• 제목/요약/키워드: Impedance Measurement

검색결과 872건 처리시간 0.028초

Analytical Modeling of Conventional and Miniaturization Three-Section Branch-Line Couplers

  • You, Kok Yeow;AL-AREQI, Nadera;Chong, Jaw Chung;Lee, Kim Yee;Cheng, Ee Meng;Lee, Yeng Seng
    • Journal of Electrical Engineering and Technology
    • /
    • 제13권2호
    • /
    • pp.858-867
    • /
    • 2018
  • Analytical modeling equations are proposed for the conventional and modified three-section branch-line couplers. The analytical equations are explicit and capable of determining the characteristic impedance of each branch line for the coupler at desired coupling level as well as the suitability of broadband S-parameters analysis. In addition, a bandwidth extension and miniaturization of three-section branch-line coupler using slow-wave and meandering line structures were designed. The modified coupler, which is able to operate within frequencies from 1.5 to 3.32 GHz has been fabricated, tested and compared. A bandwidth extension of 600 MHz and 53% reduced size of the modified coupler have been achieved compared to a conventional coupler. The modified coupler has roughly insertion loss and coupling of -4 dB and -3.2 dB, while the isolation and return loss, respectively less than -14 dB with fractional bandwidth of 77 %, as well as phase imbalances less than $2^{\circ}$ over the operating bandwidth. Overall, the derived analytical model, simulation and measurement results demonstrated a good agreement.

2-2형 압전복합체 제작 및 등가 물성 도출 (Fabrication of a 2-2 Mode Piezocomposite and Derivation of its Equivalent Properties)

  • 신호섭;노용래
    • 한국음향학회지
    • /
    • 제30권8호
    • /
    • pp.436-445
    • /
    • 2011
  • 본 논문에서는 2-2형 압전복합체의 등가 물성 도출에 관해 연구하였다. 먼저 2-2 압전복합체의 특성 변화를 유한요소법으로 해석하였고, 해석 결과와 2-2 압전복합체 시제작품의 특성 측정 결과를 비교하여 유한요소해석의 타당성을 검증하였다. PZT-5H와 고분자재료로 구성된 압전복합체의 단일상 등가물성은 Asymptotic Averaging Method를 이용하여 도출하였고, 도출된 물성을 다양한 진동 모드의 단일상 공진자 유한요소 모델에 대입한 후 완전한 2-2 압전복합체와의 임피던스 스펙트럼 차이를 최소 자승법을 이용하여 보정함으로써, 도출된 등가 물성값의 정확성을 향상시켰다. 본 연구에서 도출한 2-2 압전복합체의 등가 물성은 향후 다양한 음향 센서의 설계에 유용하게 사용될 수 있을 것이다.

직접삽입 급전 방식을 이용한 고온초전도 마이크로스트립 안테나의 제작 및 특성 해석 (Fabrication and characteristic analysis of High-Tc superconducting microstrip antennas using direct inset feeding technique)

  • 정동철;한병성;김진;유기수;홍석용;이종하
    • 대한전자공학회논문지TE
    • /
    • 제37권1호
    • /
    • pp.70-78
    • /
    • 2000
  • 초전도체를 초고주파 소자에 응용하려고 할 경우, 초전도 전자기학의 불확실함이나 초전도 기판의 돈도 의존성은 산업 응용을 위한 안테나를 제작하는데 있어 어려움을 준다. 따라서 실제 응용을 위해서는 일반 안테나와 비교하여 정확하고 자세한 특성이 알려져야만 한다. 본 논문에서는 금 안테나와 초전도 안테나의 비교 연구를 수행하였으며 반사 손실, 특성임피던스, 효율 및 다른 다양한 특성들을 보고하였다. 본 연구에 사용된 고온초전도 박막은 $YBa_2Cu_3O_{7-x}$ (YBCO)/MgO 이며 초전도 안테나는 마이크로스트립 급전선을 방사 패치의 50 ${\Omega}$ 영역에 결합시키는 형태로 만들어졌다. 금 안테나와 초전도 안테나의 측정 결과는 이러한 구조를 이용하여 유용한 안테나가 제작될 수 있음을 보여주었다.

