• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.487-499
• /
• 2021

Purpose:The purpose of the paper is to review the problems of performance enhancement of safety certification standards and to suggest directions for improvement in order to rationalize safety certification standards for future industrial development and environmental changes. Method: The problems and limitations of the safety certification system are summarized through literature review and interview with manager, and the status of safety certification standards is classified into design standards, performance standards, and detailed standards, and the status analysis is performed. In addition, by synthesizing the results of the investigation and analysis, improvements are suggested to improve the performance of the safety certification standards. Result: Through the survey, the problems and limitations of safety certification could be grouped into six categories: government-led certification system operation, standardized certification standards, long time required to improve certification, poor certification standards preparation system, and lack of reflection of industry opinions. And, as a result of analyzing the certification standards by dividing them into performance and design standards, in the case of machinery, equipment, and protection devices, the design standards were high at 69.7% and 64.9%, whereas in the case of protective equipment, the performance standards were high at 61.1%. In order to improve the performance of safety certification standards centered on design standards, it is necessary to determine the possibility of performance enhancement of the certification standards and determine the feasibility of the inspection test method. In order to improve performance, it was reviewed that it was necessary to establish a systemic foundation and infrastructure, such as strengthening the Product Liability Act, systematizing market monitoring, etc., distributing certification test tasks, and participating in the preparation of certification standards by the private sector. Conclusion: Through this study, the problems and limitations of Korea's safety certification system were summarized and the necessity for performance improvement was reviewed. Performance improvement of safety certification standards is a matter that requires preparatory work, such as legislative revision and infrastructure construction, and requires mid-to-long-term promotion. In addition, rather than improving the overall safety certification standards, the performance requirements for each item subject to certification should be reviewed and promoted, and details should be specified through additional research.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.1
• /
• pp.108-116
• /
• 2018

Objectives: This study investigated to the analytical work environment, analyst's expert and status of analytical instrument in the designated organization's laboratory for measuring work environment, and carried out to ensure reliability of analytical results. Methods: This study was conducted by 114 analysts who work in designated organization's laboratory for measuring work environment. Information on the working environment and personal characteristics of the analysts were collected using a self-reported questionnaire and were analyzed using the SPSS program through analysis of frequency and t-test. Results: The speciality of subjects was occupational health(57.0%), environmental health(38.6%) and environmental engineering(4.4%), and they had a higher level of academic ability than workers in other industries. Analysts had to handle a large number of sample analysis and many tasks other than analytical work. The analysts answered that it was difficult to analyze organic substances than inorganic substances, and the difficult parts were the analytical methods setting of new substances(55.3%), instrument analysis(24.6%) and principle of analysis(23.7%). Analytical instruments mainly have legally required instruments. The difficulty of the analysis is solved from the senior analyst in the laboratory and analytical information is mainly exchanged through seminar organized by the Association of Occupational Health Analysts. The analysts who are planning to move or considering the company were 48.2%, and the reasons for moving the company were difficult to work(14.0%), low salary(9.6%), employment type(8.8%) and job stress(7.0%). Conclusions: The conclusions of our study were that it was possible to secure reliability by solving the problems such as implementing professional education to improve expertise of analysts, strengthening analytical instruments through institutional improvement and improving work environment.

• Journal of environmental and Sanitary engineering
• /
• v.7 no.2
• /
• pp.1-10
• /
• 1992

