Aquaplast Thermoplastic (AT) is a tissue-equivalent oral compensator that has been developed to improve dose uniformity at the common boundary and around the treated area during radiotherapy in patients with head and neck cancer. In order to assess the usefulness of AT, the degree of improvement in dose distribution and physical properties were compared to those of oral compensators made using paraffin, alginate, and putty, which are materials conventionally used in dental imprinting. To assess the physical properties, strength evaluations (compression and drop evaluations) and natural deformation evaluations (volume change over time) were performed; a Gafchromic EBT2 film and a glass dosimeter inserted into a developed phantom for dose verification were used to measure the common boundary dose and the beam profile to assess the dose delivery. When the natural deformation of the oral compensators was assessed over a two-month period, alginate exhibited a maximum of 80% change in volume from moisture evaporation, while the remaining tissue-equivalent properties, including those of AT, showed a change in volume that was less than 3%. In a free-fall test at a height of 1.5 m (repeated 5 times as a strength evaluation), paraffin was easily damaged by the impact, but AT exhibited no damage from the fall. In compressive strength testing, AT was not destroyed even at 8 times the force needed for paraffin. In dose verification using a glass dosimeter, the results showed that in a single test, the tissue-equivalent (about 80 Hounsfield Units [HU]) AT delivered about 4.9% lower surface dose in terms of delivery of an output coefficient (monitor unit), which was 4% lower than putty and exhibited a value of about 1,000 HU or higher during a dose delivery of the same formulation. In addition, when the incident direction of the beam was used as a reference, the uniformity of the dose, as assessed from the beam profile at the boundary after passing through the oral compensators, was 11.41, 3.98, and 4.30 for air, AT, and putty, respectively. The AT oral compensator had a higher strength and lower probability of material transformation than the oral compensators conventionally used as a tissue-equivalent material, and a uniform dose distribution was successfully formed at the boundary and surrounding area including the mouth. It was also possible to deliver a uniformly formulated dose and reduce the skin dose delivery.
Japan started to colonize Korea in 1910. It's when It forced and made Chosun sign on the Treaty of Protectorate. The Chosun faithfully practiced Japan's colonial policy over Korea. Futhermore, it stopped many Koreans from an anti-Japanese movement and tried to make Koreans have a positive attitude towards Japan. For this, Japan advertised the policy called Nae-sun-il-che which meant Korea and Japan were a community together from the same root. Ultimately, it targeted on absorbing Korea within their territory. With this goal, Japan kept on practicing the policy to acculturize and brainwash Koreans, totally depending on force and pressure from 1910 to 1919. However, this policy had changed by the overall anti-Japanese movement happening on March 1st 1919. Saito, the third governor-general who was appointed laster on, made an effort to win over He favor of Koreans in a less forceful way of the cultural politics. The change of policy had been specified in diverse actions such as permitting civil mass-media bodies forming the observation groups and opening conferences. In the case of daily newspapers, Japan had permitted only the ones by the Government-General of Chosun such as Maeil-shinbo, Kyunsung-ilbo, and Seoul Press before, but then other civil newspapers In Korean stated to be released. Along His Japan formed both Korean and Japanese observation groups to promote the mutual understanding and showed off Japan's goods in the propaganda films by implementing a film department. It's because Japan totally recognized and understood the impact of films. Therefore, Japan distincitively established a film agency for the production of propaganda movies while it banned the civil film production after 1937 when Japan started the war against China and USA in row. So, only one film agency, ruled by the Government-General of Chosun, produced movies from 1942 to 1945.
Purpose: It is expected that various infrastructures diagnosis equipment will be needed as infrastructures management is strengthened to implement the Framework Act on Sustainable Infrastructure Management. It is necessary for a certification system to supply certified products of a reasonable level in accordance with market requirements for various convergence equipment. This paper deals with the introduction of certification system of inspection and diagnosis equipment for infrastructure using advanced technologies. Method: The basic elements, systems and procedures of certification system were reviewed through analyzing and comparing the existing similar certification system in Korea. In addition, a survey was conducted on a catalog method and the minimum performance criterion (sampling survey and complete enumeration survey) to equipment developers (manufacturers), clients and equipment users. Result: This survey showed that clients preferred complete enumeration method on the basis of minimum performance, and equipment users also preferred complete enumeration survey and sample survey, for minimum performance, at a similar rate. On the other hand, equipment developers preferred the catalog method. Conclusion: Clients and users who are the users of the diagnostic equipment preferred the minimum performance criterion because their trust in quality is important. On the other hand, developers(manufacturers) preferred the catalog method which adopts self certification because it is regulated in developing various products. There is no specific plan for the minimum performance standards required for the introduction of the method which users demand, at present. In addition, it is not desirable to force to introduce a certification system because it requires a considerable period of study to prepare the specific standards. Therefore, it is appropriate to operate the system for a certain period of time centering around the catalog method for the stable and continuous development of the infrastructure diagnosis and test equipment market in Korea. Also, it is effective to expand and develop the certification system to the extent that it minimizes the impact on the market when specific plans for the standards are prepared in the future.
