• Corrosion Science and Technology
• /
• v.7 no.6
• /
• pp.362-369
• /
• 2008

The impact abrasion behavior of high manganese steel is investigated under three kinds of impact energy in acid hematite ore slurry by using a modified MLD-10 impact abrasion tester. Through the SEM observation of the worn surface and the optical metallographic analysis of the cross-sectional samples, the corrosive impact abrasion mechanisms of the steel under different impact energies are studied. In acid-hematite slurry, the variations of impact energies would result in synchronous transformation of the impact abrasion properties and mechanisms of the high manganese steel in the corrosive condition, as led different corrosive impact abrasion mechanism under different impact energies.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.3
• /
• pp.688-696
• /
• 1995

Cemented carbides, best known for their superior mechanical properties such as high strength, high hardness and high wear resistance, have a wide range of industrial applications including metal working tools, mining tools, and wear resistance components. The cobalt has been used as a binder in the WC-based hard composites due to its outstanding wetting and adhesion characteristics even though its expensiveness. Therefore many studies attempted to find a better substitute for cobalt as binder to decrease production costs. This investigation is a pre-step to study dynamic fracture characteristic evaluation of a WC-Co hardmetal were evaluated by using the instrumented Charpy impact testing procedures. It was found that the dynamic characteristics of used strain amplifier were very important experimental factors to extract valid dynamic fracturing data in WC-Co specimens. It was suggested by showing some experimental examples that when we wished to evaluate dynamic fracture toughness for cemented carbide composites by using the instrumented Charpy impact testing procedure, a careful attention must be given to obtain valid results.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.3
• /
• pp.225-240
• /
• 2015

This study aims to identify the factorial constructs of the relational benefits perceived by consumers of outdoor wear brands and their impacts on the consumers' trust in and satisfaction with outdoor wear brands. An online survey was conducted with females and males between the ages of 20 and 50 who have experienced buying outdoor wear brands. A total of 420 responses were analyzed by factor analysis, a reliability test, and multiple regression analysis. The results of this study were as follows: first, the results of factor analysis and the reliability test on the relational benefits perceived by outdoor wear brand purchasers clearly showed conceptual constructs that included informational benefits, social benefits, and psychological benefits. The sub-dimension of perceived relational benefits had significant effects on brand trust and satisfaction. Specifically, respondents revealed that they had higher brand trust if they felt psychologically comfortable, were offered useful information by outdoor wear brands, and had a favorable relationship with salespeople when they bought outdoor wear merchandise. Secondly, influences of perceived relational benefits on brand trust and satisfaction were not shown to differ depending on the congruity between outdoor wear brands and the purchaser's self-image. On the other hand, factors of perceived relational benefits revealed to differently have effects on brand trust and satisfaction depending on respondents' gender and age. Practical implications to understand outdoor wear target customers' relational benefits, self-image congruity and demographic characteristics and to enhance trust and satisfaction with outdoor wear brands are proposed.

• The Research Journal of the Costume Culture
• /
• v.22 no.4
• /
• pp.632-639
• /
• 2014

The purpose of this study was to verify the effect of drive swing on multiple functional wear wearing in golf. The subjects were 6 men ($22.67{\pm}0.82$ yrs, $175.42{\pm}3.42cm$, $78.75{\pm}4.78kg$), who had career each with at least 8 yers golf experience with right-hander. For kinemetical analysis, this study used equipments with 7 motion capture cameras (300Hz) and analysis program (Nexus1.5). The total time of the club head, displacement magnitude of the COM and swing plane were compared of according to functional wear wearing and non-weraing during golf drive swing. The results of the study are as follows. The total time of the club on wearing ($2.18{\pm}0.06sec$) was faster than non-wearing ($2.52{\pm}0.15sec$). Displacement magnitude of the COM on wearing ($4.06{\pm}0.67cm$) was shorter than non-wearing ($5.79{\pm}0.72cm$). Also, swing plane was found to be significantly different of 3 phase excepted BST-DS (back swing top-down swing) phase. AD-BST (address-back swing top) phase on wearing ($13.86{\pm}3.08cm$) decrease more than non-wearing ($20.82{\pm}3.99cm$), DS-IP (down swing-impact) phase on wearing ($6.25{\pm}1.35cm$) decrease more than non-wearing ($7.18{\pm}1.52cm$) and IP-FT (impact-follow though) phase on wearing ($7.93{\pm}2.09cm$) decrease more than non-wearing($9.68{\pm}2.02cm$). The multiple functional wear wearing was contribution to come close for one-plane, a long with consistency and accuracy on golf drive swing.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.6
• /
• pp.637-644
• /
• 2012

In a nuclear power plant, fretting wear due to impact motion between U-tubes and support structures located in steam generators can cause serious problems. In order to guarantee the reliability of the steam generator, the damage due to fretting wear should be thoroughly investigated. The purpose of this study is to elucidate the fretting wear mechanism qualitatively and quantitatively. Hence, fretting wear simulation is performed for the environments to which the actual steam generators in nuclear power plants are exposed. Initial experimental results are obtained for various experimental parameters, and the effect of the work rate and temperature on fretting wear is evaluated. In water, the wear coefficients for $90^{\circ}C$, $200^{\circ}C$, and $340^{\circ}C$ are found to be $9.051{\times}10^{-16}\;Pa^{-1}$, $3.009{\times}10^{-15}\;Pa^{-1}$, and $2.235{\times}10^{-15}\;Pa^{-1}$, respectively. It is also found that the wear coefficient at room temperature is larger than that at low temperature in water because of the dynamic viscosity of water.

