• 한국정밀공학회지
• /
• 제20권6호
• /
• pp.230-237
• /
• 2003

On this study, we operated the dynamic response for impact load of impact absorbing system for spreader by the finite element analysis and showed respectively the spring constant and the damping coefficient which the reaction force by impact was the lowest value for three types impact absorbing system according to the change of system, also we presented the change of impact reaction force according to the spring constant and the damping coefficient. Additionally, among the three types impact absorbing system according to the change of system, the reaction force of model II was the lowest value and the next model which has higher value than model II was model Iand model III has the highest value in the three types.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.689-693
• /
• 1997

This paper deals wth the impact and the transient analysis of the impact absorbing system consist of double damping. piston and sprlng system in spreader to increaas efficlcncy of it. It shows the optimum damping coefficient and spring constant under the limited stroku of Impact absorbing system using for crane spreader and the optimum condition of impact absorbing system causing certain reaction force as time. which is characteristic of dashpot and rubber. This system absorbed 11.5 and 88.5 % impact energq at the spring and the damper respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1529-1532
• /
• 2003

This paper deals with the impact analysis of the impact absorbing system consist of one degree of freedom and two degree of freedom damping-spring system in spreader to increase efficiency of it. It shows the optimum damping coefficient and spring constant of impact absorbing system using for crane spreader and the optimum condition of impact absorbing system causing certain contact impulse. In the optimal model, the contact impulse is reduced 98.57 percent and 92.22 percent respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.745-748
• /
• 2002

Many malfunctions take place in container crane spreader due to impact. So we designed a 2DOF hydraulic impact absorbing system and studied the change of impulse with respect to the variation of falling height and weight. The falling height becomes higher than 1m and the falling weight goes up heavier than 100kg, the impact absorbing rate was lower. When spreader is bumped against container and impulse force concentrates on one point, impact absorbing equipment would not be operated properly and make some trouble.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.871-874
• /
• 2002

Many malfunctions take place in container crane spreader due to impact. So we designed a 2DOF hydraulic impact absorbing system with multi-step damping coefficient and studied the effect of orifice's interval and damping coefficient. The damping coefficient of upper piston was found to be 180 N.s/m, and the orifice's interval to be 9mm, the max reaction force and the average reaction force might be lowest. Compared with a general 2-DOF impact absorbing system, the max reaction force reduced by 46%., and average reaction force reduced by 5%.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.197-202
• /
• 2014

Floor Impact Noise is a structure-borne noise which is mainly caused by vibration of concrete slabs. The majority of previous studies have focused on investigating performance of absorbing sheets on the reduction of floor impact noise. But absorbing sheets do not efficiently reduce heavy-weight floor impact noise level because it cannot absorb slab vibration, which is the fundamental noise source. In this study, double-floor system was developed in order to reduce floor impact noise level in residual buildings. This floor system reduces heavy-weight impact noise level by reducing vibration response at the center of slab, which has maximum amplitude in the 1st vibration mode. In order to identify the performance of the double-floor system, experiments were planned. Primary test parameters are span of double floor, arrangement and types of absorbing sheets.

• Composites Research
• /
• 제35권6호
• /
• pp.469-476
• /
• 2022

본 논문에서는 주기패턴 레이더 흡수 구조(RAS)에 다양한 손상을 모사하기 위한 저속충격시험을 수행하고 파손모드에 따른 전자기파 흡수 성능 특성 변화를 평가하였다. 주기패턴 레이더 흡수 구조는 주기패턴시트(PPS) 및 유리섬유강화플라스틱(GFRP)으로 구성되며 설계 및 제작된 구조는 X-band(8.2-12.4 GHz)에서 효과적으로 전자기파를 흡수하였다. 제작된 레이더 흡수 구조에 다양한 손상을 유도하기 위해 충격에너지에 따른 저속충격시험을 수행하였으며, 육안검사, 비파괴 검사 및 이미지 프로세싱을 이용하여 발생한 손상모드 확인 및 손상영역을 정량화하였다. 충격 전, 후 레이더 흡수 구조의 전자기파 흡수 성능은 자유공간 측정 시스템을 이용하여 평가하였다. 시험결과, 15 J의 낮은 충격에너지로 인해 발생한 크기가 작은 층간분리는 레이더 흡수 구조의 전자기파 흡수성능 변화에 큰 영향을 미치지 않았다. 그러나 충격에너지를 40 J 또는 60 J로 증가시켜 상대적으로 넓은 영역의 섬유파손 또는 관통파손이 발생한 구조에서는 전자기파 흡수 성능이 크게 저하되는 것을 확인하였다.

• 한국산업경영시스템학회:학술대회논문집
• /
• 한국산업경영시스템학회 2002년도 춘계학술대회
• /
• pp.291-296
• /
• 2002

The midsole hardness of athletic footwear affects capability of absorbing impact shock and controls rearfoot movement during running and walking. The prior studies were focused on examining the proper hardness of footwear for rearfoot movement or to finding effective hardness for absorbing impact shock. The displacements of maximal Achilles tendon angle described a amount of pronation motion is decreased when medial hardness of midsole is large more than lateral. Increasing hardness of footwear midsole are effected to reduce maximum and intial pronation angle, but declined the ability of impact shock during heelstrike. For determination of effectiveness hardness of midsole, therefore, the study that makes a compromise between rearfoot movement and absorbing impact during footstrike must be performed. The purpose of this study is to examine quantitative values of rearfoot control and absorbing impact shock with different hardness of medial and lateral midsole on heel portion. The results are useful to define biomechanical hardness of midsole for developing running shoes. As variable for impact shock, accelerations onto shank and knee are measured during 4 running speeds (5, 7, 9, 11km/h). Also, maximum and $10\%$ pronation angle (Achilles tendon angle) were measured using high-speed camera.

• 연구논문집
• /
• 통권25호
• /
• pp.23-29
• /
• 1995

Steering column is a typical component that may injure the driver at a frontal collision accident. To protect the driver from an impact, it is very important to study the impact absorbing behaviour of steering column. The dynamic simulation were performed for the ball sleeve type impact absorbing steering column. The simulation results show similar trends to FMVSS 203 test results. Hence using the simulation program developed in this study, it is possible to predict dynamic response of steering system which is used in design modification. Impact absorbing performance of the ball sleeve type steering column with the column angle of $21^\circC$ and $26^\circC$ satisfies the safety criterion of FMVSS 203.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.765-768
• /
• 1997

Many malfunctions take place in container crane spreader due to impact. So we designed a hydraulic impact absorbing equipment to absorb the impact and we studied the change of damping coefficient with respect to the variation of dimensions of oil-cylinder wall. When we design the dimension of hydraulic cylinder wall considering the displacement on the wall, the value of it over 20mm didn't affect the damping coefficient.