• Journal of the Korean earth science society
• /
• v.30 no.5
• /
• pp.529-549
• /
• 2009

In 2007, just after the recession of the Changma, anomalously long rainy period (from July 30 to August 15) occurred in Korea. To identify the cause of the sustained rainy period, we performed synoptic analysis and the associated air motions. The behavior of each air parcel trajectory associated with atmospheric motion was then investigated. As a result, three particular phenomena occurring at latitudes lower than $40^{\circ}N$ were discovered. First, a mass of relatively cold air, referred to as E, made a deep intrusion from $20^{\circ}N$ to $60^{\circ}N$. Second, this intrusion was accompanied by another mass of air called dE. It was colder and drier than E and originated from the mid-troposphere over the tropical ocean. Third, dE and E rotated clockwise three times over a period of 17 days over the Northwestern Pacific and blocked the westerly waves imbedded in the zonal flow from propagating. Two additional phenomena were observed at latitudes higher than $40^{\circ}N$. First, the cold core system, while approaching from the west with low geopotential values at its center, was stagnated over Shanxi China. It enhanced the northward intrusion of dE and E, and then diminished. The subsequent low system showed similar evolution as the first one. Second, a warm core anticyclone was formed over Lake Baikal, blocking the westerlies for 13 days and contributed to the persistent northward incursion of warm moist air. Moreover, a horizontally extended intrusion of upper level clouds from the tropics to $50^{\circ}N$, which may be interpreted as a tropical plume, was found around the end of the period (from August 12 to 15, 2007) with successive tropical nights over Korea.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1059-1067
• /
• 2006

AODV(Ad-hoc On-demand Distance Vector) routing protocol was devised for use of mobile nodes in Ad-hoc network. When we use the AODV routing protocol in Ad-hoc networks with high mobility, disturbance of optimized route path and link break occur. In order to solve the shortcomings, this paper proposes a new routing protocol in which new routing control messages are added to the existing AODV. The proposed protocol minimizes link break and transmission delay while is able to secure the optimized route path constantly in changes of network topology The performance of the proposed routing protocol was evaluated by using us2 network simulator. The actual Ad-hoc network test bed provides us the most reliable experimental data for Ad-hoc networks. In order to support this experimental environment, the dissertation also developed an efficient embedded system on which AODV routing protocol, NAT, Netfilter can run and other event message can be verified without declining efficiency. The correct operation of AODV routing protocol has been verified in both the Ad-hoc network test bed in which the embedded system was used, and Ad-hoc networks linked with Ethernet backbone network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2C
• /
• pp.156-165
• /
• 2006

In this paper, a new intelligent moving target tracking and surveillance system basing on the pan/tilt-embedded stereo camera system is suggested and implemented. In the proposed system, once the face area of a target is detected from the input stereo image by using a YCbCr color model and phase-type correlation scheme and then, using this data as well as the geometric information of the tracking system, the distance and 3D information of the target are effectively extracted in real-time. Basing on these extracted data the pan/tilted-imbedded stereo camera system is adaptively controlled and as a result, the proposed system can track the target adaptively under the various circumstance of the target. From some experiments using 480 frames of the test input stereo image, it is analyzed that a standard variation between the measured and computed the estimated target's height and an error ratio between the measured and computed 3D coordinate values of the target is also kept to be very low value of 1.03 and 1.18$\%$ on average, respectively. From these good experimental results a possibility of implementing a new real-time intelligent stereo target tracking and surveillance system using the proposed scheme is finally suggested.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.2
• /
• pp.242-246
• /
• 2005

RFID(Radio Frequency Identification) which is emerging from a change in digital convergence paradigm and recently rapidly advancing throughout the overall society is the core technology based on Ubiquitous network. In other words, This is a technology to identify the information of the object and recognize the situation by attaching electrical tag to an object and using Reader that can read the information of the object. With the emergence of the technology, it has turned the existing maintenance of the product into the network and intelligence of the product control by using the bar cord to maintain the product and will lead a revolution throughout overall society by affecting the fields of distribution and product maintenance as well as those of medicines, chemicals and food which the electrical tag can be attached to. his paper shows that utilizing the Bluetooth which is a local wireless telecommunication in the standalone imbedded system can implement the piconet configuration among the Readers and the data telecommunication with the main server.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.6
• /
• pp.529-536
• /
• 2015

