• Journal of Korean Neurosurgical Society
• /
• 제42권1호
• /
• pp.20-26
• /
• 2007

Objective : We present the difference of histopathologic changes of the internal elastic lamina (IEL) and collagen III in the superficial temporal artery (STA) between aneurysmal patients and non-aneurysmal patients. Also, the pathologic data with clinical features by comparative methods to validate the risk factor of the intracranial aneurysm are presented. Methods : Samples of the STA were harvested form 38 patients including aneurysmal and non-aneurysmal patients undergoing craniotomy. Paraffin-embedded sections were examined, using hematoxylin and eosin, van Giebson and mouse anti-collagen III staining techniques. Histopathological observations were ana lysed and correlated with clinical features such as presence of aneurysm, hypertension, age, and sex. Results : Twenty-seven patients had the intracranial aneurysm. Of these 24 patients were 50 years old or older. Nineteen patients had a history of hypertension. Twenty patients were female. Histopathological study demostrated the derangement of IEL and the deficiency of type III collagen were prominent in aneurysmal patients (p < 0.05). Fifty years old or older patients did not show correlation with the deficiency of type III collagen, but with the derangement of IEL (p < 0.05). The female sex was not correlated with the derangement of IEL but with the deficiency of type III collagen (p < 0.05). However, Hypertension was not correlated with these pathologic data. Conclusion : Patients with intracranial aneurysms have severe histopathologic changes of the arterial wall showing the derangement of IEL and the deficiency of type III collagen. In the clinico-pathologic study, the advanced age and female sex were considered as risk factors of the intracranial aneurysm.

• 한국광물학회지
• /
• 제20권2호
• /
• pp.125-134
• /
• 2007

본 연구에서는 석탄 광산배수에 함유된 중금속을 부유선별로 제거하기에 앞서 부유선별 조건에 영향을 미치는 철, 망간, 알루미늄 이온의 침전특성을 알아보았다. Fe(III), Mn(II), Al(III) 이온을 NaOH와 반응시켜 1 h 동안 침전시키면 Fe(III)은 pH 5.0 이상에서, Mn(II)은 pH 10.0 이상에서 그리고 Al(III)은 pH $6.0{\sim}9.0$의 범위에서 대부분 침전되어 여액에 $1.0mgL^{-1}$ 이하로 잔류되었다. Fe(III), Mn(II), Al(III)의 혼합 용액에 포수제인 올레인산나트륨을 첨가하였을 경우, 각각의 중금속 이온은 올레인산나트륨과 반응하여 불용성 염을 거의 형성하지 않았기 때문에 침전 부선법으로 광산배수에 함유된 중금속을 제거해야 하는 것으로 나타났다.

• 한국환경농학회지
• /
• 제40권1호
• /
• pp.67-72
• /
• 2021

BACKGROUND: Biological iron redox transformation alters iron minerals, which may act as effective adsorbents for arsenate [As(V)] in the environments. In the viewpoint of alleviating arsenate, microbial Fe(III) reduction was sought under high concentration of As(V). In this study, Fe(III)-reducing bacteria were isolated from the wild plant rhizosphere soils collected at abandoned mine areas, which showed tolerance to high concentration of As(V), in pursuit of potential agents for As(V) bioremediation. METHODS AND RESULTS: Bacterial isolation was performed by a series of enrichment, transfer, and dilutions. Among the isolated strains, two strains (JSAR-1 and JSAR-3) with abilities of tolerance to 10 mM As(V) and Fe(III) reduction were selected. Phylogenetic analysis using 16S rRNA genesequences indicated the closest members of Pseudomonas stutzeri DSM 5190 and Paenibacillus selenii W126, respectively for JSAR-1 and JSAR-3. Ferric and ferrous iron concentrations were measured by ferrozine assay, and arsenic concentration was analyzed by ICP-AES, suggesting inability of As(V) reduction whereas ability of Fe(III) reduction. CONCLUSION: Fe(III)-reducing bacteria isolated from the enrichments with arsenate and ferric iron were found to be resistant to a high concentration of As(III) at 10 mM. We suppose that those kinds of microorganisms may suggest good application potentials for As(V) bioremediation, since the bacteria can transform Fe while surviving under As-contaminated environments. The isolated Fe(III)-reducing bacterial strains could contribute to transformations of iron minerals which may act as effective adsorbents for arsenate, and therefore contribute to As(V) immobilization

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 총회 및 춘계학술발표회
• /
• pp.250-253
• /
• 2002

Remediation of groundwater using zero valent iron filings has received considerable attention in recent years. However, zero valent iron is gradually transformed to iron(III) oxides at permeable reactive barriers, so the reduction of iron(III) oxides can enhance the longevity of the reactive barriers. In this study, microbial reduction of Fe(III) was performed in anaerobic condition. A medium contained nutrients similar to soil solution. The medium was autoclaved and deoxygenated by purging with 99.99% $N_2$ and pH was buffered to 6, while the temperature was regulated as 2$0^{\circ}C$. Activity of iron reducing bacteria were not affected by chlorinated organics but affected by iron(III) oxide. Although perchloroethylene(PCE) was not degraded with only ferric oxide, PCE was reduced to around 50% with ferric oxide and microorganism. It shows that reduced iron can dechlorinate PCE.