Since 1960's along with industrialization and urbanization, economic growth has been . achieved, however, at the same time, environmental condition has been seriously deteriorated. . Currently, volume of wastewater has been increasing at annual rate of 7% in sewage and 20% in industrial wastewater. However, the nation's sewage treatment serves only 33% of the municipal wastewater as of 1991. Major portion of air pollutants comes from combustion of oil and coal which comprise 81% of total energy use and emission gases from motor vehicles increasing at an accelerated rate. It is known that Korea generates the highest amount of waste per capta. Nevertheless, it is not sufficient to reduce the volume of waste by means of resources recovery and recycling. Recognizing the importance of global environmental problems such as ozone layer depletion, global warming and acid rain, international society has been making various efforts since the 1972 Stockholm conference. In particular, it is expected that the Rio conference which has adopted the Rio declaration and Agenda 21 will form a crucial turning point of the emerging new world order after the Cold War confrontation. To cope with such issues as domestic pollution and global environmental problems, the fundamental national policy aims at harmonizing "environmental protection and sustainable development". The Ministry of Environment has recently set up a mid-term comprehensive plan which includes annual targets for environmental protection. According to the government plan, gradual improvement of various environmental conditions and specific measures to achieve them is planned in time frame. Additional sewage treatment plants will be constructed in urban areas with the target to treat 65% of the nation's municipal sewage by 1996. Supply of clean fuels such as LNG will also be expanded starting from large cities as a cleaner substitute energy for coal and oil. In parallel with expansion of LNG, emphasis will be placed on installation of stack monitoring system. Due to the relatively limited land, government's basic policy for solid waste treatment is to develop large scale landfill facilities rather than small sized ones. Thirty three regional areas have been designated for the purpose of waste management. For each of these regions, big scale landfill site is going to be developed. To increase the rate of waste recycling the government is planning to reinforce separate collection system and to provide industries with economic incentives. As a part of meeting the changing situation on global environmental problems after UNCED, and accommodation regulatory measures stipulated in the global environmental conventions and protocols, national policy will try to alter industrial and economic structure so as to mitigate the increasing trends of energy consumption, by encouraging energy conservation and efficiency. In this regard, more attention will be given to the policy on the development of the cleaner technology. Ultimately, these policies and programs will contribute greatly to improving the current state of national public health.

• Journal of Internet Computing and Services
• /
• v.14 no.4
• /
• pp.63-72
• /
• 2013

Business Process Intelligence (BPI) is one of the emerging technologies in the knowledge discovery and analysis area. BPI deals with a series of techniques from discovering knowledge to analyzing the discovered knowledge in BPM-supported organizations. By means of the BPI technology, we are able to provide the full functionality of control, monitoring, prediction, and optimization of process-supported organizational knowledge. Particularly, we focus on the focal organizational knowledge, which is so-called the BPM activity-performer affiliation networking knowledge that represents the affiliated relationships between performers and activities in enacting a specific business process model. That is, in this paper we devise a statistical analysis method to be applied to the BPM activity-performer affiliation networking knowledge, and dubbed it the activity-performer correspondence analysis method. The devised method consists of a series of pipelined phases from the generation of a bipartite matrix to the visualization of the analysis result, and through the method we are eventually able to analyze the degree of correspondences between a group of performers and a group of activities involved in a business process model or a package of business process models. Conclusively, we strongly expect the effectiveness and efficiency of the human resources allotments, and the improvement of the correlational degree between business activities and performers, in planning and designing business process models and packages for the BPM-supported organization, through the activity-performer correspondence analysis method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.288-290
• /
• 2022

As part of the SOC digitization for smart water management and flood prevention, the government reported that automatic and remote control system for drainage facilities (180 billion won) to 57% of national rivers and established a real-time monitoring system (30 billion won). In addition, they were also planning to establish a smart dam safety management system (15 billion won) based on big data at 11 regions. Therefore, research is needed for smart water management and flood prevention system that can accurately calculate the flow rate through real-time flow rate measurement of rivers. In particular, the most important thing to improve the system implementation and accuracy is to ensure the accuracy of real-time flow rate measurements. To this end, radar sensors for measuring the flow rate of electromagnetic waves in the United States and Europe have been introduced and applied to the system in Korea, but demand for improvement of the system continues due to high price range and performance. Consequently, we would like to propose an improved flow rate measurement and flood forecast system by developing a radar sensor for measuring the electromagnetic surface current meter for real-time flow rate measurement.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.4
• /
• pp.227-234
• /
• 2007

The present study attempts to provide basic directions to respond to sea-level rise effectively based on the status of sea-level rise and its impact. The impact of the sea-level rise will be one of the most adverse component among climate change due to global warming. The basic approach to deal with sea level rise requires both mitigation and adaptation. Though the emission reduction can reduce a portion of sea level rise, the rising trend cannot be avoided due to the difficulty of the emission reduction and a strong inertia of the ocean. Therefore an effective corresponding direction has to focus on the development of appropriate adaptation strategies. Because sea level rise problem has scientific uncertainty, the corresponding system has to be designed to deal with the processes of information and awareness, planning and design, implementation, and monitoring and evaluation in continuous and long-term process. The future task to correspond effectively to the issue in Korea includes the improvement of scientific information, the development of adaptative measures, the enhancement of people awareness, the consensus of corresponding necessity, and formation of integrated corresponding system.

