• Current Optics and Photonics
• /
• 제7권4호
• /
• pp.398-407
• /
• 2023

We explored a method to evaluate imaging performance for the optimal assembly of an endoscopic miniature lens and a sensor constituting an imaging module at the distal end of gastrointestinal endoscopy. For the assembly of the imaging module, the image sensor was precisely located at the focal plane when collimated light passed through the endoscopic lens. As another method, the distance between the lens and sensor was adjusted to obtain the highest focus index from images measured the star chart of the International Organization for Standardization (ISO) standard at various positions. We analyzed the slanted-edge modulation transfer function (MTF), corresponding depth of field, and number of line pairs for MTF 50% and 20% at each working distance within the range of 5-100 mm for imaging modules assembled in different ways. Assembly conditions of the imaging module with better MTF performance were defined for each working distance range of 5-30 mm and 30-100 mm, respectively. In addition to the MTF performance, the focus index of each assembled module was also compared. In summary, we examined the performance of imaging modules assembled with different methods within the suggested working distance and tried to establish the optimal assembly protocol.

• 대한임베디드공학회논문지
• /
• 제12권2호
• /
• pp.97-103
• /
• 2017

Thermal imaging is mainly used in military equipment required for night observation. In particular, technologies of uncooled thermal imaging detectors are being developed as applied to low-cost night observation system. Many system integrators require different specifications of the uncooled thermal imaging camera but their development time is short. In this approach, EOSYSTEM has developed a small size, TEC-less uncooled thermal imaging camera module with $32{\times}32mm$ size and low power consumption. Both domestic detector and import detector are applied to the EOSYSTEM's thermal imaging camera module. The camera module contains efficient infrared image processing algorithms including : Temperature compensation non-uniformity correction, Bad/Dead pixel replacement, Column noise removal, Contrast/Edge enhancement algorithms providing stable and low residual non-uniformity infrared image.

• 지구물리와물리탐사
• /
• 제5권3호
• /
• pp.150-156
• /
• 2002

본 연구에서는 현장에서도 쉽게 시추공 탄성파 토모그래피를 얻을 수 있는 소프트웨어를 개발하였다. 개발된 토모그래피 소프트웨어는 초동의 발췌 및 보정, 시추공 주시 토모그래피 모듈, 그리고 영상화 모듈로 구성되었다. 발췌한 초동을 탄성파 자료의 헤더에 저장함으로써, 초동을 보정하거나 시추공 주시토모그래피의 계산과정에서 부가적으로 초동을 발췌하지 않고 탄성파자료 입력만으로 자료처리를 수행할 수 있도록 하였다. 계산 후에는 영상화모듈을 통해 속도구조와 파선경로를 확인할 수 있다. 이 소프트웨어는 리눅스 환경에서 SU를 기반으로 개발되었으며, 사용에 용이한 GUI환경으로 제작하여 현장자료의 검토 및 초동 발췌, 발췌된 초동오차를 검토 및 보정의 용이성, 주시토모그래피의 생성 등 토모그래피 탐사법의 효용성을 향상시켰다.

• 마이크로전자및패키징학회지
• /
• 제23권1호
• /
• pp.29-34
• /
• 2016

본 연구에서는 생체 영상 이미징을 위한 다채널 필터 모듈 개발 및 특성 평가 연구를 수행하였다. 필터 모듈은 700 nm 및 800 nm 파장대의 근적외선 형광 이미징을 동시에 구현할 수 있도록 제작되었으며, 모듈의 특성 평가를 위해 magnification, exposure, gain의 변수에 따른 signal to back ground ratio (SBR)을 통한 대조영상 평가를 진행하였다. 또한 생체 영상 분석을 위해 신장 및 간의 광학적 특성이 동일한 생체 모사 조직인 phantom을 제작하여 두께에 따른 필터 모듈의 특성 및 광원의 주입량에 따른 특성 연구를 진행하였다. 제작된 필터 모듈은 magnification, exposure, gain의 변화에도 4이상의 SBR 차이를 보이며, kidney phantom 및 liver phantom의 경우 각각 50 mA, 60 mA의 광원 주입량에서 4이상의 SBR 대조 영상을 확인하였다.

• Current Optics and Photonics
• /
• 제5권5호
• /
• pp.532-537
• /
• 2021

We present a compact endoscopic probe in a needle form which has a fast beam-scanning capability for optical coherence tomography (OCT). In our study, a beam-scanning OCT imaging needle was fabricated with a 26G syringe needle (0.46 mm in outer diameter) and a thin OCT imaging probe based on the stepwise transitional core (STC) fiber. The imaging probe could freely rotate inside the needle for beam scans. Hence, OCT imaging could be performed without rotation or translation of the needle body. In our design, the structural integrity of the needle's steel tubing was preserved for mechanical robustness. Probing the optical signal was performed through the needle's own window formed at the end. For hand-held operation of our imaging needle, a light and compact scanner module (130 g and 45 × 53 × 60 mm³) was devised. Connected to the imaging needle, it could provide rotational actuation driven by a galvanometer. Because of its finite actuation range, our scanner module did not need a fiber rotary joint which might add undesirable complexity. The beam scan speed was 20 Hz and supported 20 frames per second at the maximum for endoscopic OCT imaging.

