• Fisheries and Aquatic Sciences
• /
• 제26권1호
• /
• pp.48-57
• /
• 2023

One of the ways to increase the production for aquaculture is through the cultivation of monosexuals by ensuring genital reversal from which energy for reproduction is diverted towards growth. Masculinization has been identified as one of the most prominent techniques, where sex development was directed from female to male. This approach only altered the phenotype and not the genotype. The red claw crayfish (Cherax quadricarinatus) was a relatively new commercial commodity, and the males were known to grow faster than females. Hence, it was proposed to use monocultures comprising an all-male population to increase yield using steroid hormone, synthetic 17α-methyltestosterone. However, this technique generated residues that detrimentally affect human health, the environment, and cultivated organisms. Therefore, finding new safe natural steroid sources was essential, and one of which is exploring of natural hormones extracted from the viscera of sea cucumbers (Holothuria scabra Jaeger). This study focused on the determination of male formation and testosterone levels among juvenile crayfish, after immersing in sea cucumber steroid extract (SCSE). A completely random design with factorial was used with two variables, encompassing the varied doses (0, 2, 4 mg/L, 2 mg/L 17α-methyl testosterone as control group) and immersion times of 18 and 30 h. The result showed the dose-dependent ability of SCSE increase the male genital formation and promote the testosterone level of juvenile crayfish. In addition, the testosterone was influenced by dose and immersion duration time, with the highest level of testosterone observed in treatments of 4 mg/L SCSE with 30 h immersion was 0.248 ng/mL, while the male percentage was 77%. In conclusion, the combination of dose and immersion time significantly affected growth and testosterone levels.

• 한국콘텐츠학회논문지
• /
• 제17권1호
• /
• pp.270-286
• /
• 2017

서비스를 제공해주는데 있어서 대기시간 관리는 매우 중요하다. 대기는 현대사회에서 서비스를 받는데 있어 피할 수 없는 경험이며 서비스 만족도에 악영향을 미치기도 한다. 사용자가 서비스 대기 시간에 겪게 되는 경험의 의미가 무엇인지 알기 위해 대기시간의 사용자 경험에 영향을 미치는 요인과 그로 인해 사용자가 겪게 되는 경험들을 탐색해 보았다. 그 결과 대기 경험의 총체적인 시퀀스를 4단계로 나눠 밝혀냈으며, 인지된 시간 자체 보다는 기대하는 시간과 인지된 시간의 차이가 중요하고, 주문 이전 보다 이후의 대기가 더 중요하다는 사실을 발견할 수 있었다. 또한 사용자는 대기 중 자이가르닉 효과에 의해 시간을 더 길게 느끼고 주위 눈치를 보기 때문에 미디어에 몰입하지 못한다는 사실도 발견하였다. 도출된 발견들을 통해 대기시간에 사용자가 보는 미디어의 끝을 서비스를 제공받는 시점과 일치시키는 완성된 느낌을 제공해야 하며, 사용자가 최대한 정확한 대기시간을 예측할 수 있도록 예측 가능성을 제공해야 하고, 마지막으로 사용자가 대기시간 동안 주도권을 가지고 있다고 느끼게 해야 한다는 세 가지 서비스 디자인 원칙을 제시하였다. 추가적으로 그 목적으로 가는 단계적이고 현실적인 대안도 제시하였다. 이는 서비스 제공자 가 전략 구축 시 디자인 원칙으로 활용하여 서비스 고객 만족도를 높일 수 있을 것이다.

• 한국식품과학회지
• /
• 제24권4호
• /
• pp.335-340
• /
• 1992

무의 염절임 과정에서 일어나는 염의 확산과 관련하여 무의 조직 변화를 측정하고 시간의 함수와 관련된 기계적인 모델을 제시하였다. 침지 염용액의 농도와 침지 온도가 증가할수록 염의 확산은 더 잘 일어났으나 침지온도보다는 염용액의 농도에 의해서 더 많은 염의 확산에 영향을 미쳤다. 염장하지 않은 무는 높은 조직의 강도와 점탄성을 보였으나 온도와 소금농도를 증가시킴에 따라 초기 응력에 대한 조직의 강도 약화를 보여주었으며 응력완화의 정도도 빨라졌고 평형 상태에서 남아있는 탄성 고체의 양도 감소하였다. 또한 침지 용액의 농도와 온도가 증가할수록 무 조직의 점탄성 성분들도 낮아졌는데, 무의 조직변화도 염장 온도보다 염용액의 농도에 의해서 더 많은 영향을 받았다. $Ca^{2+}$과 $Mg^{2+}$이온을 첨가한 경우 점탄성 상수들은 더 큰 것으로 나타났으나 일정 변형에서의 응력의 완화는 더 빠르게 진행되었다. 일정 염농도, 일정 염장 농도와 비순수 소금을 사용했을 때 평형에 도달하기 전의 임의의 시간이 경과한 후에 무 조직의 최종 강도 변화를 점탄성 상수를 이용하여 예측하는 일반식을 제시하였다.