  • PDF

X-Band 레이더를 위한 3-포트 서큘레이터 (3-Port Circulator for X-Band Radar)

  • 윤성현
    • 한국통신학회논문지
    • /
    • 제40권2호
    • /
    • pp.355-362
    • /
    • 2015
  • 본 연구에서는 X-밴드 레이더에서 사용하는 9.385[GHz] 서큘레이터를 Y형 WR112 도파관속에 페라이트를 삽입하여 제작을 하였다. 페라이트 설계는 B/R(Below Resonance) 모드 방식을 사용하여, 페라이트 내부에서 전계 분포가 120도의 회전이 발생하는 조건과 페라이트의 내부의 직류 자계의 세기와 외부 자계의 세기를 계산하였다. 또한, 임피던스 정합을 포함하여 대역폭, 선택도, 삽입손실 등, 서큘레이터의 성능 향상을 위하여 두 개의 페라이트 사이에 같은 형태의 유전체를 삽입하였다. 최적의 페라이트 형태 및 유전체를 얻기 위하여 CST MWS를 이용하였다. 9.385[GHz]에서 시뮬레이션 결과는 정재파비 1.02, 분리도 -40dB, 삽입손실 0.2dB의 결과를 얻었고, 측정 결과는 정재파비 1.03, 분리도 -38dB, 삽입손실 1.2dB 이었다. 분리도, 정재파비는 시뮬레이션 결과와 잘 일치 하였지만, 삽입손실은 약 1dB 정도 크게 발생하였다.

지중 저압 전력선의 협대역 전력선통신 채널특성 및 적용성에 대한 연구 (Study on Channel Characteristics and Feasibility of Narrowband Power Line Communication over Underground Low Voltage Power Lines)

  • 유현우;윤경섭;강수경;최인지;박병석;김일한;김원수
    • 한국통신학회논문지
    • /
    • 제38A권10호
    • /
    • pp.874-884
    • /
    • 2013
  • 본 논문은 국내 지중 저압선에 대한 협대역 PLC 기술의 통신 채널 특성과 이를 기반으로 한 적용성 연구결과에 대해 기술한다. 지중 저압선이 매설된 실제 거주지역에 협대역 PLC 채널 측정을 위한 시스템을 구성하였으며, 이를 통해 채널 응답, 잡음 PSD, 선 임피던스를 포함하는 채널 특성을 측정하였다. 측정된 채널 특성을 분석하여 국내 지중 저압선의 채널 특성이 협대역 PLC 적용에 적합한 특성을 띠며, 250kHz 이후 주파수 대역이 특히 양호한 특성을 나타내는 것을 보였다. 이를 기반으로 IEEE P1901.2 규격을 채택, FCC High 대역을 이용하여 네트워크 테스트를 수행하였으며 이를 통해 국내 지중 저압선에 협대역 PLC 기술의 적용이 가능함을 확인하였다.

고효율의 리튬/공기 이차전지 공기전극용 Mn1+XCo2-XO4 고용체 촉매 합성 및 분석 (Synthesis and Characterizations of Mn1+XCo2-XO4 Solid Solution Catalysts for Highly Efficient Li/Air Secondary Battery)

  • 박인영;장재용;임동욱;김태우;심상은;박석훈;백성현
    • 전기화학회지
    • /
    • 제18권4호
    • /
    • pp.137-142
    • /
    • 2015
  • $Mn_{1+X}Co_{2-X}O_4$ solid solutions with various Mn/Co ratios were synthesized by a combustion method, and used as cathode catalysts for lithium/air secondary battery. Their electrochemical and physicochemical properties were investigated. The morphology was examined by transmission electron microscopy (TEM), and the crystallinity was confirmed by X-ray diffraction (XRD) analyses. For the measurement of electrochemical properties, charge and discharge measurements were carried out at a constant current density of $0.2mA/cm^2$, monitoring the voltage change. Electrochemical impedance spectroscopy (EIS) analyses were also employed to examine the change in charge transfer resistance during charge-discharge process. $Mn_{1+X}Co_{2-X}O_4$ solid solutions showed enhanced cycleability as a cathode of Li/air secondary battery, and the performance was found to be strongly dependent on Mn/Co ratio. Among synthesized catalysts, $Mn_{1.5}Co_{1.5}O_4$ exhibited the best performance and cycleability, due to high charge transfer rate.

가변 분배 비율 비대칭 전력 분배기 (An Unequal Power Divider with Adjustable Dividing Ratio)

  • 임종식;오성민;구재진;정용채;안달
    • 한국전자파학회논문지
    • /
    • 제18권5호
    • /
    • pp.478-485
    • /
    • 2007
  • 본 논문에서는 분배 비율을 조절할 수 있는 1:N 비대칭 월킨슨 전력 분배기를 제안한다. 제안된 비대칭 전력분배기는 월킨슨 구조에 기인하고 있다. 제안한 분배기는 사각형 형태의 결함 접지 구조와 결함 접지 구조 안에 위치한 격리 패턴 구조, 그리고 바이어스 전압에 따라 캐패시턴스가 변하는 버랙터 다이오드를 지니고 있다. 결함 접지 구조를 지니는 마이크로스트립 전송 선로의 특성 임피던스는 버랙터 다이오드에 인가된 전압에 따라서 값이 변화하고, 이로 인하여 비대칭 전력 분배 비율도 변한다. 측정에서 얻은 비대칭 전력 분배 비율(N)은 $2.59{\sim}10.4$로써 매우 다양한 전력 분배 비율을 보여준다.

