• Bulletin of the Korean Chemical Society
• /
• 제30권12호
• /
• pp.2887-2889
• /
• 2009

An efficient and easy method for one-pot three-component synthesis of amidoalkyl naphthols by the condensation of aromatic/heteroaromatic/aliphatic aldehydes, 2-naphthol and amides or urea under thermal condition at $60^{\circ}C$ in the presence of acidic ionic liquid 1-butyl-3-methylimidazolium hydrogen sulphate ([bmim]$HSO_4$) has been described.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3373-3377
• /
• 2012

A series of polystyrene-supported 1-(propyl-3-sulfonate)-3-methyl-imidazolium hydrosulfate acidic ionic liquid (PS-$[SO_3H-PMIM][HSO_4]$) catalysts were prepared and tested for mononitration of simple aromatics compounds with nitric acid. It was found that the reactivity of the catalysts increased with increasing $[SO_3H-PMIM][HSO_4]$ content. The para-selectivity was not only related to the $[SO_3H-PMIM][HSO_4]$ content but also the substituent groups in aromatics. A reaction mechanism of nitration over this new catalyst was proposed. The catalytic activity of this catalyst decreased slightly after fifth runs in the synthesis of nitrotoluene.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.829-833
• /
• 2007

IPMC-EMIM (Ionic Polyer Metal Composites + 1-ethyl-3- methyl imidazolium trifluromethane sulfonate, EMIM-Tfo) is fabricated by substituting ionic liquid for water in Nafion film, which improves water sensitiveness of IPMC and guarantees uniform performance regardless of the surrounding environment. In this paper, we will introduce the design and analysis of AF Lens Actuator using IPMC-EMIM. We will briefly introduce the procedure of fabrication of IPMC-EMIM first, and proceed on to define the necessary variables, analyze performance by changing the value of the variables, make a designed AF Lens Actuator, and measure the performance of one of them.

• 폴리머
• /
• 제29권2호
• /
• pp.216-220
• /
• 2005

본 연구에서는 폴리(에틸렌 글리콜) 디아크릴레이트(PEGDA) 고분자 매트릭스에 이온성 액체인 1-butyl-3-methyl-imidazolium bis((trifluoromethyl) sulfonyl) amide$(BuMeIm^+Tf_2N^-)$로 구성된 전해질 용액을 함유하는 젤 형태의 고분자 전해질을 제조하였다. 이온성 액체가 고분자 전해질의 이온 전도도에 미치는 영향을 조사하였으며, 기존의 유기 용매를 넣은 고분자 전해질보다 높은 이온 전도도$(ca.\;10^{-3}S/cm)$와 전기 화학적 안정성을 나타냄을 알 수 있었다.

• Korean Chemical Engineering Research
• /
• 제51권3호
• /
• pp.347-351
• /
• 2013

글리세롤과 요소의 카르보닐화 반응에 의한 글리세롤카보네이트(GC)의 제조반응에 대하여 이온성 액체 촉매의 특성을 조사한 결과 사용된 4급암모늄염 촉매와 이미다졸염 촉매의 알킬기의 길이가 짧을수록, 할로겐 음이온의 친핵성이 클수록 촉매의 활성은 증가하였다. TBAC 촉매에 대해서 반응변수인 반응온도, 반응시간, 진공도가 반응에 미치는 영향을 고찰하였다. $ZnCl_2$를 조촉매로 사용한 경우 각각 촉매의 활성보다 더 높은 활성을 나타내어 시너지 효과가 관찰되었으며, 이것은 혼합촉매의 산-염기적 특성에 기인하는 것으로 판단된다.

• Korean Chemical Engineering Research
• /
• 제48권3호
• /
• pp.332-336
• /
• 2010

이미다졸염 형태의 이온성 액체를 구조유도체를 사용하지 않고 솔-젤 법으로 무정형 실리카에 담지시켜 고정화된 이온성 액체 촉매를 제조하였다. 이 촉매를 에틸렌카보네이트와 메탄올과의 에스테르 교환반응에 의한 디메틸카보네이트(DMC)의 합성 반응에 사용한 결과 우수한 촉매 활성을 나타내었다. DMC 합성 반응을 두 단계의 반응식으로 가정한 모델을 설정하여 반응온도와 촉매량을 변화시켜 실험한 결과와 비교한 속도론적 연구에서 실험 결과가 반응모델에 잘 일치하는 것을 알 수 있었다. 이로부터 계산한 유사 활성화 에너지 값은 67.4 kJ/mol 이었다.