The purpose of this study is to secure objective and precise data through ecosystem monitoring, to reveal ecological characteristics through comparison and analysis with past survey data, and to accumulate basic data for diagnosing the current situation and predicting changes in the ecosystem. The target site is the 'Quercus mongolica forest on the Buksa-myeon of Namsan', which was designated as an Ecological Landscape Conservation Area (ELCA) of Seoul in July 2006. The research contents are analysis of soil environment change (1986~2016), change of actual vegetation (1978~2016), and change of plant community structure (1994~2016). A total of 8 fixed surveys (400~1,200m2) were established in 1994 and 2000. Analysis items are importance value, species and population, and Shannon's species diversity. The soil environment of Namsan is acidic (pH 4.40 in 2016), which is expected to have a negative impact on tree growth and vegetation structure due to its low capacity for exchangeable cations. Quercus mongolica forest in Namsan is mainly distributed on the northern slopes. The actual vegetation area changed from 49.4% in 1978 → 80.7% in 1986 → 82.4% in 2000 → 88.3% in 2005 → 88.3% in 2009 → 70.3% in 2016. In 2016, the forest decreased by 18% compared to 2009. While there was increased growth of Quercus mongolica in the tree layer from 2009 to 2016, the overall decline in vegetation area was due to logging and fumigation management following the spread of oak wilt in 2012. As for the changes in the plant community structure, Quercus mongolica of the tree layer was damaged by oak wilt, and the potential vegetation that can form the next generation was ambiguous. In the subtree layer, the force of urbanization tree species such as Styrax japonicus, Sorbus alnifolia, and Acer palmatum. was maintained or increased. In the shrub layer, the number of trees and species increased significantly due to the open tree crown, and accordingly, the species diversity of Shannon for woody plants also increased. In Quercus mongolica forest of Namsan, various ecological changes are occurring due to the effects of urban environments such as air pollution and acid rain, the limitation of Quercus mongolica pure forest due to oak wilt, and the introduction of exotic species, thus, it is necessary to establish a management plan through continuous monitoring.
The timely procurement of military supplies is essential to maintain the military's operational capabilities, and contract work is the first step toward timely procurement. In addition, rapid signing of a contract enables consumers to set a leisurely delivery date and increases the possibility of budget execution, so it is essential to improve the contract process to prevent early execution of the budget and transfer or disuse. Recently, research using big data has been actively conducted in various fields, and process analysis using big data and process mining, an improvement technique, are also widely used in the private sector. However, the analysis of contract work in the military is limited to the level of individual analysis such as identifying the cause of each problem case of budget transfer and disuse contracts using the experience and fragmentary information of the person in charge. In order to improve the contract process, this study analyzed using the process mining technique with data on a total of 560 contract tasks directly contracted by the Department of Finance of the Air Force Logistics Command for about one year from November 2019. Process maps were derived by synthesizing distributed data, and process flow, execution time analysis, bottleneck analysis, and additional detailed analysis were conducted. As a result of the analysis, it was found that review/modification occurred repeatedly after request in a number of contracts. Repeated reviews/modifications have a significant impact on the delay in the number of days to complete the cost calculation, which has also been clearly revealed through bottleneck visualization. Review/modification occurs in more than 60% of the top 5 departments with many contract requests, and it usually occurs in the first half of the year when requests are concentrated, which means that a thorough review is required before requesting contracts from the required departments. In addition, the contract work of the Department of Finance was carried out in accordance with the procedures according to laws and regulations, but it was found that it was necessary to adjust the order of some tasks. This study is the first case of using process mining for the analysis of contract work in the military. Based on this, if further research is conducted to apply process mining to various tasks in the military, it is expected that the efficiency of various tasks can be derived.
