• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.73-77
• /
• 2003

Stability rating of KSR-III rocket engine is conducted based on stability rating tests in the course of development of KSR-III rocket engine. Rocket engine is approved to have combustion stabilization ability when it can suppress the external perturbation or pressure oscillation with finite amplitude and recover the original stable combustion. Rocket engine in flight nay be perturbed with unexpectedly large amplitude and thus a designer should not only assure combustion stabilization ability of the engine but also quantify the stabilization capacity. For this, several quantitative parameters and their evaluation are introduced. To verify dynamic stability of KSR-III rocket engine, five stability rating tests have been conducted. Based on these test results, such parameters are quantified and thereby, the stabilization capacity of KSR-III rocket engine is evaluated.

• Journal of Korean Critical Care Nursing
• /
• v.8 no.1
• /
• pp.71-79
• /
• 2015

Purpose: The purpose of this study was to compare the applicability of the Charlson Comorbidity Index (CCI) and Acute Physiology, Age, Chronic Health Evaluation III (APACHE III) to the prediction of the healthcare outcomes of intensive care unit (ICU) patients. Methods: This research was performed with 136 adult patients (age>18 years) who were admitted to the ICU between May and June 2012. Data were measured using the CCI score with a comorbidity index of 19 and the APACHE III score on the standard of the worst result with vital signs and laboratory results. Discrimination was evaluated using receiver operating characteristic (ROC) curves and area under an ROC curve (AUC). Calibration was performed using logistic regression. Results: The overall mortality was 25.7%. The mean CCI and APACHE III scores for survivors were found to be significantly lower than those of non-survivors. The AUC was 0.835 for the APACHE III score and remained high, at 0.688, for the CCI score. The rate of concordance according to the CCI and the APACHE III score was 69.1%. Conclusion: The route of admission, days in ICU, CCI, and APACHE III score are associated with an increased mortality risk in ICU patients.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.4
• /
• pp.1-10
• /
• 2001

In this paper, we propose the stability analysis and design methodology for the discrete-time affine Type III fuzzy system via the convex optimization technique. First, the stability condition is derived under which the discrete-time affine Type III fuzzy system is quadratically stable in the large. Next, the derived condition is reformulated into the convex optimization problem called Linear Matrix Inequalities (LMI) and numerically addressed. Finally, the effectiveness and the feasibility of the proposed analysis and design methodology is highlighted via an example and its computer simulation result.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.10
• /
• pp.2213-2216
• /
• 2009

A novel carbazole functionalized bis-$\beta$-diketone type organic ligand, 1,1′-(2,6-bispyridyl)bis-3-(9-ethylcarbazole- 3-yl)-1,3-propanedione ($H_2L$) and its corresponding lanthanide complexes $Eu_2(L)_3\;and\;Tb_2(L)_3$ were successfully prepared. The ligand and complexes were characterized in detail based on FT-IR spectra, $^1H$ NMR and elemental analysis. The observed UV-Vis absorption and photoluminescence properties of the complexes were investigated, it shows that the Eu(III) and Tb(III) ions can be sensitized efficiently by the ligand ($H_2L$) to some extent, in particular, the complex $Tb_2(L)_3$ exhibits a more excellent luminescence property than the Eu(III) complex. Meanwhile, the introduction of the carbazole moiety can enlarge the $\Pi$-conjugated system of the ligand and enhance the luminescent intensity of the complexes. The results show that the complexes would be used as excellent luminescent materials.

• ETRI Journal
• /
• v.26 no.2
• /
• pp.167-180
• /
• 2004

As component-based development (CBD) rapidly spread throughout the software industry, a comprehensive methodology is needed to apply it more systematically. For this purpose, a new CBD methodology named Magic & Robust Methodology Integrated III (MaRMI-III) has been developed. The purpose of this paper is to present MaRMI-III by its constituent processes and claim that it can be used to support system developers conduct CBD in a consistent manner. First, we review the CBD approach to system development and the role of CBD methodology, and then we explain the several characteristics of MaRMI-III which are considered necessary to the CBD environment. Next, we explain a process model of MaRMI-III which separates the development process from the project management process and prescribes well-ordered activities and tasks that the developer should conduct. Each phase forming the Process Model is explained in terms of its objectives and main constituent activities. Some techniques and workproducts related to each phase are also explained. Finally, to examine the usefulness of MaRMI-III, an analytical comparison with other CBD methodologies and the results of a questionnaire survey are described.

