• 산업기술연구
• /
• 제25권B호
• /
• pp.115-120
• /
• 2005

Impact seismic wave method is a method for non-destructive testing of concrete structure using of stress wave which is propagate and reflected from internal flaws within concrete structure and external surface. In this study, we performed frequency domain method using impact seismic wave test for safety diagnosis of civil engineering structure. And reflection method which is used for one-dimensional target such as tunnel lining and transmission method are compared with each other.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.49-56
• /
• 2001

The techniques to make assessment of the structural integrity of underground structures include Infrared thermagraphy, GPR using the reflection of the electromagnetic wave, ultrasonic test, seismic methods using the propagation of elastic wave, and etc These methods have pros and cons in the assessment of the structural integrity in the complex environment of the underground structure, so that a single method alone is not enough to evaluate parameters required for the assessment. In this study, a new seismic method was proposed to improve the existing methods and to provide an additional information like stiffness of concrete. The proposed method combines the advantages of the modified impact-echo test and the SASW method. To verify the validity of the proposed method, a large scale model of a tunnel concrete liner was built and the proposed method was applied to the center of the model and also to the corner of the model which has several distinct reflection boundaries.

• Smart Structures and Systems
• /
• 제8권2호
• /
• pp.219-237
• /
• 2011

This paper presents novel research into the source localization of multiple impacts. Source localization technology for single impact loads in a plate structure has been used for health monitoring. Most of research on source localization has been focused only on the localization of single impacts. Overlapping of dispersive waves induced by multiple impacts and reflection of those waves from the edge of the plate make it difficult to localize the sources of multiple impacts using traditional source localization technology. The method solving the overlapping problem and the reflection problem is presented in the paper. The suggested method is based on pre-signal processing technology using band pass filter and optimal filter. Results from numerical simulation and from experimentation are presented, and these verify the capability of the proposed method.

• 한국간호교육학회지
• /
• 제9권2호
• /
• pp.310-319
• /
• 2003

The purpose of this study was to determine what effect reflection on clinical practice experience had students as learners and care providers. Qualitative research method was used to study a group of four-year undergraduate nursing course. Content analysis was done using the classification method of Carper's four patterns of knowing. Results of the study indicated that the use of the reflective process of clinical debriefing and journaling was impact on the aspect of nursing science, moral component of knowledge in nursing, personal knowing in nursing and the art of nursing. Especially, students moved from a passive to a more active mode of learning. The most significant finding was that over time, reflective processes resulted in the emergence of the client as the central focus of care. It was suggested that reflection was an important learning tool in professional education and that the skills required for reflection need to be developed in professional courses.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.131-135
• /
• 1989

Hot electron simulation of silicon using Monte Carlo method was carried out to investigate impact ionization characteristics near the drain of MOSFET's at 77 and 300K. We successfully characterized drift velocity and impact ionization at 77 and 300K employing a simplified energy band structure and phonon scattering mechanisms. Woods' soft energy threshold model was introduced to the Monte Carlo simulation of impact ionization, and good agreement with reported experimental results was resulted by employing threshold energy of 1.7 eV. It is suggested that the choice of the critical angle between specular reflection and diffusive scattering of surface roughness scattering may be important in determining the impact ionization charateristics of Monte Carlo simulation near the drain of MOSFET's.

• 한국터널지하공간학회 논문집
• /
• 제11권1호
• /
• pp.47-56
• /
• 2009

록볼트는 숏크리트와 함께 지하구조물의 주지보재로써 중요한 역할을 수행한다. 따라서 록볼트에 발생된 공동결함은 지하구조물의 안정성에 영향을 줄 수 있다. 최근 록볼트 건전도 평가를 위한 비파괴 검사 방법들 중 피에조 디스크 엘리먼트와 음향방출센서를 사용하는 유도초음파의 투과법과 반사법이 우수한 결과를 보여 주었다. 하지만 피에조 디스크 엘리먼트에서 발생되는 파는 현장에 적용하기에 부족한 에너지의 크기를 가진다. 또한 투과법의 경우 현장에서 록볼트 시공시 피에조 디스크 엘리먼트를 철근 끝단에 설치하여 시공하여야 한다. 본 연구의 목적은 충분한 에너지를 발생시킬 수 있는 유도초음파의 반사법을 개발하고 이를 현장에 시공된 록볼트의 건전도를 경가에 적용하는 것이다. 본 연구는 실내실험과 현장실험으로 수행되었다. 충분한 에너지를 갖는 유도초음파를 록볼트 두부에 자국정을 대고 해머로 타격하여 발생시켰으며, 이를 음향방출센서로 수신하였다. 측정된 신호의 분석을 위해 웨이브렛 변환을 이용하였다. 웨이브렛 변환의 최고점으로부터 에너지 속도를 산정하여 록볼트의 건전도를 평가하였다. 유도초음파의 에너지 속도는 실내에 설치된 록볼트 실험체와 현장에 시공된 록볼트의 결함비율이 증가함에 따라 증가하는 것으로 나타났다. 본 연구의 결과는 해머 타격방법이 현장에서 록볼트 건전도 평가에 유용한 방법이 될 수 있음을 보여 준다.