• 방사선산업학회지
• /
• 제8권3호
• /
• pp.147-153
• /
• 2014

This paper describes a large area CMOS image sensor module Implementation using the precision align inspection program. This work is needed because wafer cutting system does not always have high precision. The program check more than 8 point of sensor edges and align sensors with moving table. The size of a $2{\times}1$ butted CMOS image sensor module which except for the size of PCB is $170mm{\times}170mm$. And the pixel size is $55{\mu}m{\times}55{\mu}m$ and the number of pixels is $3,072{\times}3,072$. The gap between the two CMOS image sensor module was arranged in less than one pixel size.

• 한국광학회지
• /
• 제34권6호
• /
• pp.261-268
• /
• 2023

본 연구에서는 간단한 구조의 층밀림 간섭계 기반의 정량적 위상 이미징을 위한 미분 간섭 현미경 모듈을 제안한다. 제안하는 모듈은 복굴절성과 편광 광 분할기의 특성을 갖는 기하 위상 소자 중의 하나인 편광 격자를 이용하여 층밀림 간섭계 구조로 구성되고, 편광 카메라를 통해 획득된 4개의 편광 영상으로 정량적인 위상차 영상뿐만 아니라 일반적인 명시야 현미경 영상을 동시에 추출할 수 있다. 또한, 제안하는 모듈의 실시간 영상 획득 가능성, 안정성 및 소형화로 인해 기존의 현미경에 편리하게 적용할 수 있다. 제안하는 시스템을 검증하기 위해 다양한 시편에 대한 명시야 영상 및 위상차 영상을 획득하였고, 또한 이들 영상들을 합성하여 보다 가독성이 높은 시편 영상을 획득하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.267-270
• /
• 2006

COMS has two imaging payloads, MI (Meteorological Imager) and GOCI (Geostationary Ocean Colour Imager). In GOCI case, data are packaged per each slot - one part of 16 two-dimensional arrays for imaging sensors - so its generation algorithm is simple. But MI case, data are made up with sequences of 480 bit blocks and are transmitted to its ground station sequentially. Moreover there is no time information in each 480 bit MI block, so a system in its ground system should be attaching time information at received MI blocks. DM (Decomposition Module) is one module of IMPS that receives Raw Data from DATS and generates Level 0 Products that include time tagging. This paper explains DM design for MI of COMS payloads.

• 천문학회보
• /
• 제43권2호
• /
• pp.56.2-56.2
• /
• 2018

Ronchi test is an optical test to check the quality of an imaging system. Wavefront of the optical system can be obtained from the Ronchi patterns. In this poster, we present the Ronchi test module and the optical quality evaluation results. The test module consists of a light source, a pinhole, a beam splitter, a Ronchi ruling and a flat mirror. The test module can be simply adapted to any optical systems. We compare measured surface data for both aluminum and glass parabolic mirrors by analyzing the Ronchi patterns.

• 대한디지털의료영상학회논문지
• /
• 제11권1호
• /
• pp.35-41
• /
• 2009

This study was conducted to improve performance flow of PACS registration and output of external medical images by developing or adding File Transfer Protocol(FTP) Module on Order Communication System(OCS) and to upgrade efficiency of performance. The numbers of requests for examination of external medical images from January 2004 to December 2007 were investigated and the numbers of cases of examinations and losses were done respectively from January to June, 2007 as a period before the improvement and from July to December, 2007 as a period after it. Satisfaction of persons inputting external medical images of CD was asked directly before and after the improvement. When the numbers of requests for examination of external medical images from 2004 to 2007 2004 were investigated, they were 12,783, 16,774, 21,613 and 27,487 cases in 2004, 2005, 2005 and 2007 respectively. For the numbers of the requests from January to December, 2007 it was the lowest in February by recording 1846 and it was 2800 in October. While the number of loss of external medical images was averagely 3.6 before using FTP Module on OCS, it reduced to 0 and satisfaction increased to 98% after it. By utilizing FTP Module on OSC for PACS registration of external medical images, the images were delivered simultaneously with occurrence of order, PACS registration of many patients was conducted together and CDs were returned to patients immediately after sending images from outpatient clinics or wards to remove possibility of losing them. In addition, because the module was established on OCS and data were sent associated with order, problems related with order were decreased. By eliminating movement distance it was turned out to be very effective in terms of time and space.