Despite the uncertainty and risky factors of startups, the special and critical role of accelerators in carrying out professional nurturing and investment for them is becoming increasingly significant in the startup social-system. However, academic research on investment determinants that have a profound impact on the survival of accelerators is lacking, and there are only a few empirical studies on the classification and importance of factors, and they do not enjoy the benefits of theoretical studies. This study proposes a business model innovation framework based on the business model innovation theory that reflects the nature and properties of startups that are investment targets of accelerators and derives 12 investment decision factors. The framework defines that the target, direction, and performable force of startup innovation are a business model, strategy, and dynamic capability. Besides, the framework analyzes the investment decision factors of the existing accelerators based on the business model innovation framework to verify the suitability and sufficiency of the composition. As a result of the analysis, first, most of the items were faithfully composed from a static point of view of business model innovation, but it was found that the factors related to the core activities to evaluate the activity and customer relationship were insufficient. Second, from the strategic point of view, the necessity of developing factors that can encompass the definition and content of core resources, which are internal strategic factors, was raised. Third, from the dynamic point of view, it was found that many of the investment determinants of accelerators were concentrated on the lower level of dynamic competencies. This can be judged as a result of reflecting the characteristics of a startup that needs to develop a solution with few resources and a small number of team members. In addition, the roles and interrelationships between each factor are not clear, thus it was found as a limiting point for startups to view and evaluate the direction and process in which startups dynamically innovate their business models. This study is considerably differentiated in that it provides a business model innovation framework and offers a theoretical basis for investment determinants by deriving the investment determinants of accelerators based on the framework and design the foundation for subsequent research. The business model innovation framework presented in this study has great implications in that it contributes to the achievement of startups, accelerators, and startup support organizations.
The scarcity is pervasive aspect of human life and is a fundamental precondition of economic behavior of consumers. Also, the effect of scarcity message is a power social influence principle used by marketers to increase the subjective desirability of products. Because valuable objects are often scare, consumers tend to infer the scarce objects are valuable. Marketers often do base promotional appeals on the principle of scarcity to increase the subjective desirability their products among consumers. Specially, advertisers and retailers often promote their products using restrictions. These restriction act to constraint consumers' ability th take advantage of the promotion and can assume several forms. For example, some promotions are advertised as limited time offers, while others limit the quantity that can be bought at the deal price by employing the statements such as 'limit one per consumer,' 'limit 5 per customer,' 'limited products for special commemoration celebration,' Some retailers use statements extensively. A recent weekly flyer by a prominent retailer limited purchase quantities on 50% of the specials advertised on front page. When consumers saw these phrase, they often infer value from the product that has limited availability or is promoted as being scarce. But, the past researchers explored a direct relationship between the purchase quantity and time limit on deal purchase intention. They also don't explored that all restriction message are not created equal. Namely, we thought that different restrictions signal deal value in different ways or different mechanism. Consumers appear to perceive that time limits are used to attract consumers to the brand, while quantity limits are necessary to reduce stockpiling. This suggests other possible differences across restrictions. For example, quantity limits could imply product quality (i.e., this product at this price is so good that purchases must be limited). In contrast, purchase preconditions force the consumer to spend a certain amount to qualify for the deal, which suggests that inferences about the absolute quality of the promoted item would decline from purchase limits (highest quality) to time limits to purchase preconditions (lowest quality). This might be expected to be particularly true for unfamiliar brands. However, a critical but elusive issue in scarcity message research is the impacts of a inferred motives on the promoted scarcity message. The past researchers not explored possibility of inferred motives on the scarcity message context. Despite various type to the quantity limits message, they didn't separated scarcity message among the quantity limits. Therefore, we apply a stricter definition of scarcity message(i.e. quantity limits) and consider scarcity message type(general scarcity message vs. special scarcity message), scarcity depth(high vs. low). The purpose of this study is to examine the effect of the scarcity message on the consumer's purchase intension. Specifically, we investigate the effect of general versus special scarcity messages on the consumer's purchase intention using the level of the scarcity depth as moderators. In other words, we postulates that the scarcity message type and scarcity depth play an essential moderating role in the relationship between the inferred motives and purchase intention. In other worlds, different from the past studies, we examine the interplay between the perceived motives and scarcity type, and between the perceived motives and scarcity depth. Both of these constructs have been examined in isolation, but a key question is whether they interact to produce an effect in reaction to the scarcity message type or scarcity depth increase. The perceived motive Inference behind the scarcity message will have important impact on consumers' reactions to the degree of scarcity depth increase. In relation ti this general question, we investigate the following specific issues. First, does consumers' inferred motives weaken the positive relationship between the scarcity depth decrease and the consumers' purchase intention, and if so, how much does it attenuate this relationship? Second, we examine the interplay between the scarcity message type and the consumers' purchase intention in the context of the scarcity depth decrease. Third, we study whether scarcity message type and scarcity depth directly affect the consumers' purchase intention. For the answer of these questions, this research is composed of 2(intention inference: existence vs. nonexistence)
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70