• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.339-342
• /
• 1999

The equation of output voltage from the PVDF was derived. When impact force applied to the PVDF films of cantilever beam and one-end fixed, other-end supported beam structure, output voltage equation induced. Experimental output voltages by falling ball agreed quite well with induced theoretical data. This PVDF film showers to be in high possibility in a warning system of abnormal pulse rate and breathing, and in detecting impact force and/or mechanical energy.

• Journal of Surface Science and Engineering
• /
• v.34 no.6
• /
• pp.575-584
• /
• 2001

Erosion due to abrasive particles contained in gas streams from boilers has been emerged as a significant problem in the coal fired power plants. Particle erosion accounted for approximately 50% of boiler failures and especially flyash erosion was responsible for 20~30% of emergency boiler shutdowns. Particularly, because of the high ash loading and high velocity, most erosion occurs in the boiler tubes and economiser tube bank where the direction of the gas stream changes to $180^{\circ}$ .In this study, a high temperature particle erosion tester was used to evaluate erosion rate in a simulated environment. The erosion parameters such as erosion temperature, particle impact angle, particle velocity and various particle size were changed. Flyash is the combustion product of the pulverized coal, where size is ranging from 1 to $200\mu\textrm{m}$. Flyash composed of mainly SiO$_2$, $A1_2$$_O3$, and $Fe_2$$O_3$has dense spherical particles and irregular particles containing numerous pores and cavities. From the erosion tests at various conditions, the maximum erosion was experienced at impact angles of $30^{\circ}$ to $60^{\circ}$ In addition, erosion rate increased in proportional to velocity and temperature. And from the observation of the eroded surfaces, it was also concluded that 304 stainless steel was mainly eroded by extrusion-forging at high impact angle ($90^{\circ}$) and by microcutting mechanism at low impact angles ($30^{\circ}$ and $45^{\circ}$).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1630-1635
• /
• 2005

The microstructure of the parts made by the microcellular injection molding process influence properties, including impact strength, tensile strength and density of material. Microstructure of microcellular plastics is divided into core foaming region and solid skin region. Core foaming region is influenced by pressure drop rate, viscosity and cell coalescence. However, actual mechanism of the skin layers is not known despite its importance. The study on the skin layer is getting important because foaming rate of the plastics is determined by the thickness ratio of the skin layer. Especially in case of large molded part, control of the skin layer is needed because skin layer thickness is changed largely. Therefore it is necessary to study variation in skin layer thickness with processing parameters. In this paper, the influence of temperatures in the mold cavity on the skin layer s thickness was also addressed. In addition, the relationship between the temperature distributions across cavity of the mold with impact strength on parts made with the microcellular injection molding process was addressed. In addition, the method to predict the variation in skin layer thickness with mold temperature is discussed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.9
• /
• pp.1093-1100
• /
• 2004

Numerical analysis of the heat transfer associated with droplet impact on a hot solid surface is performed by solving the equations governing conservation of mass, momentum and energy in the liquid and gas phases. The deformed droplet shape is tracked by a level set method which is modified to achieve volume conservation and to include the effect of contact angle at the wall. The numerical method is validated through the calculations for the cases reported in the literature. Based on the numerical results, the heat transfer rate is found to depend strongly on the droplet spread radius. Decreased advancing/receding contact angles enlarge the splat radius and in turn enhance the wall heat flux. The effect of impact velocity on the droplet spread is reduced as the droplet size decreases. Also, droplet atomization is observed to significantly enhance the heat transfer rate and the effect is pronounced for a smaller size of droplet. An existing model equation to predict the maximum spread radius is improved for application to a micro droplet.

• Journal of Preventive Medicine and Public Health
• /
• v.42 no.5
• /
• pp.293-297
• /
• 2009

Objectives : To evaluate the impact of the workplace smoking ban in South Korea, where the male smoking rate is high (57%), on smoking behavior and secondhand smoke exposure. Methods : A workplace smoking ban legislation implemented in April 2003 requires offices, meeting rooms, and lobbies located in larger than 3,000 square meter buildings (or 2,000 square meter multipurpose buildings) should be smoke free. A representative cross-sectional survey, the third wave (2005) of health supplements in the National Health Nutrition Survey of South Korea, was used to measure the impact of the 2003 workplace smoking ban implementation on smoking behavior. It contained 3,122 observations of adults 20 to 65 years old (excluding selfemployed and non-working populations). A multivariate statistical model was used. The self-reported workplace smoking ban policy (full workplace ban, partial workplace ban, and no workplace ban) was used as the key measure. Results : A full workplace smoking ban reduced the current smoking rate by 6.4 percentage points among all workers and also decreased the average daily consumption among smokers by 3.7 cigarettes relative to no smoking ban. Secondhand smoke showed a dramatic decrease of 86 percent (= -1.74/2.03)from the sample mean for full workplace ban. However, public anti-smoking campaign did not show any significant impact on smoking behavior. Conclusions : The full workplace ban policy is effective in South Korea. Male group showed bigger impact of smoking ban policy than female group. The public antismoking campaign did not show any effectiveness.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.859-864
• /
• 2015