• The korean journal of orthodontics
• /
• v.15 no.1
• /
• pp.85-92
• /
• 1985

This investigation was designed to compare the craniofacial morphology of Class III malocclusions with that of normal occlusions using PM line. The subjects consisted of forty-four normal occlusions (twenty-three males and twenty-one females) and sixty-nine Class III malocclusions (thirty males and thirty-nine females), aged eight through ten. Using the tracings of the standard lateral cephalograms, various angles, linear measurements and linear ratios of counter-part were recorded and analyzed by t-test. The following characteristics of craniofacial morphology of Class III malocclusion were obtained by this study. 1. Maxillary anteroposterior position was balanced with Nasion but was not balanced with mandible because maxillary bony arch was small and positioned posteriorly and mandibular corpus was large and positioned relatively anteriorly. 2. Upper and lover alveolar bony arch were not balanced each other in its size. 3. In counterpart analysis, Class III malocclusion was more horizontally unbalanced than normal occlusion. 4. Class III malocclusion was divided into 11 groups by maxillary and mandibular bony arch position, size and alveolar bony arch size. Unbalanced bony size of the maxilla and mandible was a major characteristics of Class III malocclusion.

• Current Photovoltaic Research
• /
• v.6 no.4
• /
• pp.109-118
• /
• 2018

Silicon (Si) solar cells are the most successful technology which are ruling the present photovoltaic (PV) market. In that essence, multijunction (MJ) solar cells provided a new path to improve the state-of-art efficiencies. There are so many hurdles to grow the MJ III-V materials on Si substrate as Si with other materials often demands similar qualities, so it is needed to realize the prospective of Si tandem solar cells. However, Si tandem solar cells with MJ III-V materials have shown the maximum efficiency of 30 %. This work reviews the development of the III-V/Si solar cells with the synopsis of various growth mechanisms i.e hetero-epitaxy, wafer bonding and mechanical stacking of III-V materials on Si substrate. Theoretical approaches to design efficient tandem cell with an analysis of state-of-art silicon solar cells, sensitivity, difficulties and their probable solutions are discussed in this work. An analytical model which yields the practical efficiency values to design the high efficiency III-V/Si solar cells is described briefly.

• Journal of the Korean earth science society
• /
• v.43 no.4
• /
• pp.532-538
• /
• 2022

Under anoxic conditions, this study investigated removal of dissolved As(III) by Si and Al oxides including natural sand, chemically washed sand (silica), alumina, and activated alumina. Despite the similar surface area, natural sand showed greater extents of As(III) sorption than chemically washed sand. This was likely due to the high reactivity of Fe(oxyhydr)oxide impurities on the surface of natural sand. For both sands, As(III) sorption was the greatest at pH 7.1, in agreement with the weakly dissociating tendency of arsenous acid. Also, the least sorption was observed at pH 9.6. At basic pH, elevated silicate, which originated from the dissolution of silica in sands, would compete with As(III) for sorption. Due to the highest surface area, activated alumina was found to quantitatively immobilize the initially added As(III) (6.0×10^-7-2.0×10^-5 M). Alumina showed As(III) sorption compared to or greater than chemically washed sand, although the former had less than 6% of the surface of area the latter. The greater reactivity of alumina than chemically washed sand can be explained by using the shared charge of oxygen.

• The korean journal of orthodontics
• /
• v.52 no.6
• /
• pp.432-438
• /
• 2022

Objective: To compare crown-root angulations of the permanent maxillary anterior teeth in skeletal Class I, Class II, and Class III Korean malocclusion patients using cone-bean computed tomography (CBCT) images. Methods: Sixty CBCT images were collected from orthodontic patients archive based on skeletal Class I (0˚< A point-nasion-B point angle [ANB] < 4˚), Class II (ANB ≥ 4˚), and Class III (ANB ≤ 0˚) to have 20 samples in each group. Mesiodistal crown-root angulation (MDCRA) and labiolingual crown-root angulation (LLCRA) were evaluated after orientation of images. Crown-root angulations were compared among Class I, Class II, and Class III groups and among the maxillary anterior teeth in each group. Results: LLCRAs of the maxillary central incisor and the lateral incisor were significantly lower in Class III group than those in Class I group. However, those of the canine showed no significant differences among groups. MDCRAs of the maxillary anterior teeth did not significantly differ among groups either. Conclusions: Our results suggest that skeletal Class III malocclusion might affect LLCRA of the maxillary incisors, especially the central incisor.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.1008-1013
• /
• 2001

KSR-III propulsion system designed in KARI has a gas-pressurization system for propellant feeding system. This system uses a regulator for the control of the ullage pressure of propellant tank and a venturi for passive control of propellant flowrate. This system seems to be very reliable, but the flowrate of propellant varies according to the change of acceleration with the rocket flight. In this paper, dynamic characteristic of KSR-III propulsion feeding system was analyzed in flight condition. The purpose of this research is to find the variation of off ratio and propellant flowrate change for certification condition of engine reliability test.