• Journal of Environmental Impact Assessment
• /
• v.4 no.3
• /
• pp.9-13
• /
• 1995

In July 1993 a new prescription of the EC was finished, concerning the voluntary participation of enterprises in a common auditing system. By this in the EC-member countries there must be founded centers of environmental auditing where experienced experts of environmental auditing should be accredited. These accredited experts are controllers for evaluating and certification of carried out environmental-auditings. An environmental-auditing practically represents an environmental assessment for an already existing enterprise with establishing corresponding programmes and strategies for the internal management to improve the environmental relations. Much experiences, which could be collected in the field of EIA during the last years may be transfered to this new task immediately. Only an essential difference there should not be overseen because of national legislation EIA in the defined cases must be carried out. By the EC-prescription carrying out an environmental-auditing for an enterprise is optional, it is recommended only. It was not introduced as a must. In spite of this fact because of the hard competition on the market there will be developed a pressure for the enterprises, to carry out such environmental-auditings. At present already a number of first projects in this direction can be seen, in the first line above all enterprises with the necessary economic power want to use this possibility, to gain better positions on the market. We have already gathered the first experiences in this field. We arranged corresponding contacts to several enterprises within the surroundings of Dresden. Within an opening discussion, where the project is explained and discussed with the management of the enterprise very detailed, the understanding, the readiness and the cooperation for the project are generated necessary prerequesits for the success of the whole work. By means of careful detail-work in collaboration with all departments and on all levels of the enterprise the total mass and energy-balances of the factory established and analysed. There are included also such ranges like material delivery, personal policy, public relations and sale as well as waste management. It is important that all people working in the factory have the feeling to be our partners, and not to have the impression to be checked or controled by an outside organization. This one of the most important factors of environmental auditing, in order to wake up and to develop a common interest on all sides. At the end of the environmental auditing there will be according to the prescription of the EC a catalogue of measures to do immediately, short time, mean time and long time for improvement of the environmental situation of the enterprise. All proposals are made in connection with a corresponding economic evaluation. These measures and programmes are declared as the environmental manual and are the basis for the work of the environmental management of the enterprise for the next three years. According to the EC-prescription, the enterprise with this environmental manual can get a corresponding certificate, which may be used for public relation purposes.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.1
• /
• pp.166-182
• /
• 1998

The purposes of this study are to evaluate the Korean mandibular dental arch and classify the mandibular dental arch shape and size based on the incisal angle, canine angle, inter second molar width and height. In this study the mandibular study models were fabricated using irreversible hydrocolloid impression material from 225 volunteers with a mean age 23.62 (range 19-29). And the study models were measured with 3-dimensional measuring device and the mandibular dental arch was classified by means of K-means clustering method and visual inspection, then obtained data were analyzed with t-test for the statistical analysis. The results were as follows ; 1. The average canine height was 5.19mm(s.d. 1.17) in both sex, 5.34mm in male, and 4.95mnm in female. And the sexual difference was significant($0). 2. The average second molar height was 39.81mm(s.d. 2.44) in both sex, 40.19mm in male, and 39.21mm in female. And the sexual difference was significant($0). 3. The average inter-canine width was 27.16mm(s.d. 1.78) in both sex, 27.41mm in male, and 26.77mm in female. And the sexual difference was significant($0). 4. The average inter-first molar width was 46.93mm(s.d. 2.67) in both sex, 47.72mm in male, and 45.7mm in female. And the sexual difference was significant($0). 5. The inter-second molar width was average 56.09mm(s.d. 3.01) in both sex, 57.24mm in male, and 54.32mn in woma. And the sexual difference was significant($0). 6. The arch form was classified into three shapes based on the incisal and canine angle. V-shape showed $124.88^{\circ}$ of incisal angle and $141.64^{\circ}$ of canine angle, U-shape showed $152.76^{\circ}\;and\;125.35^{\circ}$, and O-shape showed $138.03^{\circ}\;and \;33.66^{\circ}$ respectively. Each shape distribution was that the V-shape was 14.2%, the U-Shape was 14.7%, and the O-shape was 71.1% of the 225 study models. 7. It was thought that the use of second molar width is more reasonable than height for classifying the dental arch size. The arch size was classified into four sizes based on the second molar width. Size 1 showed range of 42.24-48.23mm, size 2 showed 48.24-54.23mm, size 3 showed 54.24-60.23mm, and size 4 showed 60.24-66.23mm respectively. Each arch size distribution was that the size 1 was 1.3%, the size 2 was 27.1%, the size 3 was 63.6%, and the size 4 was 8.0% of the 225 study models.