• 분석과학
• /
• 제24권6호
• /
• pp.477-483
• /
• 2011

본 연구는 supercapacitor에 사용되는 전해액인 이온성 액체 EMI-$BF_4$ (1-ethyl-3-methyl imidazolium tetrafluoroborate)를 제조 한 다음 산화알루미늄과 활성탄 그리고 액체/액체 연속 추출방법을 이용하여 고순도의 이온성 액체를 얻기 위한 정제방법을 연구하였다. 산화알루미늄과 활성탄을 이용한 정제는 고순도 이온성 액체를 얻기에는 부적합 하였고 액체/액체 연속 추출을 통한 정제과정에서 용매제의 변화에 따른 전기적 용량을 비교한 결과 이온성 액체 대비 증류수 비율을 높게 할수록 불순물제거율이 높으며 또한 supercapacitor의 전기적 성능이 좋게 나왔다. 그리고 추출용매는 1,2-dichloroethane을 이용할 경우 methylene chloride으로 추출할 때 보다 고순도의 이온성 액체를 얻었으며 또한 전기적 용량이 높게 나왔다.

• Bulletin of the Korean Chemical Society
• /
• 제32권6호
• /
• pp.2058-2062
• /
• 2011

The effect of the addition of ionic liquids with four different cations (imidazolium, pyrrolidinium, piperidinium and pyridinium) on the performance of dye-sensitized $TiO_2$ solar cells based on electrolytes containing a t-butylpyridine (TBP) in 3-methoxypropionitrile (MPN) was studied. A total of 18 ionic liquids with mono-, di- and tri-alkyl derivatives were used in the present study, and among them a pyridinium cation with a mono-alkyl group showed better cell efficiency than the others. The best photoelectric conversion efficiency, 7.213%, was obtained using 1-hexylpyridinium iodide with an open-circuit photovoltage ($V_{oc}$) = 0.731 V, a short-circuit photocurrent density ($J_{sc}$) = 16.175 $mA/cm^2$, and a fill factor (ff) = 0.610 under AM1.5 and 100 $mW/cm^2$ illumination.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3259-3264
• /
• 2010

A label-free amperometric immunosensor has been proposed for the detection of myeloperoxidase (MPO) in human serum. To fabricate such an immunosensor, a composite film consisting of N,N-dimethylformamide (DMF), multiwall carbon nanotubes (MWCNTs) and 1-ethyl-3-methyl imidazolium tetrafluoroborate ($EMIMBF_4$) suspension was initially formed on a glassy carbon electrode (GCE). Then cerium dioxide ($CeO_2$) dispersed by chitosan was coated on the GCE. After that, MPO antibodies (anti-MPO) were attached onto the nano$CeO_2$ surface. With a noncompetitive immunoassay format, the antibody-antigen complex formed between the immobilized anti-MPO and MPO in sample solution. The immunosensor was characterized by cyclic voltammetry, transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The factors influencing the performance of the immunosensor were studied in detail. Under optimal conditions, the current change before and after the immunoreaction was proportional to MPO concentration in the range of 5 to $300\;ng\;mL^{-1}$ with a detection limit of $0.2\;ng\;mL^{-1}$.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3771-3776
• /
• 2013

1-Alkyl-3-methylimidazolium chloride-LiCl melts were prepared from the reaction of 1-alkyl-3-methylimidazolium chloride ([RMIm]Cl; R=allyl or n-butyl) and lithium chloride, and their ability to dissolve cellulose was evaluated. The solubility of cellulose was greatly increased to 320% when [RMIm]Cl was replaced by [RMIm][$LiCl_2$]. Dissolved cellulose in LiCl/[RMIm]Cl melts was successfully regenerated by adding water and LiCl/[RMIm]Cl melts were easily recovered by removing water. As supported by the computational results, the higher solubility of cellulose in [RMIm][$LiCl_2$] can be ascribed to the increased bond distance between anion and C(2)-H of the imidazolium ring compared with that in [RMIm]Cl, thereby resulting in the increased interaction between $[LiCl_2]^-$ and the hydroxyl groups of cellulose.