This paper analyzes the impact of Plug-in Electric vehicles(PEVs) on power demand and voltage change when PEVs are connected to the domestic distribution system. Specifically, it assesses PEVs charging load by charging method in accordance with PEVs penetration scenarios, its percentage of total load, and voltage range under load conditions. Concretely, we develop EMTDC modelling to perform a voltage distribution analysis when the PEVs charging system by their charging scenario was connected to the distribution system under the load condition. Furthermore we present evaluation algorithm to determine whether it is possible to adjust it such that it is in the allowed range by applying ULTC when the voltage change rate by PEVs charging scenario exceed its allowed range. Also, detailed analysis of the impact of PEVs on power distribution system was carried out by calculating existing electric power load and additional PEVs charge load by each scenario on new-town in Korea to estimate total load increases, and also by interpreting the subsequent voltage range for system circuits and demonstrating conditions for countermeasures. It was concluded that total loads including PEVs charging load on new-town distribution system in Korea by PEVs penetration scenario increase significantly, and the voltage range when considering ULTC, is allowable in terms of voltage tolerance range up to a PEVs penetration of 20% by scenario. Finally, we propose the charging capacity of PEVs that can delay the reinforcement of power distribution system while satisfying the permitted voltage change rate conditions when PEVs charging load is connected to the power distribution system by their charging penetration scenario.

• Journal of Urban Science
• /
• v.9 no.1
• /
• pp.41-49
• /
• 2020

This study analyzed the factors affecting economic growth using multiple regression model and Geographically Weighted Regression in consideration of population, industry and employment, housing and political characteristics on economic growth by region. The analysis results are summarized as follows. First, the total employment growth rate, manufacturing employment growth rate, local election turnout and the level of party consensus between the central and local governments are having a positive impact on regional economic growth. Second, according to the GWR analysis, the population has a positive impact on economic growth in the southern region of Korea, and the increase in the total number of employees has a positive impact on the southern region of Gyeonggi Province, Gangwon Province, North Chungcheong Province and North Gyeongsang Province. Finally, the voter turnout of urbanites is positively affecting economic growth in South Chungcheong Province, Gangwon Province and the southern coast, while North Jeolla and South Jeolla provinces have a positive impact on economic growth as the parties of the central and local governments are equal. The results of this study may suggest the role of local government for regional economic development.

• Ecology and Resilient Infrastructure
• /
• v.3 no.2
• /
• pp.126-129
• /
• 2016

The risk of flooding and groundwater depletion is increasing due to the increase of impervious area in an urban area that reduces the volume of infiltration and increases the outflow of rainwater. The objective of this study is to examine the impact of installation of roadside tree protectors with infiltration pipes in terms of the change of the infiltration rate. Through this study, it has been attested that roadside tree protectors with infiltration pipes increased the infiltration rate and decreased water level on the ground, and could be applied in an urban area as the low impact development (LID) facilities.

• Journal of Distribution Science
• /
• v.15 no.3
• /
• pp.17-25
• /
• 2017

Purpose - The study is to examine the impact of the US Purchasing Managers' Index (PMI) on Korea and the US industrial economy including the distribution industry. We analyze its effect on the industrial economy centered on the distribution industry using economy indices in Korea and the US. Research design, data, and methodology - The variables are used to analyze the dynamic relationship which occurs among the US PMI, the industrial production index, producer price index, unemployment rate, and manufacturing Inventories Index in Korea and the US from January 1990 to July 2016 using Vector Error Correction Model. Results - As a main result, the impact of the US PMI on all the economy indices both Korea and the US has the same cyclical movement. The US PMI is positively related to the producer price and the industrial production index of Korea and the US, while it is negatively related to unemployment rate, and the manufacturing inventories index in Korea and the US. Conclusions - The US PMI as an advanced index has a power to predict the economies on Korea and the US. In the end, we find that the US PMI has a great impact on Korea and the US industrial economy.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.3
• /
• pp.1395-1403
• /
• 2021

The COVID-19 pandemic is having an adverse impact on Bangladesh's economy by affecting millions of people's life and hampering their income sources. The outbreak of COVID-19 has created more pressure on the labor market. The pandemic reduces employment opportunities as most of the companies have stopped their recruitment process to cut their operational costs, which increases the rate of graduate unemployment in Bangladesh. Hence, this study aims to investigate the impact of COVID-19 on graduate employability in Bangladesh that adversely affects the income of families and eventually the nation's economy. A literature review has been conducted from secondary sources to evaluate the impact, which shows that the rate of graduate unemployment increased from 47% to 58% in 2020 with an expected annual loss estimated at $53 million. Findings also reveal that the prime reasons for graduate employability are low demand and huge supply of graduates in the labor market, lack of professional skills of graduates, ineffective education system, etc. The study suggests that the government of Bangladesh should develop some policies to overcome this problem such as ensuring employment subsidies, implementing skills development programs, improving labor market flexibility, initiating credit programs for generating employment, and developing entrepreneurial ecosystems in Bangladesh.