• Journal of The Korean Association of Information Education
• /
• v.6 no.1
• /
• pp.86-97
• /
• 2002

Reading education in elementary school is being performed without connection between the curriculums and is searching for a diversified method of reading education. There are other problems in reading education such as absence of several reading education programs lack of experts with field experiences and difficulties in practicing a continuous reading education due to the emotional and disconnection between school and home. We designed a web-based reading education support system as a supplement for the reading education in which an electronic library and information about each reading-related activity can be shared. This reading education support system based on internet can connect reading education to the students everyday life. The electronic library can activate reading education by providing book management, a bulletin about the impression of a book and the information on recommended books. In addition, this electronic library can develop various reading education programs and can strengthen the relationship between school and home. This system also can make knowledge and information related activities after reading books be commonly available to all schools through the realization module, according to school and class. Therefore, various material related to reading education can be shared and statistical works are possible with the system we developed in this study.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.150-156
• /
• 2009

Objectives : The conventional removable appliance, composed of wires and acrylic resin, had unaesthetic results and poor retention. The flexible denture, as an alternative, presents improved aesthetics with the thin and strong resin retentive area. In addition, it also enhances patients' sensory function as a result of decreased volume of denture base. The flexibility of the flexible denture reduces the possibility of fracture and distributes the masticatory forces transmitted to the abutments and residual bone tissue. This report describes a 10-year-old girl and a 6-year-old boy with oligodontia treated with the flexible dentures as an alternative to conventional removable appliances. Methods : Impression was taken using alginate material and sent to a laboratory with the bite for fabrication of the flexible denture. Prior to try-in, the flexible denture was immersed in water at $90^{\circ}C$ for one minute and cooled. Impinging area of the denture was checked by $Fit-Checker^{(R)}$ and removed and the denture was delivered to the patient. Results : Both patients were satisfied with the flexible dentures, which presented improved retention and aesthetics. Conclusion : For patients with oligodontia, flexible dentures can be considered as a treatment of choice, which may replace the conventional denture.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.2
• /
• pp.97-105
• /
• 2017

Purpose: The purpose of this study was comparing the efficacy of passive irrigation (PI) and passive ultrasonic irrigation (PUI) for ability to remove debriment of canals. Materials and Methods: Mandibular premolars were decoronated and standardized to 16 mm length. After root canal enlargement and half separating longitudinally, standardized groove of 4 mm length, 0.2 mm width and 0.5 mm depth were formed on the dentin wall of one half. Three depressions in the canal wall of the opposite half, 0.3 mm in diameter and 0.5 mm in depth, were formed. After each groove and depression was filled with dentin debris, two sections of each half were reassembled using impression putty material. In group 1 the canals were irrigated with 2.5% NaOCl by PI. In group 2 the canals were irrigated with 2.5% NaOCl by PUI. Before and after root canal irrigation, the root canal wall of the section was taken with a microscope and a digital camera as images. The amount of dentin debris remaining in grooves and depressions was assessed using a scoring system. Results: There was no significant difference between PI and PUI except for the middle 1/3 of the root canal (P = 0.004). Conclusion: At the middle 1/3 of the root canal, PUI removed more dentine debris than PI. But the removal efficiency of dentin debris is not significantly different between the PUI and PI at the apical area of root canal in mandibular premolars.