A defect could be generated in bolts for a use of oil filters for the manufacturing process and then may affect to the safety and quality in bolts. Also, fine defects may be imbedded in oil filter system. So it is very important that such defects be investigated and screened during the multiple manufacturing processes. Therefore, in order effectively to evaluate the fine defects, the FEM simulations were performed to make characterization in the crack detection of the bolts and the parameters such as number of turns of the coil, the coil size, applied frequency were calculated based on the simulation results. Simulations were carried out for the defect signal of eddy current probe. Exciter and receiver were utilized. In this paper, the FEM simulations were performed in both bobbin-type and pancake-type probe, both probes were optimized under Eddy current FEM simulations and the results of calculation were discussed.

• Journal of KIISE:Software and Applications
• /
• v.41 no.8
• /
• pp.586-597
• /
• 2014

The next generation mobile computing technology is recently attracting attention that smartphone and wearable device imbedded with various sensors are being deployed in the world. Existing activity and posture recognition research can be divided into two different ways considering feature of one's movement. While activity recognition focuses on catching distinct pattern according to continuous movement, posture recognition focuses on sudden change of posture and body orientation. There is a lack of research constructing a system mixing two separate patterns which could be applied in real world. In this paper, we propose a method to use both smartphone and wearable device to recognize activity and posture in the same time. To use smartphone and wearable sensor data together, we designed a pre-processing method and constructed recognition model mixing signal vector magnitude and orientation pattern features of vertical and horizontal. We considered cycling, fast/slow walking and running activities, and postures such as standing, sitting, and laying down. We confirmed the performance and validity by experiment, and proved the feasibility in real world.

• Composites Research
• /
• v.16 no.3
• /
• pp.58-67
• /
• 2003

To perform the realtime strain and fracture monitoring of the smart composite structures, two optical fiber sensor systems are proposed. The two types of the coherent sources were used for fracture signal detection - EDFA with FBG and EDFA with Fabry-Perot filter. These sources were coupled to EFPI sensors imbedded in composite specimens. To understand the characteristics of matrix crack signals, at first, we performed tensile tests using surface attached PZT sensors by changing the thickness and width of the specimens. This paper describes the implementation of time-frequency analysis such as short time Fourier transform (STFT) and wavelet transform (WT) for the quantitative evaluation of fracture signals. The experimental result shows the distinctive signal features in frequency domain due to the different specimen shapes. And, from the test of tensile load monitoring using optical fiber sensor systems, measured strain agreed with the value of electric strain gage and the fracture detection system could detect the moment of damage with high sensitivity to recognize the onset of micro-crack fracture signal.

