• Steel and Composite Structures
• /
• 제49권6호
• /
• pp.685-699
• /
• 2023

In recent years, Carbon Fibre Reinforced Plastic (CFRP) strengthening is found to be one of the best methods to strengthen steel structures. The fibrous bond can also influence the vibration characteristics of the strengthened element apart from its static strength enhancement property. The main objective of this study is to understand the influence of CFRP strengthening on the dynamic Behaviour of Thin-Webbed Castellated Beams (TWCBs). A detailed experimental investigation was carried out on five sets of beams with varying parameters such as domination of shear (Shear Dominant, Moment Dominant and Moment and Shear Dominant), sectional classification (Plastic and Semi-compact) and perforation geometries (h_o/d_wratio 0.65 and e/h_o ratio 0.3). Free vibration analysis was carried out by exciting the simply supported TWCBs with an impact force generated by a ball dropped from a specific height. Logarithmic decrement method was used to obtain the damping ratio and natural frequencies of vibration were found by Fast Fourier Transform (FFT). Natural frequency showed an increase in a range of 10.5 - 55% for the different sets of castellated beams. An increase of 62.30% was noted in the damping ratio of TWCBs after strengthening which is an indication of improvement in the vibration characteristics of the beam.

• Tribology and Lubricants
• /
• 제31권3호
• /
• pp.95-101
• /
• 2015

Carbon nanotubes (CNTs) are widely used in polymer composites as filler materials to enhance various characteristics of the composites because of their remarkable mechanical, electrical, and thermal properties. In this study, we investigate the effects of MWCNTs on the electrical and wear characteristics of high-impact polystyrene (HIPS) composites, and compare the results with the effects of carbon black (CB). The HIPS composites are classified as Bare-HIPS, MWCNT-HIPS composites containing 2, 3, 4, and 5 wt% MWCNTs, and CB-HIPS containing 17 wt% CB. Electrical characteristics are evaluated by measuring the surface resistance using a 4-point probe. Wear characteristics are evaluated using the reciprocating wear test, and a chrome steel ball with a curvature of 6.3 mm is used as the counterpart. The results show that the addition of MWCNTs or CB can improve the electrical and wear characteristics of HIPS composites. In the case of MWCNT-HIPS composites, surface resistance, friction coefficient, and specific wear rate decrease as the concentrations of MWCNTs increase. Moreover, the addition of MWCNTs is more effective in improving the electrical and wear characteristics of HIPS composites compared to the addition of CB. To fabricate the HIPS composite with appropriate electrical and wear characteristics, more than 4 wt% MWCNTs is added to HIPS.

• 마이크로전자및패키징학회지
• /
• 제15권4호
• /
• pp.77-86
• /
• 2008

본 연구에서는 유연솔더인 63Sn37Pb와 무연 솔더인 95.5Sn4.0Ag0.5Cu와 97Sn2.5Ag0.5Cu BGA(Ball Grid Array) 패키지를 인쇄회로기판(Printed Circuit Board, PCB)에 위치에 따라 장착하고 보드레벨의 낙하시험(Board Level Drop Test)을 실시하여 충격에 대한 유 무연 솔더의 특성을 분석하였고 4점굽힘시험(board Level 4-point Bending Test)을 실시하여 굽힘에 대한 솔더볼의 기계적 저항특성을 분석하였다. 또한 유한요소법(Finite Element Modeling, FEM)을 이용해 낙하시험과 4점굽힘시험에서 솔더 조인트에 미치는 응력과 변형률을 해석하였으며, 시험 설계 시에 솔더 조인트의 응력변화에 영향을 미칠 수 있는 변수를 고려하여 해석하고 결과를 비교 분석하였다. 낙하시험과 4점굽힘시험에서 모두 무연솔더는 유연솔더보다 2배 이상 높은 신뢰성을 보였으며, PCB의 중앙에 위치한 패키지는 외각에 위치한 패키지 보다 매우 낮은 신뢰성을 보였다. 유한요소법을 통해 해석한 결과 최외각 솔더에서 가장 큰 응력이 발생하였고, 솔더의 조성과, 시험설계변수에 의해 응력의 발생 정도가 다름을 나타내었다.

