer duraiton of northward IMF Bz state. (ii) While most of the substorms occurred as isolated from a magnetic storm time, those that occurred in a magnetic storm time show a higher average value of IMF and solar wind than that for the isolated substorms. (iii) About 55% of the substorms were associated with the IMF clock angle that can possibly allow dayside reconnection, and the other 45% were associated with more or less pure northward IMF conditions. Therefore, for the latter cases, the energy input from the solar wind into the magnetosphere should be made by other way than the dayside reconnection. (iv) For most of the substorms, the magnetic field dipolarizations and energetic particle injections at geosynchronous altitude were identified to be generally weak. But, several events indicated strong magnetic field dipolarizations and energetic particle injections.

• Journal of the Korean Chemical Society
• /
• v.17 no.3
• /
• pp.145-153
• /
• 1973

The temperature effects on the equilibria between polymolybdatd anions in 1M sodium perchlorate solution has been investigated in the temperature range of 20~50$^{\circ}$C. The polymolybdate anions formed are heptamolybdate ($Mo_7O_{24}^{6-}$) ions and the protonized forms of heptamolybdate ions ($H_LMo_7O_{24}^{(6-L)-}$). The equilibrium constants for the formation of heptamolybdate ions calculated by Sillen's method are as follow;$8H^{+}+7MoO_4^{2-}=Mo_7O_{24}^{6-}+4H_2O$, $k_{7.8}=2.77{\times}10^{53}:20^{\circ}C= 9.29{\times}10^{51}:40^{\circ}C$,$k_{7.8}= 4.22{\times}10^{52}:30^{\circ}C = 9.29{\times}10^{51}:50^{\circ}C$ The enthalpy change for calculated for the above reaction is 31.51 kcal/mole. A method of calculation of the equilibrium constants for the formation of protonized heptamolybdate ions from heptamolybdate ions and hydrogen ions has been derived. The equilibrium constants calculated for the formation of protonized heptamolybdate ions are as follow; $ LH^++ Mo_7O_{24}^{-6} = H_LMo_7O_{24}^{(6-L)-} : L = 1\;or\;2$, $k_1 = 2.31{\times}10^4=2.53{\times}10^4=2.76{\times}10^4= 3.10{\times}10^4$, $k_2 = 6.19{\times}10^7\;20^{\circ}C = 7.80{\times}10^7\;30^{\circ}C = 1.22{\times}10^8\;40^{\circ}C = 2.03{\times}10^8\;50^{\circ}C$The enthalpy change for the following step reactions are as follow;$H^{+}+Mo_7O_{24}^{6-}= HMo_7O_{24}^{5-}\;{\Delta}H^{\circ}=1.90 kcal/mole$, $2H^{+}+Mo_7O_{24}^{6-}=H_2Mo_7O_{24}^{4-}\;{\Delta}H^{\circ}=7.50kcal/mole$

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.5
• /
• pp.514-523
• /
• 2004

Statement of problem: All-ceramic restorations have been advocated for superior esthetics. Various post and core systems have been used to improve the strength of damaged teeth, but it is unclear whether they affect the final shade of finished all-ceramic restorations. Purpose: The influence of different types of post and core systems on light transmission through all-ceramic crowns was assessed by spectrophotometric analysis. Also the masking effect of different thickness of ceramic ingot was evaluated. Material and Methods : Forty-five sample disks (15mm in diameter) at several thickness(1.0, 1.5, 2.0mm) and value(shade 100, 200, 300) were made in heat pressed ceramic(IPS-Empress). Background specimens simulating gold-alloy cast posts(Type III casting gold alloy), metal posts(Ni-Cr casting alloy) and ceramic posts(CosmoPost) were fabrica-ted. Resin composite(Z250, A3 shade) was used as a tooth substrate reference. For each combination, the change in color was measured with a spectrophotometer. Readings were performed for 2 conditions (1) ability of ceramic to mask the core in relation to its thickness(1.0, 1.5, or 2.0mm) ; (2) influence of post and core types on the final color of the ceramic. Data were recorded according to the CIE $L^*a^*b^*$ systems and color difference($\Delta$E) was calculated. Results: 100 shade ingot: when ceramic thickness was 1.0mm, $\Delta$E value for ceramic post larger than 1 but $\Delta$E value for metal and gold post was larger than 2. For ceramic thickness of 1.5mm, only $\Delta$E value for metal was larger than 2, and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 2. 200 shade ingot: when ceramic thickness was 1.0mm, $\Delta$E value for ceramic post was smaller than 1 but $\Delta$E value for metal and gold post was larger than 2. For ceramic thickness of 1.5 mm, only the $\Delta$E value for metal was larger than 2, and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 1. 300 shade ingot: when ceramic thickness was 1.0mm, only $\Delta$E value for metal was larger than 2 and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 1.5mm, $\Delta$E values for all specimens was smaller than 1. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 1. Conclusion: The final esthetic result of the IPS-Empress glass-ceramic restoration was not affected by the presence of different core materials when the thickness was more than 2.0 mm. When ceramic thickness decreases to 1.5mm, it is advised to take the substrate aspects into consideration. If the ceramic thickness is less than 1.0mm, using the tooth color matched substrate is strongly recommended.