• Restorative Dentistry and Endodontics
• /
• v.35 no.4
• /
• pp.257-266
• /
• 2010

The purpose of this study was to determine the effect of post types and sizes on fracture resistance in immature tooth model with various restorative techniques. Bovine incisors were sectioned 8 mm above and 12 mm below the cementoenamel junction to simulate immature tooth model. To compare various post-and-core restorations, canals were restored with gutta-percha and resin core, or reinforced dentin wall with dual-cured resin composite, followed by placement of D.T. LIGHT-POST, ParaPost XT, and various sizes of EverStick Post individually. All of specimens were stored in the distilled water for 72 hours and underwent 6,000 thermal cycles. After simulation of periodontal ligament structure with polyether impression material, compressive load was applied at 45 degrees to the long axis of the specimen until fracture was occurred. Experimental groups reinforced with post and composite resin were shown significantly higher fracture strength than gutta-percha group without post placement (p < 0.05). Most specimens fractured limited to cervical third of roots. Post types did not influence on fracture resistance and fracture level significantly when cement space was filled with dual-cured resin composite. In addition, no statistically significant differences were seen between customized and standardized glass fiber posts, which cement spaces were filled with resin cement or composite resin individually. Therefore, root reinforcement procedures as above in immature teeth improved fracture resistance regardless of post types and sizes.

• Journal of Fashion Business
• /
• v.6 no.2
• /
• pp.41-52
• /
• 2002

At the beginning of the modern times, orientalism and ethnic character was the main stream of current fashion. Early in the twentieth century, orientalism had a tremendous affect on various areas of society, culture, and art. Particularly, it inspired and activated the design of costume. A great variety of colors and construction of the Orient and geometrical simplicity were based on the creation of modern costume. Ethnic placed weight on the Orient because Japan strengthened competitiveness and China opened the door to foreign countries. Therefore, a large number of the oriental costume produced by a variety of fashion designers. The oriental handicraft, motif and colors of the traditional costume have been used in modern costume. In addition, they are precious ideas for designers. This thesis is about a Study on costume embroidery close to fashion through the oriental embroidery and the concept of oriental embroidery. It is also a study on patterns, skills and colors of the oriental embroidery shown in modern fashion and practical use through the designers works. First, concept, process of change, patterns, skills and colors of the oriental embroidery are mainly discussed. 1.The oriental embroidery consists of life, Buddhism, appreciation and costume embroidery. Embroidery was widely used for a variety of purposes. First, it is to make a good impression and beauty. Second, to decorate many kinds of patterns and shapes. Last, to indicate social status and stages. 2.The origin of the oriental embroidery started in Persia. was It greatly developed in Iran and was introduced in Korea via China. We are reminded of the oriental embroidery of China. China is the original place of oriental embroidery. Oriental embroidery has developed the peculiar embroidery according to each climate, custom and nationality. On the basis of these, the practical use of the oriental embroidery on modern fashion is presented through patterns, skills and colors which leads Korean designers use. Even though the oriental embroidery is not very popular among people owing to a great deal of cost and a demand for labor, the patterns and colors of the embroidery has been already familiar with the contemporaries A more profound study on the oriental embroidery will supply a great deal of material and ideas to the fashion industry. Moreover, an effort to raise self-pride in traditional culture will be also in need.

• Archives of Plastic Surgery
• /
• v.35 no.1
• /
• pp.48-55
• /
• 2008

Purpose: We measured linear distances, angles and inclinations on the cast models of the noses, and compared these indirect measurements with the direct measurements obtained from the nose in order to validate the accuracy of the indirect anthropometry using the cast model. Methods: Subjects were 50 males and 50 females, medical students in twenties(mean 27.1 years). Cast models were made from the alginate impression material and the plaster. In direct anthropometry, 16 linear, 7 angular, and 2 inclination measurements between 11 landmarks on the nose were obtained using sliding caliper, spreading caliper, and fabric tape measure. At the same time, the same measurements were obtained from the cast models of the same people. Total 25 measurements were compared, and tested by the independent t-test of SPSS. Results: The standard values of Korean nose in twenties were obtained. 24 measurements except the columellar labial angle were not statistically different between the indirect anthropometry and the direct anthropometry. Conclusion: Indirect anthropometry on the cast model of the nose revealed no significant difference from the anthropometric measurement statistically, accounting for 24 in 25 measurements(96%). There are two possible reasons that caused the difference of columellar labial angle between direct and indirect anthropometry. First, the columellar labial angle could be decreased by protrusion of the lips which resulted from contracting mouth in which an drinking straw had been applied on the mouth corner for patients' respiration during making cast model. Second, it is generally known that the columellar labial angle could be measured larger when soft tissues were pressed by protractor in direct anthropometry. Using a drinking straw with greater diameter, and scheming respiration through the nostrils that patients don't feel discomfort, the more accurate data would be obtained from the indirect anthropometry using the cast models of the noses.