• 한국응용과학기술학회지
• /
• 제38권2호
• /
• pp.532-542
• /
• 2021

본 연구의 목적은 골프 스윙 시 3가지 스탠스에서 클럽헤드 스피드와 볼의 정확성을 유지하기 위한 신체 전략을 하지의 운동학적 변인과 지면반력 변인을 통하여 알아보고자 하였다. 연구의 대상은 공식 핸디캡이 2인 남자골프선수 10명으로 하였다. 모든 대상자들은 스탠스 조건(스퀘어, 오픈, 클로즈드)에 따라 어드레스 자세를 유지한 후 스윙을 수행하였다. 3차원 동작분석 시스템과 지면반력기를 이용하여 각 스탠스에 따라 7번 아이언 풀스윙을 수행한 결과를 산출하였다. 연구결과로 신체중심의 변위, 고관절 각변위, 무릎관절 각변위는 차이가 나타나지 않았다. 발목관절 각변위는 어드레스부터 다운스윙까지 왼쪽에서 오픈 스탠스가 저측굴곡이 크게 수행되었고, 오른쪽에서 클로즈드 스탠스에서 저측굴곡이 크게 수행되었다. 지면반력에서 전후, 수직은 차이가 없었지만, 어드레스부터 테이크백까지 왼발은 오른쪽 방향, 오른발은 왼쪽 방향의 힘이 오픈이 클로즈드 스탠스보다 크게 나타났다. 결론적으로 다양한 스탠스에도 불구하고, 임팩트 시 동일한 자세를 유지하는 것이 클럽헤드 스피드와 볼의 방향에 긍정적으로 작용되는 것으로 판단된다.

• KCI Concrete Journal
• /
• 제13권2호
• /
• pp.10-18
• /
• 2001

The spectral analysis of surface waves (SASW) method, which is an in-situ seismic technique, has mainly been developed and used for many years to determine the stiffness profile of layered media (such as asphalt concrete and layered soils) in an infinite half-space. This paper presents a modified experimental technique for nondestructive evaluation of in-place cement mortar compressive strength in single-layer concrete slabs of rather a finite thickness through a correlation to surface wave velocity. This correlation can be used in the quality control of early age cement mortar structures and in evaluating the integrity of structural members where the infinite half space condition is not met. In the proposed SASW field test, the surface of the structural members is subjected to an impact, using a 12 mm steel ball, to generate surface wave energy at various frequencies. Two accelerometer receivers detect the energy transmitted through the medium. By digitizing the analog receiver outputs, and recording the signals for spectral analysis, surface wave velocities can be identified. Modifications to the SASW method includes the reduction of boundary reflections as adopted on the surface waves before the point where the reflected compression waves reach the receivers. In this study, the correlation between the surface wave velocity and the compressive strength of cement mortar is developed using one 36"x36"x4"(91.44$\times$91.44$\times$91.44 cm) cement mortar slab of 2,000 psi (140 kgf/$\textrm{cm}^2$) and two 36"x36"x4"(91.44$\times$91.44$\times$91.44 cm) cement mortar slabs of 3,000 psi (210 kgf/$\textrm{cm}^2$).

• 한국운동역학회지
• /
• 제20권1호
• /
• pp.41-47
• /
• 2010

The purpose of this study was to evaluate the kinematic effect of upper extremity usage for the scoccer instep kick motion. Ten male university students were recruited as the subjects. Temporal parameters, ball velocity, velocity of CG, angle of segment, angular velocity, and trunk orientation angle were determined for each trial. The results showed that temporal parameters in WU and WORU were significantly less than those found in WOU during pre impact phase. These indicated that no usage of upper extremity may increase excessive setup time in order to improve the accuracy of instep kick. Angle of right knee in WOU at LC was significantly greater than corresponding value for WU since angular momentum contributions of the lower limb were not effectively balanced by contributions of the upper limb. We found that the lower extremity movement was controlled by lateral movement in the trunk as a result of no usage of the upper extremity, resulting in the relatively greater trunk rotation in WOU.

• 대한지리학회지
• /
• 제49권1호
• /
• pp.57-76
• /
• 2014

전통적으로 전쟁의 확산에 관한 연구는, 전쟁에 참여하는 양국의 관계에 초점을 맞추어왔으며 국가 간의 관계가 전쟁의 과정에서 변하지 않는다는 가정에 기반하여 왔다. 본 연구는 기존의 접근방법이 전쟁 확산의 공간적 측면을 설명하기에는 부족함을 보여주고 있다. 네트워크 공간에서의 전쟁확산을 이해하기 위해, 사회연결망 분석을 이용하여 제1차 세계대전에 참전한 국가의 행위를 분석하였다. 사회연결망 분석기법의 적용은 기존의 갈등연구에서 나타나고 있는 물리적 공간과 네트워크의 이분법적 이해를 극복하는 시도가 된다. 연구의 결과는, 국가들이 맺는 관계(지속적인 갈등, 동맹)가 만들어내는 네트워크의 구조적 속성이 개별 국가 간의 관계만큼이나 중요하다는 것을 보여주고 있다. 또한 분쟁의 확산을 이끌어내는 요인이 전쟁이 진행되면서 변화한다는 점을 확인할 수 있는데, 지리적 인접성은 전쟁 초기에는 중요하지만 전쟁이 확산됨에 따라 동맹관계, 기존에 유지되어온 적대적 관계와 이로써 생성되는 국제관계의 네트워크 구조가 더욱 중요한 것으로 나타났다.

