• Journal of the Korean Chemical Society
• /
• v.38 no.1
• /
• pp.50-54
• /
• 1994

Spectrophotometric determination of some light lanthanide ions by flow injection method is described. Chromeazurol S forms water soluble complex with lanthanide ions in the presence of DTAB. The absorption maximum of the complexes are from 650 nm to 655 nm and the molar absorptivities were ca. $1.8{\times}10^5\;L mol^{-1}cm^{-1}$ on Tris buffer (pH 10.5). The calibration curves for Nd(III), Eu(III) and Sm(III) obtained by FIA are over the range of 0.1 to 0.6 ppm and the correlation coefficient were ca. 0.9993. The detection limits (S/N) were from 10 ppb for Nd(III) and Eu(III) to 20 ppb for Sm(III). The relative standard deviations was ${\pm}$.2% for 0.4 ppm sample. The samples throughput was ca. $50\;cm^{-1}$.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.2
• /
• pp.121-127
• /
• 2014

An atomistic-based finite bond element model for predicting the tearing mode (mode III) fracture of a single-layer graphene sheet (SLGS) is developed. The model uses the modified Morse potential for predicting the maximum strain relationship of graphene sheets. The mode III fracture of graphene under out-of-plane shear loading is investigated with extensive molecular mechanics simulations. Molecular mechanics is used for describing the displacements of atoms in the area near a crack tip, and linear elastic fracture mechanics is used outside this area. This work shows that the molecular mechanics method can provide a reliable and yet simple method for determining not only the shear properties of SLGS but also its mode III fracture toughness in the armchair and the zigzag directions; the determined mode III fracture toughness values of SLGS are $0.86MPa{\sqrt{m}}$ and $0.93MPa{\sqrt{m}}$, respectively.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.2
• /
• pp.189-197
• /
• 1994

Analytic methods for Cr(VI) level in industrial hygienic field were suggested by the National Institute for Occupational Safety and Health(NIOSH method 7600, 7604). There were growing needs for measurement of Cr(III) and Cr(VI) levels simultaneously. Two analytical methods were suggested to determine Cr(III) and Cr(VI) levels simultaneously. The one is method by using reversed phase high peformance liquid chromatography(HPLC) and the other is by using ion exchange HPLC. The purpose of this work was to evaluate the usefulness of these two analytic methods. For the difference of ionic charges of Cr(III)-ethylendiamine tetraacetic acid(EDTA) chelate and $CrO_4{^-2}$, we could detect them simultaneously by ion exchange HPLC. Also, we attempted to determine the levels of Cr(III) and Cr(VI) chelated with sodium diethyldithiocarbamate(NaDDTC) by using reversed phase HPLC. The confirmation of Cr(III) and Cr(VI) were checked by fraction collector and nameless atomic absorption spectrometer. The optimal conditions for the formation of Cr(III)-EDTA chelate were two hours incubation period with pH 5. Cr(III)-EDTA and Cr(VI) in EDTA solution were successfully separated by anion exchange column using $Na_2CO_3/NaOH$ mixture as mobile phase. Peaks of Cr(III)-EDTA and Cr(VI) in EDTA were identified at 5 minutes and 7 minutes of retention time respectively by the ion exchange HPLC. The formation of Cr(III)-NaDDTC and Cr(VI)-NaDDTC chelates were twelve hours incubation period. Cr(III)-NaDDTC and Cr(VI)-NaDDTC chelates were separated by reversed phase column using methanol and water mixture as mobile phase. Peaks of Cr(VI)NaDDTC and Cr(III)-NaDDTC chelates were identified at 13 minutes and 26 minutes of retention time respectively by the reversed phase HPLC. Due to reduction of Cr(VI) to Cr(III), it seems to be not suitable for simultaneous determination of Cr(III)-NaDDTC and Cr(VI)-NaDDTC chelates by reversed phase HPLS. Simultaneos determination of Cr(III) and Cr(VI) by ion exchange HPLC was more accurate and simple method.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.74-80
• /
• 2005

The effective removal of turbid-inducing particulates and algae-inducing phosphorous was systematically investigated by the variation of physico-chemical parameters such as pH, alkalinity, and coagulant types. Al(III)-based and Fe(III)-based coagulants exhibited high removal efficiency of turbidity and phosphorous at optimal pH ranges of 7~9, in which zeta potential nearly approached to zero. The removal rate of turbidity rapidly increased with the increase of coagulant dosages, whereas the removal rate of phosphorous gradually increased due to an equivalent reaction of phosphorous with metallic ions. The generation of flocs during coagulation was visualized by high speed camera (Motion Scope 2000, Redlake Co.), and the images of singular flocs were captured by optical microscope. The flocs generated by Fe(III)-based coagulant was more compact than those induced by Al(III)-based coagulant, and the settlabiltiy of Fe(III)-induced flocs was superior to that of Al(III)-induced flocs.