• Journal of the Korea Institute of Building Construction
• /
• v.5 no.1 s.15
• /
• pp.53-61
• /
• 2005

The purpose of this study presents useful data on the choice or development of floor covering from slip viewpoint by examining closely the impact of the changes in sliding experiments due to the wear of floor covering by walk. The result of wear practical test per ten thousand walks enforces some kind of popular floor covering and measure of coefficient of slip resistance as follows: (1) When surface of floor covering is in the state of wet, the degree of wear doesn't affect greatly in slip. (2) When surface of floor covering is in dry and clean state, most floor coverings have the tendency to lower the coefficient of slip resistance with the amount of walk on it. (3) Change in the tendency of slip resistance by wear appeared mainly due to the differences in the state of floor covering and organic floor covering appeared to have great reduction of coefficient of slip resistance than the inorganic ones. (4) According to the result of investigation on changes in tendency of coefficient of slip resistance due to the increase in the number of walk and if two hundred thousand walks were done, regardless of surface shape or kind of site, etc, the safety of floor covering, in slip viewpoint, greatly reduces.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.05a
• /
• pp.63-70
• /
• 2002

Wear on the tube-to-spring contact is investigated experimentally. The wear is caused by the vibration of the tube while the springs support it. As for the supporting conditions, applied are the contacting normal force (P) of 5 N, just-contact (P = 0 N) and the gap of 0.1 mm. The gap condition is tried far considering the influence of simultaneous impacting and sliding on wear. Results show that the wear volume increases in the order of the gap, the just-contact and the 5 N conditions. This is explained from the contact geometry of the spring, which is convex of smooth contour. The contact shear force is regarded smaller in the case of the gap existence compared with the other conditions. Wear mechanism is considered from SEM observation of the worn surface. The variation of the normal contact traction is analysed using the finite element analysis to estimate the slip displacement range on the contact with consulting the fretting map previously obtained.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.442-449
• /
• 2000

Before the complete construction of new high-speed line between Seoul and Pusan, KTX is going to operate on both new high-speed line between Seoul and Daegu and electrified conventional lines between Daegu and Pusan. Then, the wheels of KTX are going to operate on various rails such as KS50N and KS60 of conventional line as well as UIC60 of high-speed line. Also, conventional line will have a mixed traffic mode with various types of trains operating on it, such as Saemaul and Mugunghwa. Hence, this study reviews the wear phenomena of wheels and rails in geometrical point of view by comparing their profiles. The analyses of the results show that because UIC60 rail is designed for KTX, KS50N rail whose profile is similar to that of UIC60 will not have any impact on the shape of wheel wear. On the other hand, KS60 rail is expected to have partial wear on both the flange of KTX wheel and the gauge corner of the rail in the initial stages. However, the operation of the trains whose wheels have 1/20 conicity will cause partial sidewear on the inside of the rail and the movement of the contact point between KTX wheel and the rail toward the inside of the track. As a result, the flange wear of KTX wheel will be reduced and the formation of wear-equilibrium profile will be faster.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.7
• /
• pp.937-945
• /
• 2002

The purpose of this study was to investigate the effects of internet shopping interest, fashion interest, sex on internet clothing purchase intention and selection criteria. The subjects used for the study were 76 male and l25 female college students. The clothing purchase intention was measured by five categories: formal wear, casual wear, sports wear, under wear, and fashion accessories. The clothing selection criteria consisted of four factors: aesthetics, conformity, individuality, and comfort. The results showed that there was a main effect of internet shopping interest on internet purchase intention fur all clothing categories. Also, there were differences between men and women concerning the purchase intention of casual wear and sports wear. In regard to clothing selection criteria, the results showed that fashion interest and sur had an impact on three factors of clothing selection criteria. The subjects considered aesthetics, conformity, and individuality important when they had higher fashion interest or were female. In addition to main effects, the interaction effects among internet shopping interest fashion interest, and sex were discussed.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.4
• /
• pp.179-190
• /
• 2012

During recent few years, Bike is arising as one of the most important item of sports market. As well as in domestic markets, customers are demanding specific brands only for young aged riders. Therefore, this study researched current bike wears and suggest digital textile printing with sports wear trends which also have safety and visual impact effectiveness, so it can be satisfied as green products and we also try to suggest sports sensitivity of existing cycle wear to city fashion. The purpose of this study is to figure out 20's-30's female biker attitude for bike wear and their purchasing habits and also their preference, digital textile design of city biker wear based on present condition research of riding wear markets and to establish high quality products with occupying high percentage of global markets and making high profits. For this study, bike wear distributors Survey First, foreign companies generally meet evenly sampling the 20s and 30s targeted vendors 10 companies were selected. 'city sporty ware' or 'casual line' dual 'extreme line' from all manufacturers, including, however did not distinguish it from all the vendors. This higher proportion of the recent upsurge in public and non-professional riders, despite the fact that you can see that the lack of 'Extreme line' compared to the 'casual' line of the city sporty ware production. overall seasonal sales in the spring appeared windbreak jacket, leggings and sweat emissions and at the same time built into the fabric dry faster T-shirt and shorts in the summer sales were higher. autumn jacket and produced excellent warm in winter fleece fabric T-shirts, pants, windshield jacket higher sales. showed improvements in design, improved in the order of the highest and perfect for everyday wear for both. As mentioned, we figure out 20's-30's female rider's attitude for riding suit and their purchasing habits and also their preference, so we can develop riding suit design based on their needs and suggest new design patterns.