• Journal of Photoscience
• /
• 제5권4호
• /
• pp.169-174
• /
• 1998

Photosynthetic responses to dehydration were examined by the simulataneous measurement of O2 evolution and chlorophyll (Chl) fluorescence in green pepper leaves. Dehydration was induced by immersing the plant roots directly in the Hoagland solution containing varying concentration (2-30%) of polyethylene glycol(PEG-6000) . Water potential of the leaf was decreased time-and concentation -dependently by PEG-treatment. The decrease in water potential of leaf was correlated with the decrease in both the maximal photosynthesis (Pmax) and quantum yield of O2 evolution, but Pmax dropped more rapidly than quantum yield at all water deficit conditions tested. However, Chl fluorescence parameters were not affected much. Dehydration did not change the initial fluorescence (Fo) and maximum photochemical efficiency(Fv/Fm) of photosystem(PS) II. Both the photochemical quenching (qP) and non-photochemical quenching(NPQ) were not changed by dehydration under low PFR(50 $\mu$mols m-2s-1 ). In contrast, under high PFR(270$\mu$mols m-2s-1)qP was slightly decreased while NPQ was greatly increased. The fast induction kinetics of Chl fluroecence showed no change in Chl fluorescence pattern by dehydration at high PFR (640 $\mu$mols m-2s-1 ), but exhibited a significant drop in peak level(Fp)at low PRFR (70$\mu$mols m-2s-1 ). PS I oxidation and reduction kinetics revealed normal reduction but delayed oxidation to P-700+, suggesting no lesionin electron flow from PSII to PSI , but impaired electron transport to NADP+,These results suggest that water stress caused by PEG-treatment results in the reduction of photosynthesis, promarily due to the reducted electron trasport from PSI to NADP+ or hampered subsequent steps involving Calvin Cycle.

• 대한치과교정학회지
• /
• 제41권2호
• /
• pp.121-126
• /
• 2011

Objective: The purpose of this study was to evaluate shear bond strength (SBS) and failure site location of brackets bonded to enamel with or without desensitizer application. Methods: Sixty-six freshly extracted human premolar teeth were randomly divided into 3 groups of 22. Group 1 served as the control. Desensitizer was applied to the remaining teeth at two time intervals (Group 2, bonded immediately after Pro-$Relief^{TM}$ (Colgate-Palmolive Co., New York, NY, USA) application and Group 3, bonded 30 days after Pro-$Relief^{TM}$ application with the teeth stored in artificial saliva during the 30 days). Orthodontic brackets were bonded with a light cure composite resin and cured with a halogen light. After bonding, the SBS of the brackets was tested using a universal testing device. Adhesive remnant index (ARI) scores were determined after the brackets failed. Data were analyzed with analysis of variance, Tukey's HSD, and G tests. Results: The SBS was significantly lower in Group 2 than in Groups 1 (p = 0.024) and 3 (p = 0.017). Groups 1 and Group 3 did not differ (p = 0.991). ARI scores did not differ significantly among groups. Conclusions: The Pro-$Relief^{TM}$ desensitizer agent applied immediately before bonding significantly reduces bond strength, but the SBS values still exceed the minimum 5.9 - 7.8 MPa required for adequate clinical performance. Immersing the teeth in artificial saliva for 30 days after applying the Pro-$Relief^{TM}$ desensitizer agent and before bonding increased the SBS to control levels.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술대회지
• /
• pp.71-76
• /
• 2004

This paper investigate that the effect of the concrete containing mineral admixtures(pozzolanic materials such as fly-ash, ground granulated blast-furnace slag, silica fume and meta kaolin) on the resistance properties to chloride ion invasion. The purposed testing procedure was applied to the concrete added mineral admixtures for $3\sim4$ replacement ratios under W/B ratios ranged from 0.40 to 0.55. Specimens were immersed in $3.6\%$ NaCl solution for 330 days, and penetration depth, water soluble chloride contents and acid soluble chloride contents were measured in 28, 91, 182 and 330 days. Then, diffusion coefficient were calculated using total chloride contents. As a results. the kinds of mineral admixture and replacement ratios had a great effect on the resistance property of the concrete to chloride ion invasion compared with the plain concrete. And the optimal replacement ratios of mineral admixture had a limitation for each admixtures. The amount of acid soluble chloride ions and water soluble chloride ions were varied with the kinds of mineral admixtures and the penetration depth from the concrete skin. Chloride diffusion coefficient of each concretes decreased with the time elapsed. and the diffusion coefficients of the concrete immersed salt water for 330 days had a establishment with the compressive strength measured before immersing.