• The Journal of Korean Physical Therapy
• /
• v.25 no.5
• /
• pp.266-272
• /
• 2013

Purpose: The purpose of this study was to determine the influence of whole body vibration (WBV) exercise on balance and lower extremity muscle activity according to different intensity of vibration in stroke patients. Methods: Thirty subjects were randomly divided into three groups: experimental group II (n=10), III (n=10), and control group I (n=10). Each subject was exposed to three WBV conditions, as follows: 1. no WBV (group I), 2. 10 Hz (group II), 3. 30 Hz (group III) in semi squat position. The exercise program was conducted for six weeks (five times per week; 16 minutes per day). Subjects were measured on balance (limited of stability: LOS) and lower extremity muscle activity. Results: Significant difference in balance and lower extremity muscle activity was observed in the experimental group (II, III), compared with the control group (I). Results of post-hoc analysis, showed a significant difference in balance (LOS) in on group II and group III compared with group I, but no significant difference in on group II compared with group III, and a significant difference in lower extremity muscle activity in on group II and group III compared with group I, and a significant difference on in group II compared with group III. Conclusion: WBV exercise may be helpful in improvement of balance and lower extremity muscle activity in stroke patients.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.3
• /
• pp.75-86
• /
• 2004

KSR-III is the first Korean sounding rocket propelled by a liquid propellant propulsion system and it has been developed over 5 years using purely domestic technologies. The propulsion system of KSR-III is a 13-ton class see-level thrust liquid rocket engine(LRE) which utilizes liquid oxygen and kerosene for its propellants and employed pressurized propellant feeding and ablative cooling system. The problem of combustion instabilities which has brought the most difficulty in the development was resolved by implementation of a baffle. Through the development of KSR-III LRE, meaningful achievements have been made in the core technologies of LRE such as design of injectors and combustion chambers and test, evaluation, and control of combustion instabilities. The acquired technologies will be applied to the development of higher performance LREs necessary for future space development programs such as Korean Small Launch Vehicles(KSLV) In this paper, the development of KRE-III LRE system is described including its design, analyses. performance tests and evaluation.

• The korean journal of orthodontics
• /
• v.27 no.2
• /
• pp.209-219
• /
• 1997

This investigation was designed to analyze the degree of dental compensation according to horizontal components of craniofacial skeleton and to investigate correlation between dental compensation and craniofacial pattern in skeletal class III malocclusion. The material selected for this study consisted of standard lateral cephalogram of 59 subjects in normal occlusion group, 91 subjects in mild skeletal class III malocclusion group and 58 subjects in severe skeletal class III malocclusion group. The mild skeletal class III malocclusion group was divided into two groups, one was class III malocclusion without anterior crossbite group and the other was class III malocclusion with anterior crossbite group. The data were analyzed by Quick-ceph image program. The results were as follows. 1. Mild skeletal class III malocclusion without anterior crossbite group showed the most labial inclination of upper incisors, followed by severe skeletal class III malocclusion group and mild skeletal class III malocclusion with anterior crossbite group, the Latter showing the least. The amount of lingual inclination of lower incisors was the largest in severe skeletal class III malocclusion group, and there was no statistically significant difference between mild skeletal claw III malocclusion without anterior crossbite group and mild skeletal class III malocclusion with anterior crossbite group. 2. There were little differences in vertical skeletal structure between mild skeletal class III malocclusion without anterior crossbite group and mild skeletal class III malocclusion with anterior cwssbite group, they showed statistically significant differences in the upper incisors measurements. 3. The measurements of lower incisors in mild skeletal class III malocclusion without anterior crossbite group and upper incisors in mild skeletal class III malocclusion with anterior crossbite group represented a high correlation with skeletal structure. Especially, ∠IMPA and ∠FMIA of lower incisor measurements, and ∠U1-FH ∠U1-SN of upper incisor measurements showed high correlation with skeletal structure in each group. 4. ∠IMPA and ∠FMIA of lower incisor measurements showed high correlation with skeletal structure in all groups. ∠U1-FH, ∠U1-SN and U1-facial plane(mm) of upper incisor measurements represented higher correlation with skeletal structure than any other upper incisor measurements.

