• IE interfaces
• /
• v.24 no.3
• /
• pp.196-209
• /
• 2011

In This Study, New Product Development Activities, Innovation Activities, Technical Cooperation Activities may have an Impact on Competitive Advantage, Development Performance and Business Performance. The aim of Empirical Analyze is to identify the Structural Causal Relationship among the Activities and Performance Factors. We get the Results as Follows : New Product Development Activities have a Positive Impact on Competitive Advantage as well as the Development Performance. Technological Innovation Activities have a Positive Impact on Competitive Advantage, and do not have enough Impact on the Development Performance. Technical Cooperation Activities have a Positive Impact on the Development Performance, and do not have enough Impact on the Competitive Advantage, Competitive Advantage has a Positive Impact on the Development Performance as well as the Business Performance. Development Performance has a Positive Impact on the Business Performance.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.52-59
• /
• 2013

The use of economic incentives to improve H&S performance in the construction industry in general, has been investigated by various scholars. However, few studies have looked at the impact of economic incentives on construction clients especially in the developing world. Therefore it was necessary to investigate specifically the impact of the economic incentive on client's H&S performance. Economic incentives are considered to be a proactive way of improving H&S performance. The investigation was conducted using a Delphi technique to determine the impact significance of the economic incentive or disincentive on construction clients' H&S performance. Findings from the study were that the economic factor had critical impact significance on clients' H&S performance. Further clients were 'very likely to' implement various H&S elements as a result of the economic incentive and disincentive. The paper will report on the findings from an analysis of impact significance of the economic incentives on clients. It will underscore the point that economic incentives or disincentives on construction clients are necessary to encourage them to actively participate in H&S performance improvement.

• Asia-Pacific Journal of Business
• /
• v.3 no.1
• /
• pp.29-38
• /
• 2012

This study aims at evaluating the impact of network formation variables and found to have positive impact on the economic performance and growth of the enterprises. The calucation of the weighted scores of networking statements brought some affirmative results to influence the performance of the enterprises. Through multiple regression and logistic regression models it is identified that network formation variables like service receiving status, consultation of the family, other business dummy and attendance in fair have some significant positive impact both on the growth and performance of the enterprises. In addition to above variables, from the set of enterprise characteristics natural logarithm of the market value of total assets and from the entrepreneurs' characteristics set of variables, schooling year and squared value of the experience have been found to have significant positive impact. Finally, it is concluded in the study that to enhance the performance and growth of the enterprises, government and policy rlated organizations need to consider important variables that have positive impact in supplying the entrepreneurial resources especially, developing the net-working relationship.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.35-38
• /
• 2005

The Objective of this work was to design Composite Antenna Structures (CAS) and investigate impact behavior of CAS which was various curvature. This term, CAS, indicates that structural surface becomes antenna. Constituent materials were selected considering electrical properties, dielectric constants and tangent loss as well as mechanical properties. For the antenna performance, microstrip antenna layers inserted into structural layers were designed for satellite communication at the resonant frequency of 12.5 GHz and final demonstration article was. After making five kinds of curved CAS, which radii of curvature are flat, 200, 150, 100, 50 mm. The antenna performance changed in accordance with variation of curvature. The Reflection coefficient was independent of curvature but the gain decreased with the radius of curvature. The impact test equipment was Dyna-8250 drop weight tester. The impact characteristic in accordance with curvature is maximum absorb energy is same each other. The impact energy was 8.5 J. For various Impact energy test, five energy levels 3 J, 5 J, 7 J, 10 J, 20 J were used. The performance of impact damaged antenna was estimated by measuring the return loss and the radiation pattern. It was revealed that the performance of antenna was not related to the impact damage. Because the impactor did not damage the patch directly. CAS have good impact stability for the antenna performance.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.30-34
• /
• 2012

A safety helmet is a personal protective equipment to protect the head from falling and flying objects. A safety helmet has the maximum delivered impact force as shock absorption performance, the lower delivered impact force the better performance, which was not a controlled variety during manufacturing safety helmet. Accordingly there were some difficulties in establishing the standard for improved performance as there was not a clear controllable impact force for improved performance. In this study the shock absorption performance was intended to be found as coefficient of restitution related to impulse. As a research method, a coefficient of restitution during the absorption of shock was calculated using the impulse transferred to pharynx utilizing the safety helmet shock absorption performance testing device based on the theory of momentum and impulse. The estimated impulsive force curve was derived assuming that shock was not absorbed using the measured data. The sample was selected as tested goods of ABS material for safety certification available mainly in the market. As a result of study, the maximum delivered impact force of safety helmet made by a domestic safety certified a company was 735 N, and its coefficient of restitution proved to be 0.64. The smaller coefficient of restitution is, the lower maximum delivered impact force and the higher shock absorption performance. The coefficient of restitution can be used as a performance index of safety helmet.