• Journal of Wetlands Research
• /
• v.17 no.4
• /
• pp.348-358
• /
• 2015

Impacts of climate change are being observed in the globe as well as the Korean peninsula. In the past 100 years, the average temperature of the earth rose about 0.75 degree in celsius, while that of Korean peninsula rose about 1.5 degree in celsius. The fifth Assessment Report of IPCC(Intergovermental Panel on Climate Change) predicts that the water pollution will be aggravated by change of hydrologic extremes such as floods and droughts and increase of water temperature (KMA and MOLIT, 2009). In this study, future runoff was calculated by applying climate change scenario to analyze the future water quality for each targe period (Obs : 2001 ~ 2010, Target I : 2011 ~ 2040, Target II : 2041 ~ 2070, Target III : 2071 ~ 2100) in Hongcheon river basin, Korea. In addition, The future water quality was analyzed by using multiple linear regression analysis and artificial neural networks after flow-duration curve analysis. As the results of future water quality prediction in Hongcheon river basin, we have known that BOD, COD and SS will be increased at the end of 21 century. Therefore, we need consider long-term water and water quality management planning and monitoring for the improvement of water quality in the future. For the prediction of more reliable future water quality, we may need consider various social factors with climate components.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.3
• /
• pp.12-21
• /
• 2020

This study aims to implement the Sustainability Evaluation Framework of Korea Natural Parks to county parks in Gyeongsangnam-do, and to review the performance status of management effectiveness evaluation (MEE) and identify factors that influence the improvement of management effectiveness in protected areas. County park officers evaluated current management using this framework that was developed based on the MEE framework designed by the Korean Ministry of Environment. Among the principal values of county parks, 'natural and ecological' is indicated as the most important, followed by 'cultural and historic value' and 'leisure and recreation'. Natural disasters and climate change, visitor impact-inappropriate visitor behavior are indicated as current threats, and three county parks administrators viewed that there was no particular threat to their park. According to MEE results, the most effective management fields were 'State of cultural and historic value', 'State of leisure and recreational value', 'Current state of principal value'. The comparatively weaker fields were 'Threatened species management', 'Invasive species management', 'Management monitoring and evaluation'. The effects of sustainable management on county parks were analyzed through a regression analysis, and the influence of management factors reveal 'Annual budget', will impact attaining higher management scores. This study presents the current management information about county parks and provides support for the basis for the planning of county parks in Korea, suggesting the influencing factor.

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.277-278
• /
• 2001

The successful operation of a product In service depends upon the effective provision of logistic support in order to achieve and maintain the required levels of performance and customer satisfaction. Logistic support encompasses the activities and facilities required to maintain a product (hardware and software) in service. Logistic support covers maintenance, manpower and personnel, training, spares, technical documentation and packaging handling, storage and transportation and support facilities.The cost of logistic support is often a major contributor to the Life Cycle Cost (LCC) of a product and increasingly customers are making purchase decisions based on lifecycle cost rather than initial purchase price alone. Logistic support considerations can therefore have a major impact on product sales by ensuring that the product can be easily maintained at a reasonable cost and that all the necessary facilities have been provided to fully support the product in the field so that it meets the required availability. Quantification of support costs allows the manufacturer to estimate the support cost elements and evaluate possible warranty costs. This reduces risk and allows support costs to be set at competitive rates.Integrated Logistic Support (ILS) is a management method by which all the logistic support services required by a customer can be brought together in a structured way and In harmony with a product. In essence the application of ILS:- causes logistic support considerations to be integrated into product design;- develops logistic support arrangements that are consistently related to the design and to each other;- provides the necessary logistic support at the beginning and during customer use at optimum cost.The method by which ILS achieves much of the above is through the application of Logistic Support Analysis (LSA). This is a series of support analysis tasks that are performed throughout the design process in order to ensure that the product can be supported efficiently In accordance with the requirements of the customer.The successful application of ILS will result in a number of customer and supplier benefits. These should include some or all of the following:- greater product uptime;- fewer product modifications due to supportability deficiencies and hence less supplier rework;- better adherence to production schedules in process plants through reduced maintenance, better support;- lower supplier product costs;- Bower customer support costs;- better visibility of support costs;- reduced product LCC;- a better and more saleable product;- Improved safety;- increased overall customer satisfaction;- increased product purchases;- potential for purchase or upgrade of the product sooner through customer savings on support of current product.ILS should be an integral part of the total management process with an on-going improvement activity using monitoring of achieved performance to tailor existing support and influence future design activities. For many years, ILS was predominantly applied to military procurement, primarily using standards generated by the US Government Department of Defense (DoD). The military standards refer to specialized government infrastructures and are too complex for commercial application. The methods and benefits of ILS, however, have potential for much wider application in commercial and civilian use. The concept of ILS is simple and depends on a structured procedure that assures that logistic aspects are fully considered throughout the design and development phases of a product, in close cooperation with the designers. The ability to effectively support the product is given equal weight to performance and is fully considered in relation to its cost.The application of ILS provides improvements in availability, maintenance support and longterm 3ogistic cost savings. Logistic costs are significant through the life of a system and can often amount to many times the initial purchase cost of the system.This study provides guidance on the minimum activities necessary to Implement effective ILS for a wide range of commercial suppliers. The guide supplements IEC60106-4, Guide on maintainability of equipment Part 4: Section Eight maintenance and maintenance support planning, which emphasizes the maintenance aspects of the support requirements and refers to other existing standards where appropriate. The use of Reliability and Maintainability studies is also mentioned in this study, as R&M is an important interface area to ILS.