• Economic and Environmental Geology
• /
• v.3 no.4
• /
• pp.199-222
• /
• 1970

One of the biggest sulfide metallic (Cu, Pb, Zn) ore deposits of South Korea is located in the area of Seo-myeon, Shiheung-gun, Gyeonggi-do. Geology of the region is mostly composed of metasediments of biotite schist, graphite schist, injection gneiss, sericite schist, limesilicate and quartzite from bottom, those are applicable to so-called Yeoncheon System of Pre-Cambrian, and granodiorite, quartz porphyry, basic dykes are outcroped in a small scope as intrusives. The origin of the ore deposit is pyrometasomatic contact deposits due to hydrothermal replacement and the ore bodies are imbedded in lower bed of limesilicate formation as impregnation and ore minerals are galena, sphalerite, marmatite, chalcopyrite, bornite, chalcocite, covellite, and the later two minerals are both hypogene and supergene. Gangue minerals are mostly skarn minerals those hornblende, diopside, epidote, hedenbergite, chlorite, garnet and quartz except primary calcite and quartz. Boundary plane (NS strike) between schists and limesilicate seemed to be primary opening of ore solution and fractures bearing $N50^{\circ}{\sim}80^{\circ}W$ are secondary structural control for localization of ore minerals and the third structural controls are both irregular gashes and schistosity in small scale. Photogeological study was carried with vertical aerial photo scaled 1: 38,000 and enlarged 1 : 10,000 under stereoscope. The study on the area convinced the fact that the geologic boundaries between rocks, limesilicates and quartzites, are traced easily by their typical topographic feature and drainage, and the main fracture patterns which derived from the result of fracture traces, that photogeologic lineament observed under stereoscope, are those bearing (1) $N20^{\circ}W$, (2) $N58^{\circ}W$, (3) $N76^{\circ}W$, (4) EW, (5) $N20^{\circ}W$, (6) $N62^{\circ}W$, (7) $N77^{\circ}W$. Among the written fractures, (5) (not schistosity, in case of fault) (6) (7) are post-mineral faults and others are pre-mineral faults and others are pre-mineral structures, and (2) (3) (6) (7) are coincided with statistical figure of 208 fractures surveyed in underground. By the result of the study, mineralized zone, are presumed to extend north and southward, total length about 4km.

• Economic and Environmental Geology
• /
• v.20 no.3
• /
• pp.169-177
• /
• 1987

The Manjang copper magnetite-fluorite orebodies are imbedded within the limestone beds of the Hwajonri Formation. The ore deposits are characterized by magnetite-fluorite bearing skarn orebody in the west orebody and copper sulfide veins of the central and main orebodies. This study includes fluid inclusion geothermometry, salinity analysis, stable isotope analysis, and application of phase rule to mineral associations in skarn ore. Ore minerals are closely associated with the skarn silicates such as garnet, wollastonite and epidote. Magnetite and fluorite are remarkable in the west orebody whereas chalcopyrite is dominate in the central and main orebodies where pyrite and pyrrhotite also appear as sulfide gangues. Homogenization temperature and salinity of fluid inclusions are measured ranging between $240^{\circ}C$ and $350^{\circ}C$, 6.3~12.9 wt. percent in quartz and $220^{\circ}C$ and $350^{\circ}C$, 8.5~9.9wt. percent in fluorite, respectively. This indicates that the filling temperature and salinity are higher in quartz than in fluorite with the tendency of both to be linearly decreased suggesting an attribution of meteoric water to the mineralization. $T-fo_2$ diagram in the Ca-Fe-Si system at 1 kb and $Xco_2$=0.02 shows that the mineral assemblages with decreasing temperature are andradite-hedenbergite-calcite, hedenbergite-andradite-quartz, magnetite-andradite-quartz, and magnetite-quartz-calcite, indicating that magnetite crystallizes mostly late skarn stage at lower temperature. According to the carbon and oxygen isotopic values of the host limestone and calcite in ores, the sourec of carbon might be mixture of host limestone and deep seated carbons. Sulfur isotope data imply that ore fluids be relatively homogeneous in sulfur isotopic composition, mainly derived from igneous source.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.45-48
• /
• 2004

RFID(Radio Frequency Identification) which is emerging from a change in digital convergence paradigm and recently rapidly advancing throughout the overall society is the core technology based on Ubiquitous network. In other words, This is a technology to identify the information of the object and recognize the situation by attaching electrical tag to an object and using Reader that can read the information of the object. With the emergence of the technology, it has turned the existing maintenance of the product into the network and intelligence of the product control by using the bar cord to maintain the product and will lead a revolution throughout overall society by affecting the fields of distribution and product maintenance as well as those of medicines, chemicals and food which the electrical tag can be attached to. this paper shows that utilizing the Bluetooth which is a local wireless telecommunication in the standalone imbedded system can implement the piconet configuration among the Readers and the data telecommunication with the main server