• Structural Engineering and Mechanics
• /
• v.32 no.5
• /
• pp.685-699
• /
• 2009

Current research and development of high performance concrete, together with study of phenomena that are pertinent to impact resistance, have lead to a new generation of barriers with improved properties to resist impact loads. The paper reviews major properties and mechanisms that affect impact resistance of concrete barriers as per criteria that characterize the resistance. These criteria are the perforation limit, penetration depth and the amount of front and rear face damage. From the long-known, single strength parameter that used to represent the barriers' impact resistance, more of the concrete mix ingredients are now considered to be effective in determining it. It is shown that the size and hardness of the aggregates, use of steel fibers and micro-silica have different effects on performance under impact and on the resistance. Additional pertinent phenomena, such as the rate and size effects, confinement and local versus global response, are pointed out with their reference to possible future developments in the design of impact resisting concrete barriers.

• Land and Housing Review
• /
• v.5 no.2
• /
• pp.81-89
• /
• 2014

This paper presents various attempts to secure the floor impact sound insulation performance on the dry floor system of steel framed modular house that lately attracted domestic attention. Test results show that in the condition of using dry floor system of D31(D32), the light-weight impact noise performance records the top level in the floor impact sound insulation performance grading system. the heavy-weight floor impact noise performance meets the minimum sound level limit in the floor impact sound insulation performance grading system that enacted regulation on housing construction standards.

• KIEAE Journal
• /
• v.12 no.1
• /
• pp.73-81
• /
• 2012

Floor impact sound has been most annoying for years among the noises which are produced in apartment. This study aims to analyze the improvement of floor impact sound by comparing the results of the test which was carried out for the wall slab type apartment and moment frame apartment, and also for the effect of advanced vibration isolation layer. Moment frame structure that main structure consists of column and slab has shown better performance for the heavyweight impact sound comparing with wall slab type structure which is general type in Korea. Stiffness of floor system was raised by reinforcing the stiffness of vibration isolation layer, and it was analyzed how much the floor impact sound performance was improved. The result showed that the reinforced floor had better performance than the existing floor system that uses lightweight porous concrete as vibration isolation material. In addition, a system used wire mesh in mortar showed improvement of floor impact sound than a system without wire mesh, and better performance for the frequency bands lower than 160 Hz which causes floor impact problem in wall slab type apartment.

• The Journal of Information Systems
• /
• v.20 no.3
• /
• pp.161-186
• /
• 2011

To date, SCM research has mainly focused on the effects of controlled variables on SCM success and emphasized adoption strategies and critical success factors. Consequently, the effects of more uncontrolled variables such as partnership between SCM partners have been largely ignored. The purpose of this study, therefore, is to examine the effects of both controlled variables and uncontrolled variables on SCM performance through affecting RTE characteristics. The six factors examined in this study include Quality of information, partnership quality, Forecasting, Agility, Visibility, and SCM performance. In this study, SCM Performance was divided into three categories: Quality Performance, Cost Performance, Delivery Performance. All factors were examined from the perspective of part suppliers. The results of this study can be summarized as follows. First, SCM information quality positively affected SCM partnership quality, Forecasting, Agility, Visibility. Second, SCM partnership quality positively affected Forecasting, Agility. But, SCM partnership quality showed no significant effect on Visibility. Third, Forecasting had a significant impact on SCM performance. According to the detailed result of measuring SCM performance with Quality Performance, Cost Performance, Delivery Performance, although Forecasting affects Cost Performance, Delivery Performance directly, it does not affect Quality Performance directly. Fourth, Agility also had a significant impact on SCM performance. According to the detailed result of measuring SCM performance, Agility has significant impact on Quality Performance, Cost Performance, Delivery Performance. Fifth, Visibility, as expected, had a significant impact on SCM performance. According to the detailed result of measuring SCM performance, Visibility has significant impact on Quality Performance, Cost Performance, Delivery Performance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.280-285
• /
• 2012

The 1st assessment (performance test) was applied to assure the floor impact sound performance for developing the dry double- floor with the change of rubber hardness of the upper panel's support and the ceiling structure of the sub-floor. Depends on the change of the rubber hardness in substructure, the heavy-weight sound impact value is improved up to 3 dB, and the light-weight sound impact value is moved up to 21 dB, comparing with the bare-slab. Also, the improved value for the floor impact sound conjugating with the sub-floor's ceiling was 5dB. Based on this result, the 2nd assessment (performance test) was made the state that the rubber hardness of the sub-floor support was ranged between 50 and 70 for considering the stability of walking patients. In addition to this process, the assessment was carried out with a variety of ceiling structure applied to the dry doublefloor structure with the air flow system on the sub-floor's ceiling. The result for the 2nd assessment proved that TYPE-11 had the better sound reduction performance in the heavy-weight impact sound test than other types, and also for the light-weight impact sound TYPE-11 had the 29 dB sound reduction performance overall. Henceforth, based on the result the research for the sound reduction performance from the floor impact sound shall be ongoing process as well as the development of a double-dry floor and a sound reduction ceiling to suitable on the field.