• Archives of Plastic Surgery
• /
• v.34 no.1
• /
• pp.18-23
• /
• 2007

Purpose: Anthropometry can be divided into two methods, direct anthropometry and indirect anthropometry. The most ideal and accurate method is a direct anthropometry. However, it is difficult to measure in the case of children because of poor cooperation, and it lacks re-productivity. Cast model has advantages of three dimensional featuring, inexpensive and easy fabrication. This study is conducted to find out an accuracy of indirect anthropometry on cast model by comparing it with direct anthropometry. Methods: Total 48 cleft lip nasal deformity patients (unilateral, 40; bilateral, 8) were included in this study. Cast models were made before surgery under general anesthesia with alginate impression material and model plaster. Eleven linear measurements among 7 landmarks were taken as direct anthropometry before surgery with Castroviejo spreading caliper. At the same time, indirect anthropometry on cast model was done at the same linear distances as well. Results: Of the total 11 linear measurements, both ala lengths, both columella lengths, nose width, projective distance between facial insertion points of the ala, projective distance between the alar base points, right nostril floor width, and columella width were statistically correlated between indirect anthropometry on cast model and direct anthropometry. However, the nasal tip protrusion and the left nostril floor width were not statistically correlated. Conclusion: Accuracy of indirect anthropometry on cast model can be influenced by cast model fabrication techniques and correct identification of landmarks. Nasal tip protrusion could be reduced by compression of the nasal tip in the process of cast model fabrication and nostril floor width can be varied by muscle relaxation of anesthetics and incorrect identification of subalare in cleft lip nasal deformity. If sufficient care is taken to make cast model and to define landmarks exactly, indirect anthropometry on cast model can be a reliable method as direct anthropometry.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.12
• /
• pp.1761-1771
• /
• 2007

The artificial exaggeration of stage costumes is thought to be one of the major techniques of enhancing dramatic expression on stage, whichever for visual impact or symbolic effect of dramatization. In the history of stage dressing, a variety of styles has been tried using different materials and production techniques. This may be reviewed as an effort to express dramatic effects more effectively. As this trend became obvious in Europe after the Second World War, this study analyzes the stage costume to deepen our understandings of the role of costumes in expressing dramatic effects. To accomplish this, we first summarized the history of stage costume materials and technical advance and chose five major cases representing the history of stage costume since the Second World War in Europe based on aesthetic and creative aspects: 1) Simplified stage of Jacques Copeau, 2) Stylized stage of Bertolt Brecht, 3) Essential stage of Grotowski, 4) Measured stage of Robert Wilson the Master, and 5) Post-dramatic stage of Philippe $Decoufl\'{e}$. In each of particular case, the historical, material and dramatic contexts were examined as well as different material-effects. The results are as followings: 1) Costume for Copeau's simplified stage: its simplicity plays a supporting role to the gesture of actors(intensifying effect). 2) Costume for Brecht's stylized stage: the artificial stylization integrates into the play with the importance approximately equal to the actors's acting. 3) Costumes for Grotowski's essential stage: costumes disappeared to emphasize only actor's presence on stage. 4) Costumes for Robert Wilson's measured stage: costumes made concrete impression to the extent of obtaining the same importance of actor's body among other stage art elements(lighting, sound, props, actor, text, etc). 5) Costumes for Decoufle's post-dramatic stage: costumes in the era of multi technology possess multi functional aspects that surrogate actors' body. This study suggests that stage costumes take an important part in dramaturgy to the extent that the intent of dramaturgy can be induced enough from stage costume. Thus, costume makers are expected to incorporate the appropriate dramatic factor more than before.