• Structural Engineering and Mechanics
• /
• 제62권6호
• /
• pp.781-788
• /
• 2017

In this paper, a stress wave model is established to describe the three states (separate, contact and impact) of clearance joints. Based on this stress wave model, the propagation characteristics of stress wave generated in clearance joints is revealed. First, the stress wave model of clearance joints is established based on the viscoelastic theory. Then, the reflection and transmission characteristics of stress wave with different boundaries are studied, and the propagation of stress wave in viscoelastic rods is described by the characteristics method. Finally, the stress wave propagation in clearance joints with three states is analyzed to validate the proposed model and method. The results show the clearance sizes, initial axial speeds and material parameters have important influences on the stress wave propagation, and the new stress waves will generate when the clearance joint in contact and impact states, and there exist some high stress region near contact area of clearance joints when the incident waves are superposed with reflection waves, which may speed up the damage of joints.

• Geomechanics and Engineering
• /
• 제18권6호
• /
• pp.605-614
• /
• 2019

The present paper seeks to investigate propagation and reflection of waves at free surfaces of homogeneous, anisotropic and rotating micropolar fibre-reinforced medium with voids. It has been observed that, in particular when P-wave is incident on the free surface, there exist four coupled reflected plane waves traveling in the medium; quasi-longitudinal displacement (qLD) wave, quasi-transverse displacement (qTD) wave, quasi-transverse microrotational wave and a wave due to voids. Normal mode Analysis usually called harmonic solution method is adopted in concomitant with Snell's laws and appropriate boundary conditions in determination of solution to the micropolar fibre reinforced modelled problem. Amplitude ratios which correspond to reflected waves in vertical and horizontal components are presented analytically. Also, the Reflection Coefficients are presented using numerical simulated results in graphical form for a particular chosen material by the help of Mathematica software. We observed that the micropolar fibre-reinforced, voids and rotational parameters have various degrees of effects to the modulation, propagation and reflection of waves in the medium. The study would have impact to micropolar fibre-reinforecd rotational-acoustic machination fields and future works about behavior of seismic waves.

• 한국환경과학회지
• /
• 제3권2호
• /
• pp.77-88
• /
• 1994

When we conduct environmental impact assessment, main contents consist of summary, project outline, environmental conditions, environmental impacts due to the project, mitigation devices, and alternative measures of harmful impact on environment. In this Paper, to understand how they really conduct air quality impact assessment and prediction and examine their effectiveness, we considered the provisions and actual case of environmental impact assessment in Korea with that in Japan. As a result, we propose a method of improving air quality impact assessment and Prediction, such as reflection of the result in environmental impact assessment, detailed assessment focused on relatively important environmental impact elements, field measurement investigation over four season and seven sucessive days, the uniformity of units, the proper model development to predict environmental concentration and a biennial environmental impact assessment for ex post management.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.394-402
• /
• 2009

To investigate the heavy-weight impact noise of apartment houses, numerical analysis was performed. The analysis acoustic pressure consider acoustic mode by finite element method. The variables considered effecting on the acoustic pressure are the Acoustic mode, acoustic damping, and the impulse load. The heavy-weight impact noise is a changeable value in the room. Since the most part of the frequency component of heavy-weight impact noise has low frequency. The noise in low frequency is related to the vibration of structure, the reflection of acoustic wave caused by wall and the standing wave called by acoustic mode. The prediction by the numerical analysis was verified with test result of the heavy weight-impact noise at apartment houses.