• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.318-321
• /
• 2007

This paper is concerned with improvement of surface quality of a sheet metal member in the stamping process. The CAE procedure of the stamping process is utilized in order to investigate cause of surface troubles and to improve surface quality. A complicated shape of the sheet metal member can induce surface troubles such as wrinkles because of insufficient tensions force and non-uniform contact of a blank sheet with tools. This paper proposes two guidelines such as a change of tool shape and added draw-beads on the tool surface in order to increase tension forces and to induce uniform contact. The proposed guidelines are verified with the CAE of the stamping process. The CAE results show that the changed shape of tools and added draw-beads can reduce the amount of wrinkles and improve surface quality.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.195-198
• /
• 2007

The present work focuses on the prediction of birefringence in injection-molded plastic part and its improvement by rapid mold heating. To calculate birefringence, flow-induced residual stress is computed through a fully three-dimensional injection molding analysis. Then the stress-optical law is applied from which the order of birefringence can be evaluated and visualized. The birefringence patterns are predicted for a rectangular plate with a variation of mold temperatures, which shows that the amount of molecular orientation and birefringence level decreases with an increase of mold temperature. The effect of mold temperature on the order of birefringence is also studied for a thin-walled rectangular strip, and compared with experimental measurements. Both predicted and experimental patterns of birefringence are in agreements on the observation that the birefringence level diminishes significantly when the mold temperature is raised to above the glass transition temperature.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(4)
• /
• pp.106-109
• /
• 2000

There have been proposed two types of low bit rate vocoder upto now : One is MBE type using the spectrum modeling and another is CELP type using the hybrid coding method. CELP type vocoder has mainly studied between them. Specially, much of intensity is concentrated in CELP vocoder due to the emergence of Internet Phone and PCS in a domestic. In order to improve the speech quality in CELP vocoder, in this paper, we proposed a new spectrum analysis algorithm with variable window, In CELP vocoder, the spectrum of the synthesised speech signal is distorted because the fixed size windows is used for spectrum analysis. So we have measured the spectral leakage and in order to minimize the spectral leakage have adjusted the window size. Applying this method G.723.1 ACELP, we can get SD(Spectral Distortion) reduction 0.084(dB), residual energy reduction 6.3% and MOS(Mean Opinion Score) improvement 0.1.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.155-161
• /
• 1998

Recently, there are widely needs of small scale electrostatic precipitator(ESP) in machine shop and other factories. Since the space of such factories is limited, the improvement of collection efficiency is predominant subject. In this study, we examine the influence of distribution of wind velocity and oil mist concentration inside the ESP in order to improve the performance of the ESP. The distribution of wind velocity and mist concentration is measured respectively in a cross-sectional plane of the ESP. The former is controlled by using a louver which is placed in front of an ionizer and the latter is controlled by lengthening the pipe of entrance of the ESP in order to have plenty of time that mist is dispersed evenly. It is shown that the uniformity of distribution of wind velocity and mist concentration inside the ESP can be getting by adopting a louver with proper shape and lengthening the pipe of entrance and is also contributed to collection efficiency considerably.

• 한국통신학회논문지
• /
• 제39A권9호
• /
• pp.508-513
• /
• 2014

자기기록 장치의 저장 밀도 향상을 위해 인접한 트랙을 겹쳐서 쓰는 방식이 사용되고 있다. 따라서 인접한 트랙간 간섭으로 인한 성능 저하를 방지하기 위한 많은 연구가 진행되어 왔다. 본 논문에서는 인접한 트랙간 간섭을 해결하기 위해 인접 트랙간 간섭을 제거하는 모델을 제안하였다. 트랙간 겹치는 정도가 10% 이상인 경우 본 논문에서 제안한 모델이 좋은 성능을 보인다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.547-548
• /
• 2008

Linearity improvement technique of transconductor is presented in the paper. In order to certify the linearity improvement of proposed transconductor, the 3rd-order Elliptic low-pass Gm-C filter which provides 5MHz cutoff is implemented by using the transconductor. According to the IIP3 measurement result of filters, proposed filter has higher IIP3 than normal source-degeneration filter; the In-band IIP3 of proposed and normal filter are 10.1 dBm and 7.5 dBm respectively. The filter is fabricated in 1P6M $0.18-{\mu}m$ CMOS while consuming the 3.3mW with 1.8 Vdd. The in-band input-referred noise voltage is $62.3{\mu}Vrms$ and the SFDR is 54.1 dB.

• 한국정밀공학회지
• /
• 제21권10호
• /
• pp.94-101
• /
• 2004

This paper presents the development of a keypad test system for the improvement of working environment and productivity using PTC 16F877 microprocessor. In order to detect the fault of keypad products, hardware and software design is performed in this system. Keypad fault detection system is controlled by the 8 bit one chip PIC microcontroller for the exactness and speed. Developed panel of the keypad test system is comprised of the sub-panel for selecting in the inspected keypad types and the main panel f3r displaying the working order and fault position. Furthermore, all data from keypad inspection are stored in main memory of personal computer for the database. All these functions lead to the improvement of working speed and environment.

• 대한안전경영과학회지
• /
• 제16권3호
• /
• pp.363-368
• /
• 2014

During the fierce competition among the companies, improvement of logistics center managing efficiency is importantly recognized. Among them, studies on improvement of picking work process on about 55% of logistics center managing costs are continuously conducted. And, most of studies focus on analysis on strengths and weaknesses of picking method performable on the stage of logistics center design, etc, so the purposes of this research are to define load location rule by product releasing frequency in logistics managing environment based on conveyer and suggest expected effects by simulation analyzing method to improve picking managing efficiency.

• 대한방사선기술학회지:방사선기술과학
• /
• 제23권1호
• /
• pp.91-96
• /
• 2000

This work was on the reduction of exposure dose and contrast improvement by Use of Heavy Elements Filter From the result of experimental evaluation, it was found that the beam harding of X-ray was not showed in Ho and Gd, heavy elements filters, contrast to Cu and Al filters In which the harding showed. And the ratio of transit dose to surface dose and the load of X-ray tube increase in order of Al, Cu, Gd and Ho, respectively. The contrast of X-ray images using the intensifying screen and the input phosphor showed the higher value in order of Cu, Al, Gd and Ho. Therefore, in the case of using contrast media and phosphor in region of diagnostic radiology, X-ray image quality depends primarily on kVp and heavy elements filters.

• 소성∙가공
• /
• 제16권4호
• /
• pp.229-233
• /
• 2007

The present work focuses on the prediction of birefringence in injection-molded part and its improvement by rapid mold heating. To calculate birefringence, flow-induced residual stress is computed through a fully three-dimensional injection molding analysis. Then the stress-optical law is applied from which the order of birefringence can be evaluated and visualized. The birefringence patterns are predicted for a rectangular plate with a variation of mold temperature, which shows that the amount of molecular orientation and birefringence level decreases with an increase of mold temperature. The effect of mold temperature on the order of birefringence is also studied for a thin-walled rectangular strip, and the relevant results are compared with experimental measurements. Both predicted and experimental patterns of birefringence are in agreements on the observation that the birefringence level diminishes significantly when the mold temperature is raised over the glass transition temperature.