• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.525-532
• /
• 1998

In this study, dynamic characteristics of catenary that supplies electrical power to high-speed trains is investigated. A particular emphasis is placed on the effect of droppers on the dynamic response of the contact wire, a dropper is an element that connects the contact wire with the messenger wire so as to maintain near uniform compliance, Finite element model compressing 3 spans is constructed. For the linear model, droppers are modeled as linear springs with various stiffness values. Modal analysis is performed to obtain the natural frequencies and modes and the variation in the modal density distribution for changing stiffness values are noted. Impulse response is also obtained through computer simulation. In practice, dropper is a nonlinear element with low stiffness in compression and high stiffness in tension. Hence, dropper can be modeled as a nonlinear spring with hi-directional stiffness values. Impulse and harmonic responses are obtained for the nonlinear model through simulation. The responses aye also compared with the linear cases.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.545-546
• /
• 2006

This study was performed to investigate the surface properties of electrochemically oxidized pure titanium by anodic spark discharging method. Commercially pure titanium plates of $10{\times}20{\times}1[mm]$ in dimensions were polished sequentially emery paper. Anodizing was performed at current density of $76.2\;[mA/cm^2]$, application voltage of 290, 350, 400 [V] using a regulated DC power supply, which allowed automatic transition constant current when a preset maximum voltage has been reached. The Ti surface oxided films was characterized by scanning electron microscope(SEM). The precipitation of HA(Hydroxyapatite) crystals on anodized surface was greatly accelerated by hydrothermal treatment. The concentrations of DL-$\alpha$-Glycerolphosphate Magnesiurn(DL-$\alpha$-GP-Mg) salt and Ca acetate in an electrolyte was highly affected the precipitation of HA crystals converted by Ti Anodized oxide films by Shape of Impulse Voltage.

• Steel and Composite Structures
• /
• v.51 no.1
• /
• pp.1-8
• /
• 2024

Transient dynamic behavior of a sandwich beam under thermal and impulsive loads has been researched in the context of higher-order beam theory. The impulse load of blast type has been enforced on the top exponent of the sandwich beam while it is in a thermal environment. The core of the sandwich beam is cellular with auxetic rectangular pattern, whereas the layers have been built with the incorporation of graphene oxide powder (GOP) and are micromechanically introduced through Halpin-Tsai formulization. Governing equations for the sandwich beam have been solved through inverse Laplace transform style for obtaining the dynamical deflections. The connection of beam deflections on temperature variability, GOP quantity, pulse load situation and core relative density has been surveyed in detail.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.4
• /
• pp.255-261
• /
• 2020

This study proposes a method of constructing an effective shock absorber. The existing shock absorber is fabricated only with polyethylene; however, the new shock absorber comprises polyethylene on the outside and a high-density material on the inside. The shock was mostly reduced when the density difference between the inner and outer materials was large. Aluminum, titanium, and copper were chosen as the outer structure of two-layer. Shock reduction was most effective in copper with the highest density, and the maximum deceleration was reduced by 43% while the impulse was reduced by 51% in the proposed shock absorber than the traditional shock absorber. In the cases of four-layer and six-layer shock absorbers, the impulse was reduced, but the maximum deceleration was increased. The fuze must survive from the biggest shock and the remaining shock waves should not exceed the threshold. Thus, a two-layer structure shock absorber using polyethylene-copper was proposed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.3
• /
• pp.629-635
• /
• 2017

In this paper, we proposed a nonlinear synthesis filter for noise reduction to reduce the effects of Gaussian noise and impulse noise. When the centralization of the local mask is judged to be Gaussian noise by the noise judgment, the weight value of the weight filter are applied differently according to the spatial weight filter and the pixel change by using the sample variance in the local mask. And if it is determined as the impulse noise, we proposed an algorithm that applies different weights of local histogram weight filter and standard median filter according to noise density of mask. In order to evaluate the performance of the proposed filter algorithm, we used PSNR(peak signal to noise ratio) and compared existing methods and proposed filter algorithm in the mixed noise environment with Gaussian noise, impulsive noise, and two noises mixed.

• Composites Research
• /
• v.29 no.3
• /
• pp.91-97
• /
• 2016

In this paper, impulse-momentum theory was coupled to a constitutive equation both for implementing quasi-static and impact characteristics of EPP (Expanded polypropylene). Also, parameters which have physical meanings were expressed as functions of relative density. Simultaneous nonlinear Newton-Raphson method was applied to find the proper values for parameters in the constitutive equation along with quasi-static test data. Results from the impulse-momentum theory coupled constitutive equation showed good agreement with experimental data and the potential to be applied to different material type polymeric foam.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.4
• /
• pp.135-140
• /
• 2014

As the digital image devices are widely used, interests in the software- and the hardware-related image processing become higher and the image processing techniques are applied in various fields such as object recognition, object detection, fingerprint recognition, and etc. For the edge detections Sobel, Prewitt, Laplacian, Roberts and Canny detectors are used and these existing methods can excellently detect the edges of the images without noise. However, in the images corrupted by the impulse noise, these methods are insufficent in noise elimination characteristics, showing unsatisfactory edge detection. Therefore in this paper, in order to obtain excellent edge detection characteristics in the corrupted image by the impulse noise, an detection algorithm is porposed, which uses the central pixel of mask divided by four regions along the axis, calculates the estimated mask according to the representing pixel values in each regions, and detects the final edges by applying the estimates mask and the new directional one.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.4
• /
• pp.394-400
• /
• 2019

Noise removal is one of the required step in processing digital video and there are many researches to develop algorithm that fits with its purpose and environment. However, present impulse noise removal methods are lacking in its function in terms of removing noise in edge and high frequency factors. Therefore, this research has Extended range of masks depending on density to determine noise so that high frequency factors can be preserved. The range of resolution is set based on median and standard deviation of inside resolution after removing impulse noise. afterwards, those resolution within the range are calculated by adding weight to have the final output value. The suggested algorithm has an enhanced function in removing noise in various areas with many edge and high frequency factors than present methods and their functions are compared through simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.5
• /
• pp.675-681
• /
• 2022

Recently, with the development of IoT technology and AI, unmanned and automated in various fields, interest in video processing, which is the basis for automation such as object recognition and object classification, is increasing. Various studies have been conducted on noise removal in the video processing process, which has a significant impact on image quality and system accuracy and reliability, but there is a problem that it is difficult to restore images for areas with high impulse noise density. In this paper proposes a filter algorithm based on partial mask and Lagrange interpolation to restore the damaged area of impulse noise in the image. In the proposed algorithm, the filtering process was switched by comparing the filtering mask with the noise estimate and the purge weight was calculated based on the low frequency component and the high frequency component of the image to restore the image.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.776-779
• /
• 2002

This paper describes the magnetizer design of highly saturated magnetic circuit by high external field. The magnetizer is loaded by a capacitor bank with impulse currents to reach high magnetic flux-density(typically 5[T]). Magnetizing current come out from magnetizing system is simulated by analytic method and transient FEM, also field distributions of the magnetizer are analyzed.