• Analytical Science and Technology
• /
• v.8 no.1
• /
• pp.55-62
• /
• 1995

Tetradentate Schiff base cobalt(II) complexes such as $Co(II)_2-N$, N-bis(salicylidene)-m-phenylendiimine; [$Co(II)_2(SMPD)_2(H_2O)_4$] and $Co(II)_2-N$, N-bis(salicylidene)-p-phenylendiimine: [$Co(II)_2(SPPD)_2(H_2O)_4$], and oxygen adducted cobalt (III) complexes such as [$Co(III)_2O_2(SMPD)_2(Py)_2$] and [$Co(III)_2O_2(SPPD)_2(Py)_2$] in pyridine solutions were synthesized. It was identified that the oxygen adducted cobalt(III) complexes have hexacoordinated octahedral configuration with pyridine and oxygen from the measurement of elemental analysis, AA, IR spectra, and TGA. The redox processes were investigated for the oxygen adducted complexes in 0.1M TEAP-pyridine solution, using cyclic voltammetry on the glassy carbon electrode. The redox processes of oxygen adducted Co(III) complexes result in $$[Co(III)_2-O_2-CO(III)]\rightarrow^{e^-}[Co(III)-O_2-Co(II)]\rightarrow^{e^-}[Co(II)-O_2-Co(II)]\rightleftarrows^{e^-}[Co(II)+Co(II)+O_2{\cdot}^-]\rightleftarrows^{e^-}[Co(II)+Co(I)+O_2{\cdot}^-]\rightleftarrows^{e^-}[Co(I)+Co(I)+O_2{\cdot}^-]$$.

• Journal of Science Education
• /
• v.35 no.1
• /
• pp.91-101
• /
• 2011

In this study, Jigsaw III cooperative learning strategy and traditional learning strategy have been applied to the 'electricity' chapter of grade 8 science textbooks to know the effects of learning strategy, gender, and GPA on the students' science achievement and science learning attitude of middle school female students in gender-separated classes. For this purpose, 143 students of 4 classes in separated classes were chosen from a middle school in Daegu. One female class and one male class were assigned to the experimental group and other female class and male class were assigned to the control group. Traditional learning strategy was applied to the control group and the Jigsaw III cooperative learning strategy was applied to the experimental group. Four worksheets for expert groups were used for 18 hours through 5 weeks. Both tests for science achievement and learning attitude were administered as pre and post test. The test results were analyzed through analysis of covariance(ANCOVA) as pre test score as covariant The overall conclusions of this study were as follows: The Jigsaw III cooperative learning has improved science achievement, especially on subjective-type questions, of female students and mid-lower level students. The Jigsaw III Cooperative Learning has also improved self-directed attitude toward science learning. Female students have expressed more positive opinion about the Jigsaw III cooperative learning.

• The korean journal of orthodontics
• /
• v.48 no.6
• /
• pp.349-356
• /
• 2018

Objective: This study was performed to investigate the alveolar bone of lower incisors in skeletal Class III adults of different vertical facial patterns and to compare it with that of Class I adults using cone-beam computed tomography (CBCT) images. Methods: CBCT images of 90 skeletal Class III and 29 Class I patients were evaluated. Class III subjects were divided by mandibular plane angle: high (SN-MP > $38.0^{\circ}$), normal ($30.0^{\circ}$ < SN-MP < $37.0^{\circ}$), and low (SN-MP < $28.0^{\circ}$) groups. Buccolingual alveolar bone thickness was measured using CBCT images of mandibular incisors at alveolar crest and 3, 6, and 9 mm apical levels. Linear mixed model, Bonferroni post-hoc test, and Pearson correlation analysis were used for statistical significance. Results: Buccolingual alveolar bone in Class III high, normal and low angle subjects was not significantly different at alveolar crest and 3 mm apical level while lingual bone was thicker at 6 and 9 mm apical levels than on buccal side. Class III high angle group had thinner alveolar bone at all levels except at buccal alveolar crest and 9 mm apical level on lingual side compared to the Class I group. Class III high angle group showed thinner alveolar bone than the Class III normal or low angle groups in most regions. Mandibular plane angle showed negative correlations with mandibular anterior alveolar bone thickness. Conclusions: Skeletal Class III subjects with high mandibular plane angles showed thinner mandibular alveolar bone in most areas compared to normal or low angle subjects. Mandibular plane angle was negatively correlated with buccolingual alveolar bone thickness.