65-nm CMOS 공정을 이용한 24 GHz 전력증폭기 설계 (Design of a 24 GHz Power Amplifier Using 65-nm CMOS Technology)

  • 서동인;김준성;;김병성
    • 한국전자파학회논문지
    • /
    • 제27권10호
    • /
    • pp.941-944
    • /
    • 2016
  • 본 논문에서는 차량 충돌 방지 및 생활 감시용 근거리 레이다(Short Range Radar: SRR)를 위한 24 GHz 전력증폭기를 삼성 65-nm CMOS 공정을 이용하여 설계하였다. 제안한 회로는 2단 차동 전력증폭기로 공통소스 구조를 사용하고, 트랜스포머 구조를 사용하여 단일 대 차동변환, 임피던스 정합, 전력결합을 하였다. 측정결과, 24 GHz에서 15.5 dB의 최대 이득과 3.6 GHz의 3 dB 대역폭을 얻었다. 측정된 최대 출력 전력은 13.1 dBm, 입력 $P1_{dB}$는 -4.72 dBm, 출력 $P1_{dB}$는 9.78 dBm이며, 측정된 최대 전력 효율은 17.7 %이다. 본 전력증폭기는 1.2 V의 공급전원으로부터 74 mW의 DC 전력을 소모한다.

광대역 특성을 갖는 이중 원형 링 모노폴 안테나의 설계와 제작 (Design and Fabrication of Dual-Ring Monopole Antenna for Wideband Characteristics)

  • 윤중한;이영철
    • 한국전자통신학회논문지
    • /
    • 제8권9호
    • /
    • pp.1285-1291
    • /
    • 2013
  • 본 논문에서는 광대역 특성을 갖는 이중 원형 링 모노폴 안테나를 설계 및 제작 하였다. 제안된 안테나는 평면형 모노폴 형태를 기본으로 이중 원형 링과 접지면으로 구성되어 있으며 광대역 특성을 갖도록 설계하였다. 최적화된 파라메타을 얻기 위해 상용 툴(HFSS)을 사용하여 시뮬레이션 하였으며 안테나 성능에 민감하게 적용받는 파라메타를 찾아내서 최적화된 수치를 얻었다. 얻어진 최적화된 수치를 사용하여 제안된 안테나를 제작하였다. 제작된 안테나는 광대역 특성을 갖는 대역에서 반사손실, 이득, 방사패턴의 특성을 측정하였다. 측정결과, -10dB을 기준으로 4,530 MHz(2,510-7,040 MHz)의 광대역 특성을 얻었으며 주어진 이득은 최대이득 0.71~3.38 dBi 그리고 평균이득 -3.85~0.3 dBi을 얻었다. 측정된 방사패턴의 경우, 전체적으로 E면은 전방향성의 방사패턴을 갖고 있으면 H면은 다이폴 안테나의 전형적인 특성을 나타내고 있다

A Study on Obesity-promoting Factors for the Elementary School Chirdren

  • Cheong, Min-Shon;Kim, Ok-Hyun;Cha, Ki-Chul;Kim, Jung-Hee
    • 대한지역사회영양학회지
    • /
    • 제2권5호
    • /
    • pp.680-686
    • /
    • 1997
  • The purpose of this study is to examine the relationships among body composition, dietary intake, exercise, and life style in children(M=80, f=102) of the 5th and 6th grades of elementary school. Anthropometry and multifrequency bioelectrical impedance analysis were conducted to estimate body composition. Dietary intake, exercise, and life style were determined by using questionnaires. When obesity was classified greater than 120% of the ideal body weight, the prevalence rates of obesity were 31.2% for boy and 20.6% for girl. There were significant differences in body composition between nonobese(NO) and obese(OB) groups. Mean fat mass(FM) and lean body mass(LBM) were 8.6kg and 27.7kg for NO group and 16.7kg and 32.3kg for OB group, respectively. Also a significant difference was found in hydration rate(TBW/body weight)between groups( <0.01). No significant difference was found I total calorie intake and nutrient intakes between groups. No difference was found in the frequency and duration of outdoor exercise and indoor activities. Mean sleeping hours was 8-9hours for 62% of nonobese children and for 59% of obese children. However, calorie intake per body weight was significantly lower inobese children than in nonobese. The present study showed that significant differences existed in their body size and composition between NO and OB groups , while no differences existed in daily calorie intake, excercise , and life style. This may indicate that important obesity-promoting factors of early onset obesity may rely on other factors such as hereditary or environmental factors besides factors considered. Further studies are required to understand obesity-promoting factors in children. (Korean J Community Nutrition 2(5) : 680∼686, 1997)

  • PDF