• Smart Structures and Systems
• /
• 제25권4호
• /
• pp.459-469
• /
• 2020

The presence of cracks in mechanical components is a very important problem that, if it is not detected on time, can lead to high economic costs and serious personal injuries. This work presents a methodology focused on identifying cracks in unbalanced rotors, which are some of the most frequent mechanical elements in industry. The proposed method is based on Artificial Neural Networks that give a solution to the presented inverse problem. They allow to estimate unknown crack parameters, specifically, the crack depth and the eccentricity angle, depending on the dynamic behavior of the rotor. The necessary data to train the developed Artificial Neural Network have been obtained from the frequency spectrum of the displacements of the well- known cracked Jeffcott rotor model, which takes into account the crack breathing mechanism during a shaft rotation. The proposed method is applicable to any rotating machine and it could contribute to establish adequate maintenance plans.

• Journal of Microbiology and Biotechnology
• /
• 제9권2호
• /
• pp.127-131
• /
• 1999

Anaerobically grown cells of an Fe(III)-reducing bacterium, Shewanella putrefaciens IR-l, were electrochemically active with an apparent reduction potential of about 0.15 V against a saturated calomel electrode in the cyclic voltammetry. The bacterium did not grow fermentatively on lactate, but grew in an anode compartment of a three-electrode electrochemical cell using lactate as an electron donor and the electrode as the electron acceptor. This property was shared by a large number of Fe(III)-reducing bacterial isolates. This is the first observation of a direct electrochemical reaction by an intact bacterial cell, which is believed to be possible due to the electron carrier(s) located at the cell surface involved in the reduction of the natural water insoluble electron acceptor, Fe(III).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.263-266
• /
• 2002

The KSR-III developed by KARI is the first rocket vehicle which is adopting the liquid propellant rocket engine system in Korea. Not only the engine itself, but also the propellant feeding system is one of the most important component in liquid rocket vehicle. In this paper, the authors are intended to introduce the multi-purpose test facility(PTA-II Test Facility) which is constructed for the variety of tests on KSR-III feeding system(single component tests, verification tests, cold flow tests and combustion tests). With the results of these tests, we can identify the characteristics of rocket feeding system and decide the optimum setting values of feeding system for the successful flight.

• 한국표면공학회지
• /
• 제32권4호
• /
• pp.538-546
• /
• 1999

Ti(IV)-Fe(III) oxide films were formed by MOCVD technique, and their photoelectrochemical properties were examined in 0.5M N $a_2$$SO_4$ solution by a photoelectrochemical polarization test. Ti(IV)-Fe(III) oxide films deposited at 40$0^{\circ}C$ by MOCVD have crystalline structure and are all n-type semiconductors. The photocurrent and the quantum efficiency of the films increase with increasing the iron cationic fraction ($X_{Fe}$ ) in the films. The energy band gap of the films increase linearly with increasing the iron cationic fraction in the films. Ti(IV)-Fe(III) oxide film of $X_{Fe}$ /=0.60 has high photocurrent response and corrosion resistance simultaneously.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.273-279
• /
• 2000

Until recently performance requirements for automatic transmission fluids have continued to change to reflect the design changes of automatic transmission. The major purpose for these design changes is to improve the fuel economy and easy driving. To meet recent performance requirements fur automatic transmission the needs for special base oils Bike API Group III and IV base oils become larger. In this paper to evaluate the effects of base oils on performance of automatic transmission fluids formulated with API Group I,II,III and IV and Dexron III and Hereon Type additive package, Brookfield viscosity, oxidation test, SAE No.2 friction test and seal compatibility test were examined. From the test we knew that the use of Croup III and IV base oils in ATF has several benefits in low temperature viscosity, oxidation stability and SAE No.2 friction characteristics.

• 한국정밀공학회지
• /
• 제29권9호
• /
• pp.938-945
• /
• 2012

To design and estimate material failures of Type III pressure vessels, which have excellent stability and performance, various modeling techniques have been introduced. This paper provided a hybrid modeling technique composed of ply-based modeling for a cylinder part and laminate-base modeling technique for a dome part for enhancing modeling efficiency. The ply-based modeling technique provided accurate ply stresses directly for predicting material failure, on the other hand, additional manipulations in stress calculations, which may cause some errors, were needed for the case of the laminate-based modeling technique. The ply stresses in fiber, transverse and in-plane shear directions were compared with the corresponding material strengths to predict material failure.