• 한국분말재료학회지
• /
• 제12권3호
• /
• pp.186-191
• /
• 2005

A formation of aluminum hydroxide by hydrolysis of nano and micro aluminum powder has been studied. The nano aluminum powder of 80 to 100 nm in diameter was fabricated by a pulsed wire evaporation (PWE) method. The micro powder was commercial product with more than $10\;{\mu}m$ in diameter. The hydroxide type and morphology depending on size of the aluminum powder were examined by several analyses such as XRD, TEM, and BET. The hydrolysis procedure of micro aluminum powder was different from that of nano aluminum powder. The nano aluminum powder after immersing in the water was transformed rapidly to a nano fibrous boehmite, accompanying with a remarkable temperature increase, and then further transformed slowly to a stable bayerite. However, the micro powder was changed to the stable bayerite slowly and directly. The formation of fibrous aluminum hydroxide from nano aluminum powder might be due to the fine cracks which were formed by hydrogen gas pressure on the surface hydroxide layer during hydrolysis. The nano powder with large specific surface area and small size reacted more actively and faster than the micro powder, and transformed to meta-stable hydroxide in relatively short reaction time. Therefore, the formation of fibrous boehmite is special characteristic of hydrolysis of nano aluminum powder.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.1-7
• /
• 2008

A study of new materials that are light-weight, high in strength has become vital to the machinery of auto industries. But then, there are a lot of problems with developing such materials that require expensive tools, and a great deal of time and effort. Therefore, the improvement of fatigue strength and fatigue life are mainly focused on by adopting residual stress. And Influence of corrosive condition for corrosion fatigue crack was investigated, after immersing in 3.5%NaCl, $10%HNO_3$+3.5%HF, $6%FeCl_3$. The immersion period was performed for 365days. The compressive residual stress was imposed on the surface according to each shot velocity based on shot peening, which is the method of improving fatigue life and strength. Fatigue life shows more improvement in the shot peened material than in the un peened material in corrosion conditions. The threshold stress intensity factor range was decreased in corrosion environments over ambient. Compressive residual stress of surface on the Shot-peen processed operate resistance force of fatigue crack propagation. The fatigue crack growth rate of the Shot-peened material was lower than that of the un peened material. Also m, fatigue crack growth exponent and number of cycle of the shot peened material was higher than that of the un peened material. That is concluded from effect of da/dN.

• Food Science and Biotechnology
• /
• 제14권1호
• /
• pp.42-45
• /
• 2005

The present study was carried out to envisage the aerobic growth of Listeria monocytogenes and Yersinia enterocolitica on pork, which is one of the major meat sources in Korea. The results were compared with the previously developed predictive model systems for the verification of microbial growth in a real situation during pork processing. Pork loin samples (8.0 g, 5 mm thick) were aseptically prepared and inoculated with each pathogen by immersing into the respective inoculums for one min. Each of the samples were then wrapped with PE film and stored at 5, 10, and $15^{\circ}C$ up to 36 days to measure the growth profile of the respective pathogens. The growth parameters were calculated by using Gompertz equation and were compared with the previously reported data. The predicted generation time (GT) of L. monocytogenes at 5, 10 and $15^{\circ}C$ was 28.74, 7.85 and 4.02 hr, respectively, and for Y. enterocolitica was 10.29, 4.74 and 2.50 hr, at the same temperatures respectively. In this study, the GT values predicted on pork were slightly higher than the values predicted in other studies using liquid model systems. Unlike previous reports, both the pathogens were found to grow at $5^{\circ}C$ on pork. This finding recommends the necessity of controlling the growth of both the pathogens during the slaughtering process and distribution.

• Corrosion Science and Technology
• /
• 제6권5호
• /
• pp.257-260
• /
• 2007

In order to further improve the corrosion resistance and wear resistance of the Ni-P coatings of electroless plating, electroless Ni-P/n-$Al_2O_3$ composite deposits were prepared by adding some nano $Al_2O_3$ Particles in Ni-P plating bath. The bath composition and proproties were studied in this paper. The orthogonal test was applied in order to get the new composite solution, taking the initial stable potential as evaluation standard and considering the elements correlation at the same time. The processing parameters have been optimized by single factor experiment in which the depositing speed was chosen as the evaluation standard. The results showed that the process is stable and the composite Ni-P/n-$Al_2O_3$ deposits werebright and smooth, whose hardness and corrosion resistance are much better than simple Ni-P coatings. Furthermore the surface appearance and structure of the composite Ni-P/n-$Al_2O_3$ coating were investigated by SEM and XRD method. It was proved that the coating surface is typical cystiform cells and its structure is amorphous. All test results ofcomposite coating showed that all various physical coating properties had been improved by adding nano-particles. The hardness of optimal coating is more than 600HV and increases to 1000HV after heat-treating, and its hardness is 20~50% higher than Ni-P coating. The rust points appeared in 200 hour by immersing the coating into the 10%HCl solution and the corrosive speed is $3{\times}10^{-3}mg/(cm^2{\cdot}h)$which was obtained after 300 hour. In the same condition Ni-P coating is $5.6{\times}10^{-3}mg/(cm^2{\cdot}h)$. The salt spray resistance of the layers can exceed 600h with the thickness $20{\mu}m$.