• 한국산업보건학회지
• /
• 제16권2호
• /
• pp.110-122
• /
• 2006

Objective : This study was conducted to quantify chronic lead exposure from various media(ie. working environment, food, ambient air), and to certify the usefulness of exposure assessment using Monte-Carlo simulation in the fields of occupational health. Methods : Data were obtained from Korean Industrial Health Association, Korea Food and Drug Administration, and the Ministry of Environment. Then lead worker's exposure was estimated indirectly from various media and parameters (ie. volume inhaled, body weight, dietary intake, etc.). Uncertainty was analyzed by Monte Carlo simulation with Crystal Ball software. Exposure doses and hazard indices were simulated with various hypothetical scenarios including weekly working hours and respiratory protective equipment. Results : Without respiratory protective equipment, the total exposure dose per kilogram of body weight of lead workers was estimated as $5.45{\times}10^{-3}mg/kg/day$, and hazard index was estimated as 2.26, and exposure contributions were calculated as follows : working environment(82.42 %); foods(17.57 %); and ambient air(0.01 %). But, if working condition has changed - reduction of working hours and using respiratory protective equipment, the total exposure dose per kilogram of body weight was estimated between $1.34{\times}10^{-3}-1.49{\times}10^{-3}mg/kg/day$, and hazard index was estimated between 0.56 - 0.62. Conclusions : This study suggested that occurrence of hazardous impact(ie. increased blood pressure) through lifetime lead exposure would be expected, and that the Monte-Carlo simulation was useful for the fields of occupational health.

• 대한통합의학회지
• /
• 제3권4호
• /
• pp.37-42
• /
• 2015

Purpose: This study was conducted to test the impact of The Dynamic Visual-Motor integration training has effect on the visual perception reaction velocity. Dynavision were used to measure data from the participating 24 students(K college). Method : The participants were the 24 students of 'K' College in Busan in there twenties. They were divided into the The Dynamic Visual-Motor integration training group and the control group. To know if the Dynamic Visual-Motor integration training has effect on the visual perception reaction velocity, the Dynamic Visual-Motor integration training was implemented triweekly for 4 weeks. In Dynamic Visual-Motor integration training the ball should be grasped with one hand and threw by an arm. Only the balls threw beyond the objective point were counted. The visual perception reaction velocity and the number of response were measured before and after experiment by Dynavision. Result : Firstly, the visual perception reaction velocity was increased in Dynamic Visual-Motor integration training group compared with control group. Secondly, the number of response was also increased in Dynamic Visual-Motor integration training group compared with control group. Conclusion : As a result of The Dynamic Visual-Motor integration training has an effect on the visual perception reaction velocity and the number of response. The Dynamic Visual-Motor integration training seems to be effective for cerebral apoplexy patient who has visual perceptional disability or cerebral palsy child in training for visual perceptional development or daily living activities development. Study participated by more detailed and practical patients in hospital is needed.

• 한국가스학회지
• /
• 제8권3호
• /
• pp.1-7
• /
• 2004

최근 가스관용으로 압력손실이 큰 동관의 사용은 점차 줄어들고 있는 추세이며, 한편으로는 폴리에틸렌관이 신소재배관재료로서 사용되어 지고 있다. 폴리에틸렌관은 화학적으로 안정성이 높아 부식에 강하고 반영구적으로 사용할 수 있으며, 유연성이 좋아 설치와 유지관리가 편한 장점이 있다. 그러나 외부에 노출되었을 때 쉽게 열화되므로, 주로 저압가스용 매설배관으로서 사용하고 있는 실정이다 그러나 매설배관으로 사용되는 폴리에틸렌관의 사용 중에 발생하는 결함에 대한 비파괴적 평가에 대한 연구는 거의 없다. 본 연구에서는 폴리에틸렌 배관의 건전성을 평가하기 위해 다양한 결함을 상정하여 볼 베어링 충격시험에 따른 음향방출에 의한 신호특성을 평가하였다. 폴리에틸렌 배관의 결함 형상에 따라 파형 및 중심주파수의 구별이 가능하였다. 특히, 노치결함이 있는 경우 노치의 각도와 깊이에 따라 AE신호의 특성이 다르게 나타났다.