• Korean Journal of Occupational Health Nursing
• /
• v.6 no.2
• /
• pp.144-155
• /
• 1997

In December 1990, Occupational Safety and Health Law was amended to reinforce employer's responsibilities on employees' health and safety. Among the amended law it was important to expand the role of an occupational health nurse to the role of an occupational health manager. An occupational health manager should take charge of coordinating periodic health examination and environmental hazard evaluation, providing primary care, monitoring employees' health status, giving the workplace walk-through, selecting safe protection equipment, providing health information, counseling and health education, independently. This position of occupational health nurse is equivalent to the role of doctors or occupational hygienists. In 1991, government made a master plan to prevent occupational disease and injury. Under the plan, Korea Industrial Nursing Association (KINA) was established in 1994 with the purpose of improving health services and upgrading career opportunities for members. Therefore, this study was designed to analyze the transition of occupational health nursing education with the changes of law and policy in Korea between 1991 and 1996. In details, it was to analyze the rate of school providing occupational health nursing practice based lecture, lecture hours, lecture contents in undergraduate curriculum, program contents of graduate school, kinds of continuing education, etc. For this purpose, we conducted survey two times. In February 1991, baseline study was conducted with all nursing programs in Korea (19 BSN programs and 43 nursing departments of junior college). From April to May in 1996, the second survey was conducted with all nursing programs (38 BSN programs and 69 junior colleges). The first response rate was 66.1% and the second was 40.6%. Structured questionnaires were mailed to the deans or the community health nursing faculties. In the case of graduate school, telephone survey was conducted with 10 school of public health or environmental health area. Data from the yearbook of Industrial Safety Training Institute (ISTI), the history of Korea Industrial Health Association, and the journals of KINA were also included in the analysis. As the results, we found that there were remarkable improvement in undergraduate and graduate programs, obligatory as well as voluntary continuing education in terms of occupational health nursing expertise between 1991 and 1996. 1) The number of school providing occupational health nursing practice-based lecture was increased with the rate from 7.3% to 25.6%. The rate of school giving over 15 class-hours was increased from 33.3% to 46.6%. 2) Content areas were composed of introduction of occupational health, occupational epidemiology, industrial hygiene, occupational disease and injury, law and policy, health education, concept of occupational health nursing, role of occupational health nurse, occupational health nursing process, etc. Of content areas, occupational health nursing process was more emphasized with the increased rate from 43.9% to 88.4%. 3) In the case of graduate school, occupational health programs were increased from 4 to 10. One of them has developed occupational health nursing program as an independent course since 1991. 4) The law increased educational hours from 28 hours to 36 hours for introductory course at the time of appointment, and from 14 hours to 24 hours every 2 years for continuing education. Course contents were Occupational safety and health law, introduction of occupational health, health education methodology, planning and evaluation, periodic health exam, occupational disease care, primary care, emergency care, management, industrial environment evaluation, etc. In 1996, Korea Industrial Nursing Association has begun to provide continuing education after Industrial Safety Training Institute. 5) Various educational programs in voluntary base were developed such as monthly seminar, CE articles, annual academic symposium, etc. It was shown that changes of law and policy led rapid growth of occupational health nursing education in various levels. From this trend, it is expected that occupational health nurse expertise be continuously to be enhanced in Korea. Legal and political supports should proceed for the development of occupational health nursing in early stage.